Top Secret CF rear diffuser (pics)
09-19-2006, 09:40 AM
#130
Originally Posted by Chebosto
when i get home tonite from work/school i'll try to fit some of my hardware onto the pop rivet-
worse comes to worse, you can drill those out and replace them with the correct size with the bolts that came with it.
worse comes to worse, you can drill those out and replace them with the correct size with the bolts that came with it.
09-19-2006, 09:47 AM
#131
Originally Posted by Nitrouz
yea but DRILL into dry CF and clearcoat? scary...
all you need to do it remove the backing of the rivet and insert- not too hard, you can use a dremel..
this is how you can move pedistals for CF wings wider and move / install vertical stabilizers.. which i might suggest for even more oneoff-ish-ness. (new word!)
similar to:
09-19-2006, 10:37 AM
#132
Originally Posted by Nitrouz
yea but DRILL into dry CF and clearcoat? scary...
09-19-2006, 10:39 AM
#133
Originally Posted by buzzardmountain
Alex, are you sticking with the Greddy exhaust even though you're going with the APS Extreme kit? I was just wondering if you'd planned to eventually go with the APS 3" kit and what that meant as far as fitament with the diffuser.
09-19-2006, 11:14 AM
#134
Originally Posted by Nitrouz
I sold my HKS Hi-Power Ti true dual because of the extreme kit, and yes I bought the Greddy just for the extreme kit. I'm aiming for high power output, yes, but not to compromise TOO much streetability and sound...and I really hate how loud the 3" pipes are.
OT - Cheston, you're not helping my situation by putting up those 3 new pics of the front bumper.
They look sooooooo good!
09-19-2006, 10:01 PM
#137
nitro:
good news: i have multiple bolts that fit the thread.
bad news: i dont know what size they are haha..
well. using a ruler,
i measured thread peak to peak, ~ 1.25mm.. giving the thread pitch to be M1.25.. i think this is classified as a 'fine' thread... so look for a bolt that has the thread diameter,approximately 5mm
if i have time i'll drop by Home Depot Racing Dept and double check.. but that should be good enough on your end to pick up a bolt-.. i'd suggest getting the matching locknut too---
good news: i have multiple bolts that fit the thread.
bad news: i dont know what size they are haha..
well. using a ruler,
i measured thread peak to peak, ~ 1.25mm.. giving the thread pitch to be M1.25.. i think this is classified as a 'fine' thread... so look for a bolt that has the thread diameter,approximately 5mm
if i have time i'll drop by Home Depot Racing Dept and double check.. but that should be good enough on your end to pick up a bolt-.. i'd suggest getting the matching locknut too---
09-19-2006, 10:09 PM
#138
Originally Posted by Chebosto
nitro:
good news: i have multiple bolts that fit the thread.
bad news: i dont know what size they are haha..
well. using a ruler,
i measured thread peak to peak, ~ 1.25mm.. giving the thread pitch to be M1.25.. i think this is classified as a 'fine' thread... so look for a bolt that has the thread diameter,approximately 5mm
if i have time i'll drop by Home Depot Racing Dept and double check.. but that should be good enough on your end to pick up a bolt-.. i'd suggest getting the matching locknut too---
good news: i have multiple bolts that fit the thread.
bad news: i dont know what size they are haha..
well. using a ruler,
i measured thread peak to peak, ~ 1.25mm.. giving the thread pitch to be M1.25.. i think this is classified as a 'fine' thread... so look for a bolt that has the thread diameter,approximately 5mm
if i have time i'll drop by Home Depot Racing Dept and double check.. but that should be good enough on your end to pick up a bolt-.. i'd suggest getting the matching locknut too---
I'm getting the car shell back tomorrow...
09-19-2006, 10:11 PM
#139
hey nitrouz bad*** setup your car looks like my twin check it out good luck w/ the diffuser your car looks sick i want your headlights and tails but sick car looks amazing http://www.motor-elite.com/cars/070606/
09-19-2006, 10:28 PM
#140
Originally Posted by azn_speedracer
hey nitrouz bad*** setup your car looks like my twin check it out good luck w/ the diffuser your car looks sick i want your headlights and tails but sick car looks amazing http://www.motor-elite.com/cars/070606/