Carbon Fiber Veilside Version 2 Hood
03-28-2006, 10:33 AM
#1
Registered User
Thread Starter
Carbon Fiber Veilside Version 2 Hood
Ok so I have a 2003 350Z Enthusiast with a Veilside Version 2 front bumper, rear bumper, side skirts, aero mirrors and a Nismo wing. I recently saw a picture of a 350Z with a full Veilside Version 3 kit with a black carbon fiber hood and thought it looked good. Should I might as well get the matching hood or is it too ricy?? Watchu guys think?? 
03-28-2006, 01:54 PM
#3
Vendor - Former Vendor
iTrader: (208)
Join Date: Dec 2004
Location: Arizona
Posts: 2,038
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
The fittement issues on VeilSide V3 Z33 CF hoods have all been remedied. I personally have sold 3 of them from the last 2 containers, having recieved nothing but great responses on the fittment. VeilSide Japan replaced all of their molds for this part, and hence, the fittment is rad.
Sales line*
In stock.......
The fittement issues on VeilSide V3 Z33 CF hoods have all been remedied. I personally have sold 3 of them from the last 2 containers, having recieved nothing but great responses on the fittment. VeilSide Japan replaced all of their molds for this part, and hence, the fittment is rad.
Sales line*
In stock.......
03-28-2006, 02:12 PM
#5
Registered User
Thread Starter
Originally Posted by Bubble
Velside 3 hood has problem with fitting issue. Try Seibon VT (same design) I would paint to match with the car. CF looks ricy (IMO)
BTW, where in north cal are you? i want to check out the V2 bumper.
BTW, where in north cal are you? i want to check out the V2 bumper.
03-28-2006, 02:13 PM
#6
Registered User
Thread Starter
Originally Posted by INTENSEPOWER
Hello,
The fittement issues on VeilSide V3 Z33 CF hoods have all been remedied. I personally have sold 3 of them from the last 2 containers, having recieved nothing but great responses on the fittment. VeilSide Japan replaced all of their molds for this part, and hence, the fittment is rad.
Sales line*
In stock.......
The fittement issues on VeilSide V3 Z33 CF hoods have all been remedied. I personally have sold 3 of them from the last 2 containers, having recieved nothing but great responses on the fittment. VeilSide Japan replaced all of their molds for this part, and hence, the fittment is rad.
Sales line*
In stock.......
03-28-2006, 02:29 PM
#7
Vendor - Former Vendor
iTrader: (208)
Join Date: Dec 2004
Location: Arizona
Posts: 2,038
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
Thanks for the inquiry. No, the V3 hood has 3 vents on each side, and a single vent in the middle:
http://intensepower.com/veve3cafiho3.html
The V2 hood is identical, save the fact that there is no center vent:
http://intensepower.com/veve2cafiho3.html
As far as the Autotecknic Carbon Fiber Eyelines are concerned, we have sold a number of sets. I don't recall ever hearing of any of our customers reporting ill fittment. Hope this helps.
Thanks for the inquiry. No, the V3 hood has 3 vents on each side, and a single vent in the middle:
http://intensepower.com/veve3cafiho3.html
The V2 hood is identical, save the fact that there is no center vent:
http://intensepower.com/veve2cafiho3.html
As far as the Autotecknic Carbon Fiber Eyelines are concerned, we have sold a number of sets. I don't recall ever hearing of any of our customers reporting ill fittment. Hope this helps.
Trending Topics
03-28-2006, 02:43 PM
#9
Vendor - Former Vendor
iTrader: (208)
Join Date: Dec 2004
Location: Arizona
Posts: 2,038
Likes: 0
Received 0 Likes
on
0 Posts
Alex,
Nay. Kenstyle's only being brought over as full kits right now. I don't see that changing either, as that's been the deal with the G35 coupe for a good minute now.
Nay. Kenstyle's only being brought over as full kits right now. I don't see that changing either, as that's been the deal with the G35 coupe for a good minute now.
03-28-2006, 02:49 PM
#10
Registered User
iTrader: (25)
Join Date: Aug 2004
Location: Goochland , VA
Posts: 4,402
Likes: 0
Received 0 Likes
on
0 Posts
Been looking at CF hoods for a long time just not enough out there to pick from. anything new coming out soon? If not I am going to cut my OEM up and make some rad vents
03-28-2006, 03:40 PM
#11
Registered User
iTrader: (5)
Join Date: Jan 2003
Location: Shelby Twp, Michigan
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by INTENSEPOWER
Hello,
The fittement issues on VeilSide V3 Z33 CF hoods have all been remedied. I personally have sold 3 of them from the last 2 containers, having recieved nothing but great responses on the fittment. VeilSide Japan replaced all of their molds for this part, and hence, the fittment is rad.
Sales line*
In stock.......
The fittement issues on VeilSide V3 Z33 CF hoods have all been remedied. I personally have sold 3 of them from the last 2 containers, having recieved nothing but great responses on the fittment. VeilSide Japan replaced all of their molds for this part, and hence, the fittment is rad.
Sales line*
In stock.......
09-06-2006, 08:59 PM
#13
Registered User
iTrader: (6)
Join Date: Nov 2005
Location: Cali
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Is that a real pic of the V2 hood? it looks like a photoshop of the V3 
Originally Posted by INTENSEPOWER
Hello,
Thanks for the inquiry. No, the V3 hood has 3 vents on each side, and a single vent in the middle:
http://intensepower.com/veve3cafiho3.html
The V2 hood is identical, save the fact that there is no center vent:
http://intensepower.com/veve2cafiho3.html
As far as the Autotecknic Carbon Fiber Eyelines are concerned, we have sold a number of sets. I don't recall ever hearing of any of our customers reporting ill fittment. Hope this helps.
Thanks for the inquiry. No, the V3 hood has 3 vents on each side, and a single vent in the middle:
http://intensepower.com/veve3cafiho3.html
The V2 hood is identical, save the fact that there is no center vent:
http://intensepower.com/veve2cafiho3.html
As far as the Autotecknic Carbon Fiber Eyelines are concerned, we have sold a number of sets. I don't recall ever hearing of any of our customers reporting ill fittment. Hope this helps.
09-07-2006, 04:50 AM
#14
Originally Posted by PumpedVA
Been looking at CF hoods for a long time just not enough out there to pick from. anything new coming out soon? If not I am going to cut my OEM up and make some rad vents
09-07-2006, 08:27 AM
#15
Vendor - Former Vendor
iTrader: (208)
Join Date: Dec 2004
Location: Arizona
Posts: 2,038
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by liudacris
Is that a real pic of the V2 hood? it looks like a photoshop of the V3
Lol, I wish it were photoshop, as our IT guy would be King Hussein of the computer graphics world. If you notice, there's a reflection in each of the hoods showing a small portion of our old shop's showroom. You can see a water cooler, a rack w/ a wheel on it, etc. If my IT guy could photoshop and be THAT good... sheeiittt.. man, we couldn't afford him.. ahahah.. D.
09-13-2006, 02:27 PM
#17
Vendor - Former Vendor
iTrader: (208)
Join Date: Dec 2004
Location: Arizona
Posts: 2,038
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
Thanks for the inquiry. No stock here or at VeilSide USA. They're only receiving 2 of them in their next container (end of Sep) so if you'd like to order, please PM me for pricing as you'll most likely need to pre-order to secure that one is held for you/us. D.
Thanks for the inquiry. No stock here or at VeilSide USA. They're only receiving 2 of them in their next container (end of Sep) so if you'd like to order, please PM me for pricing as you'll most likely need to pre-order to secure that one is held for you/us. D.
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM
