i need to get a 10 gauge wire from the cabin to the battery to run a fuse box ... the 10gauge wire will be dedicated hooked to the positive terminal and any way to get it into the cabin will work ... but preferably i want it to go through the driver's side ... thanks in advance!
-Rami

 

there are a bunch of wires that come from the outside to the inside of the cabin. It's covered with black electric tape, you can follow it from the inside. It's just a matter of seeing from the outside where it pokes out.

 

A bundle of wires runs through a rubber grommet that is right behind the battery, you'll need to remove the plastic parts from around the batter to reach it. Carefully cut a small hole in the grommet and push the wire into the cabin, then you can see the end from the passenger footwell and pull it in.

 

or you can use something rigid (a straightened metal coat hanger works well) and get it through the hole all the way into the footwell first, then tape the wire to the end of the coat hanger and snake it through.

 

There is a harness that runs from the left side into the cabin if you take the cover of you can see it....but its pretty tight in there your gonna have to take the cowle screen off to get at it....

 

found it! thanks guys ... i finished a huge interior LED lighting project ... theme is Red vs Blue ... everyone who's seen it says it looks good but ill post pics in not too long