Nismo Or Jwt Cams For Hp Gains
#1
Thread Starter
Registered User
iTrader: (1)
Joined: Jun 2004
Posts: 448
Likes: 0
From: Massachusetts
Nismo Or Jwt Cams For Hp Gains
Witch cams are better for horsepower and toque gains nismos or JWT.
For mods i have a apexi cold air intake, unorthrodox racing pulley, crawford plenum, crawford cats, crawford headers, Injen exhaust, grounding kit, and ecu reflash some from technosqaure soon. Can someone please tell me witch cams would be better for these mods, and do i need to have another reflash after my cams are installed.
Thanks Glen
For mods i have a apexi cold air intake, unorthrodox racing pulley, crawford plenum, crawford cats, crawford headers, Injen exhaust, grounding kit, and ecu reflash some from technosqaure soon. Can someone please tell me witch cams would be better for these mods, and do i need to have another reflash after my cams are installed.
Thanks Glen
#3
i beleive the nimos are made for more low end torque and the jwt is made for higher up in the powerband...i dont know know much though about the nismo cams...so dont take my word....JWT though is the way to go alot of people on the boards are using them...people say they "scream" after 4k...and yes i do beleive you will need to reflash your ecu...i dont think it costs that much more to redo ecu....i also beleive with certain cams you need your idle raised just a tad like 900 rpms...but dont take my word for granted...im not exactley sure...cams are very hard to understand with the lift and duration..
Ben
Ben
#5
oh ok....i forgot that you just had them installed my bad...are you liking them??? i know i would...i just need those crawford headers and then cams....i want them sooo bad...
Ben
Ben
#6
Thread Starter
Registered User
iTrader: (1)
Joined: Jun 2004
Posts: 448
Likes: 0
From: Massachusetts
My car pulls like a monster now i love it. Im gonna dyno again to make sure my AF is perfect if its not technosqaure will fix it with one more reflash, but hopefullly they got it correct the first time.
Thanks Glen
Thanks Glen
#7
Good stuff hope you enjoy it...but see if you can help me out by putting up a video or something at this link....
https://my350z.com/forum/showthread....threadid=90987
thanks dude
Ben
https://my350z.com/forum/showthread....threadid=90987
thanks dude
Ben
Trending Topics
#8
Re: Nismo Or Jwt Cams For Hp Gains
Originally posted by Zmego1985
Witch cams are better for horsepower and toque gains nismos or JWT.
For mods i have a apexi cold air intake, unorthrodox racing pulley, crawford plenum, crawford cats, crawford headers, Injen exhaust, grounding kit, and ecu reflash some from technosqaure soon. Can someone please tell me witch cams would be better for these mods, and do i need to have another reflash after my cams are installed.
Thanks Glen
Witch cams are better for horsepower and toque gains nismos or JWT.
For mods i have a apexi cold air intake, unorthrodox racing pulley, crawford plenum, crawford cats, crawford headers, Injen exhaust, grounding kit, and ecu reflash some from technosqaure soon. Can someone please tell me witch cams would be better for these mods, and do i need to have another reflash after my cams are installed.
Thanks Glen
As told by JWT, the Nismo’s where designed by them and theirs is an improved version of the Nismo’s with a little more R&D.
STILL the Nismo’s are a great mod.
I went with JWT.
#10
Originally posted by Z1 Performance
the highest dynos we have seen to date have all used Tomei cams
the highest dynos we have seen to date have all used Tomei cams
I guess it figures because the Tomei cams are more radical than the JWT and Nismo. But the re-programming of the ECU is a MUST! At least for the most radical of the bunch…
That is why I didn't install the Tomei cams, my Z is a 2004, no TECHNOS ECU upgrade yet.
#11
Originally posted by Z1 Performance
the highest dynos we have seen to date have all used Tomei cams
the highest dynos we have seen to date have all used Tomei cams
#12
For mods i have a apexi cold air intake, unorthrodox racing pulley, crawford plenum, crawford cats, crawford headers, Injen exhaust, grounding kit, and ecu reflash some from technosqaure soon.
#15
Originally posted by L.A. Roadster
Javi,
Were you able to up the idle on your 04? If not how did you deal with the issue of stalling?
Javi,
Were you able to up the idle on your 04? If not how did you deal with the issue of stalling?
About the stalling issues, I’m used to it now. What I do is that I don’t depress the clutch until I almost stop, and keep the air conditioner most of the time on.
#16
The factory bucket lifters come in 28 flavors to compensate for manufacturing and installed variations, so why would you expect aftermarket cams to be better than factory tolerances.
The cams are probably closer to perfect than the installed valves and spring seat to valve seat distances.
Not sure how members will be able to resell cars with cams as they are responsible for emission tampering and can be forced to return the car to oem by subsequent buyers at a later date.
Always launder [if they don't catch it for 30 days] the car thru a dealer to limit future liability......AS IS doesn't protect you in a direct sale to an Individual from emission tampering charges and restoration............different states are different and haven't caught up to California yet.
The cams are probably closer to perfect than the installed valves and spring seat to valve seat distances.
Not sure how members will be able to resell cars with cams as they are responsible for emission tampering and can be forced to return the car to oem by subsequent buyers at a later date.
Always launder [if they don't catch it for 30 days] the car thru a dealer to limit future liability......AS IS doesn't protect you in a direct sale to an Individual from emission tampering charges and restoration............different states are different and haven't caught up to California yet.
#17
Well so far the Tomei cams are the only ones on the market that I know of that have required different buckets!! The JWTs and Nismos have been just fine. I contribute this to quality control and attention to detail. BTW, the Nismo cams were made by JWT so in a sense JWT really did their homework.
#18
Perhaps older versions of the cams required buckets, but to my knowledge newer ones (sold this year) do not...only thing needed are springs for the 264 and 268 setups.
Javi - we ahve not dynoed cams as a standalone mod as its pretty difficult to do...all the cam setups have been done along with other mods at the same time to minimize install cost and to make tuning simpler for the owner. But do some searches for Tomei and dynos..a few people have posted them.
Looks like I'll be going with the 268's on my car
Javi - we ahve not dynoed cams as a standalone mod as its pretty difficult to do...all the cam setups have been done along with other mods at the same time to minimize install cost and to make tuning simpler for the owner. But do some searches for Tomei and dynos..a few people have posted them.
Looks like I'll be going with the 268's on my car
#19
Well, I contacted SGP this summer before I purchased the cams to have Doug at Crawford install them. I was told from SGP that the Tomei cams still required bucket swapping. I would have been all over the 264's had this not been the case.