I have a 2006 350z with rev up engine. Is there a different procedure for setting the timing chains than on a non rev- up engine? Just finished a build on this one and I’m getting a no spark condition.

any help is appreciated

I set it with the circle marks on bank 1 and the squares on bank 2.

the marks on the main chain were spot on but the secondary chains are making me wonder

 

Looks like the red NAT light is staying on on the dash. Can’t get it to turn off

 

Doesnt the solid red light mean you have a NATS issue?

 

Yes, solid red security light would indicate a NATS malfunction. That could be your whole problem right there. We can bypass it completely with an Uprev reflash

 

Got the NAT disabled by uprev. Still no start. Disconnected the driver side exhaust cam sensor and the car will start and idle but gas pedal will not rev it up. So im still wondering if there is a timing issue. replaced that sensor and the issue is still the same.

Thanks for any answers.