I have a 2006 motor that was pulled out of my g35 when it only had 2,800 miles.

There was nothing wrong with it, it was pulled when nearly new to get built and put back in.

Well, it was built and never put back in, an LS2 was used in its place
The motor has never been put in a car since being built... it is brand new!!!

I have an entire build sheet and all reciepts upon request.

For a basic run down of what it has...

Crowler cams
CP pistons 11:1 compression
ported polished and flow tested heads
ARP hardware throughout
billet pullies
Low temp thermostat
Fully blueprinted, balanced etc.

It is 100% complete, including all accessories (basicly brand new), intake to oil pan

It is ready to bolt in and go with somewhere around 400hp

Entire motor was built by Rex Hutchingson racing engines in Sacramento

I have all brackets, hardware, powersteering pump, ac compressor, all other misc items as well even though they aren't in the photo.

Close to 10k spent on entire build

Asking 5,000

Located in Livermore CA
Will ship at buyers expense

Please e-mail text or call me at 925-519-5547 or extremeyota@netscape.net

Thanks,
Gary

 

here are some more photos in the daylight and showing some of the other stuff it comes with... also a couple pics of the stock pistons that will come with just to show how fresh this motor is even when it was pulled apart!!

 

Did I miss it...are the rods stock?

 

rods are stock, it was going to be a N/A motor so we opted to use oem

 

i still have it, make an offer

 

Nice! What BC cam set did you go with (stage)?

 

stage 2, heres a link to the ams http://www.briancrower.com/view.php?pn=bc0221

 

I still have it

 

Nice Motor, pardon my probably stupid question, but on the VQ, arent the stock rods considered to be a "weak point". Thanks and glws

 

This is a Rev-up motor correct? Also, did the building shop include any warranty on the engine? And finally, you said it currently has 400hp just from the build?

 

stock rods are indeed the weakest point of the engine. why the op would leave them in the engine is crazy.. at least get some cheap eagle rods..

 

Title is misleading. It's not "fully built" without strengthened rods!

 

Indeed, I'd be really interested if it didn't have stock rods...

 

Question: do you have a dyno sheet to show that it has actual 400hp?