in need of someone to help me with wiring issues in tucson az
#1
Registered User
Thread Starter
in need of someone to help me with wiring issues in tucson az
im new to the forum tank you.
i have a 2003 350z turing automatic.
I have some issues with te wiring on my car and its on limp mode
please hit me up if you can help me in tucson az.
529-906-9050
i have a 2003 350z turing automatic.
I have some issues with te wiring on my car and its on limp mode
please hit me up if you can help me in tucson az.
529-906-9050
Last edited by poloaa1; 09-13-2017 at 01:01 PM.
#2
General & DIY Moderator
MY350Z.COM
MY350Z.COM
iTrader: (64)
Welcome, but I doubt you'll find many members who have to training and expertise to help you with a wiring issue. Your best bet Is to hire a trained Nissan tech to help you with such an issue.
The following users liked this post:
poloaa1 (09-13-2017)
#3
Registered User
Thread Starter
found the problem bad ecu...
i found out that te cause of the short, is my ecu... not giving power to my pedal positioning sensor....
will replace the ecu and the harness as im unsure of the condition of the wires inside of it.
will replace the ecu and the harness as im unsure of the condition of the wires inside of it.
#4
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
What is TE ?
Trending Topics
#8
Registered User
Thread Starter
Ecu was bad....
my ecu was bad...
car now works normal, tanks to everyone with the support
and tankyou for the mechanic (turning ratchets garage) I will take my car there for a complete diagnostic tanks
car now works normal, tanks to everyone with the support
and tankyou for the mechanic (turning ratchets garage) I will take my car there for a complete diagnostic tanks