Top Secret CF rear diffuser (pics)
#41
Registered User
iTrader: (27)
Join Date: May 2003
Location: Austin TX
Posts: 1,614
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gringott
Although I have spent a lot of time on my back looking at the undercarriage of my Z, I looked at the area where this goes again, and I can see that two things are going on.
A rectangular crossbeam about 3 to 4 inches deep crosses the trunk bottom toward the front of the car in relationship to the stock muffler location.
The huge aluminum crossmember that the suspension bolts to is in front of that.
So, my thought is, if this piece's front edge (the edge toward the front of the car) is higher than the low part of the first crossmember, then little or no airflow will "push down" on this part, which was one thing I wondered about when it was reveled that it only attached at the sides and rear.
Now vacuum is another animal.
A rectangular crossbeam about 3 to 4 inches deep crosses the trunk bottom toward the front of the car in relationship to the stock muffler location.
The huge aluminum crossmember that the suspension bolts to is in front of that.
So, my thought is, if this piece's front edge (the edge toward the front of the car) is higher than the low part of the first crossmember, then little or no airflow will "push down" on this part, which was one thing I wondered about when it was reveled that it only attached at the sides and rear.
Now vacuum is another animal.
"A rear diffuser, otherwise known as a venturi, isdesigned to create a low-pressure or vacuum area under the rear of the car using a physics principle known as the Venturi effect. In essence, a diffuser is like an air channel that is designed to accelerate the air out from underneath the back of the car and help to both minimize underbody wind turbulence and to create negative lift at the rear of the car."
#53
Registered User
iTrader: (5)
Join Date: May 2005
Location: america
Posts: 4,190
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gringott
Shhhhh - it's top secret.
heh jk so your saying these are special real flames? I like cars to be clean. So far its very clean so I know hes got good taste. I hope these will be the coolest flames ever.
#54
Originally Posted by saberphx
Yes, its a Top Secret diffuser, we all know that.
heh jk so your saying these are special real flames? I like cars to be clean. So far its very clean so I know hes got good taste. I hope these will be the coolest flames ever.
heh jk so your saying these are special real flames? I like cars to be clean. So far its very clean so I know hes got good taste. I hope these will be the coolest flames ever.
#57
Originally Posted by o snap its eric
can you not install the side curve parts? I see that the diffuser comes in 3 parts. i think without the extra side parts the diffuser is sweet.
#59
going to the bodyshop tomorrow. GTNPU Z went today and checked on my car for me...said the fade job on the hood is SICK!! I have to check it out in person tomorrow, and hopefully do some test fitting with the diffuser. I'll post pics if I do get to the test fitting.