Top Secret CF rear diffuser (pics)
#1
Top Secret CF rear diffuser (pics)
I've received many PM's to see what these look like, and if they'll clear certain exhausts, etc etc...
so I took it out of the box, and took a couple pics. They are in 3 pieces...center piece, and the 2 side vortex generators. There are also brackets to install them on the car.
here's what it looks like:
And many are wondering how far it stretches underneath the car where the muffler area goes, so I took this pic with my PS2 remote to show the approximate length... I have the Greddy evoTT exhaust, so the muffler is relatively big compared to other mufflers...so we might have to cut a chunk off that part to make it fit. i don't know yet...havne't even test fitted it. I should have it installed next week, and I'll let you know what we did to make it fit, if we had to do anything at all.
Hope this helps answer a few questions, especially in the TS or DAMD replica thread.
so I took it out of the box, and took a couple pics. They are in 3 pieces...center piece, and the 2 side vortex generators. There are also brackets to install them on the car.
here's what it looks like:
And many are wondering how far it stretches underneath the car where the muffler area goes, so I took this pic with my PS2 remote to show the approximate length... I have the Greddy evoTT exhaust, so the muffler is relatively big compared to other mufflers...so we might have to cut a chunk off that part to make it fit. i don't know yet...havne't even test fitted it. I should have it installed next week, and I'll let you know what we did to make it fit, if we had to do anything at all.
Hope this helps answer a few questions, especially in the TS or DAMD replica thread.
#5
Dr. Wired
iTrader: (2)
Originally Posted by Nitrouz
thanx.
I was rear ended, so my cwest rears are screwed. I wanted to go cwest again, but it's backordered for god knows how long..so I opted for these instead. Should look alright. But the question is fitment...
I was rear ended, so my cwest rears are screwed. I wanted to go cwest again, but it's backordered for god knows how long..so I opted for these instead. Should look alright. But the question is fitment...
Last edited by Wired 24/7; 09-07-2006 at 12:40 AM.
Trending Topics
#10
Registered User
Join Date: Dec 2005
Location: Bahrain
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nitrouz
I've received many PM's to see what these look like, and if they'll clear certain exhausts, etc etc...
so I took it out of the box, and took a couple pics. They are in 3 pieces...center piece, and the 2 side vortex generators. There are also brackets to install them on the car.
here's what it looks like:
And many are wondering how far it stretches underneath the car where the muffler area goes, so I took this pic with my PS2 remote to show the approximate length... I have the Greddy evoTT exhaust, so the muffler is relatively big compared to other mufflers...so we might have to cut a chunk off that part to make it fit. i don't know yet...havne't even test fitted it. I should have it installed next week, and I'll let you know what we did to make it fit, if we had to do anything at all.
Hope this helps answer a few questions, especially in the TS or DAMD replica thread.
so I took it out of the box, and took a couple pics. They are in 3 pieces...center piece, and the 2 side vortex generators. There are also brackets to install them on the car.
here's what it looks like:
And many are wondering how far it stretches underneath the car where the muffler area goes, so I took this pic with my PS2 remote to show the approximate length... I have the Greddy evoTT exhaust, so the muffler is relatively big compared to other mufflers...so we might have to cut a chunk off that part to make it fit. i don't know yet...havne't even test fitted it. I should have it installed next week, and I'll let you know what we did to make it fit, if we had to do anything at all.
Hope this helps answer a few questions, especially in the TS or DAMD replica thread.
#11
Thanks for the picts.
more importantly, can you take pictures of the mounting hardware that came with it? i'm interested in where it mounts near the sides of the bumper, and where they're attached on the leading edge of the diffuser- from the picts. it looks like its just the four on the sides and two in the rear where it drills into the stock rear bumper- yikes! how is that supposed to support the vaccum affect generated?
it looks like if you have any type of mudflaps, they have to be removed since the vortex generators stick out so much behind the rear wheel..
thanks again for the picts-
more importantly, can you take pictures of the mounting hardware that came with it? i'm interested in where it mounts near the sides of the bumper, and where they're attached on the leading edge of the diffuser- from the picts. it looks like its just the four on the sides and two in the rear where it drills into the stock rear bumper- yikes! how is that supposed to support the vaccum affect generated?
it looks like if you have any type of mudflaps, they have to be removed since the vortex generators stick out so much behind the rear wheel..
thanks again for the picts-
#12
Originally Posted by Chebosto
Thanks for the picts.
more importantly, can you take pictures of the mounting hardware that came with it? i'm interested in where it mounts near the sides of the bumper, and where they're attached on the leading edge of the diffuser- from the picts. it looks like its just the four on the sides and two in the rear where it drills into the stock rear bumper- yikes! how is that supposed to support the vaccum affect generated?
it looks like if you have any type of mudflaps, they have to be removed since the vortex generators stick out so much behind the rear wheel..
thanks again for the picts-
more importantly, can you take pictures of the mounting hardware that came with it? i'm interested in where it mounts near the sides of the bumper, and where they're attached on the leading edge of the diffuser- from the picts. it looks like its just the four on the sides and two in the rear where it drills into the stock rear bumper- yikes! how is that supposed to support the vaccum affect generated?
it looks like if you have any type of mudflaps, they have to be removed since the vortex generators stick out so much behind the rear wheel..
thanks again for the picts-
#17
Originally Posted by alshawi
Thank God some1 bought it with me as well as decided to intsall it before i do. I actually got a whole kit but im still waiting for it to get shipped. Nitrouz was it easy to attach the side generators? whats the size of ur muffler, cos i have a huge muffler as well, Invidia exhaust. Plz keep us posted. Thanks
my muffler is wayyy bigger than your Invidias. If you've seen the Greddy's, you know what I mean.