When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
im wondering if you use the already present center hole, grind down the other two posts and use 3m?
Thats what you would do, 3M tape can hold it, just take a hairdryer and heat the tape up and then put the emblem on when the tape is hot and then hold on for 30 seconds and it will hold for a REALLY long time!!
You do not need to drill more holes for petes sake!!
On a side note. If you plan on putting the emblem on You'll need to flex the emblem a little. Our z is very curvy in the back and the emblem isn't shaped for us. Good luck!!
wow i'm surprised how little about the Z history that many owners here are aware of.
The badge is from the original Datsun S30 (240z, 260z, 280z JDM). This badge is NOT from the 300zx nor the 280zx or any of the ZX series. This badging can be found from any place that sells badges for pre 1978 Datsun Z cars (S30 chassis, once again).