ATTN::::CarbonLTD...please read...
10-31-2006, 10:00 PM
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: New York
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
ATTN::::CarbonLTD...please read...
Still no word on the customers you sold the seibon fenders to about how the install and fitment was? if they needed a lot of prep work or if they fit pretty good???
if anyone else here has the seibon fenders or the sarona fenders please post how they fit...i heard 1 person say excellent fitment for sarona and some1 said there was a lot of prep work to get them to fit perfect...anyone??
if anyone else here has the seibon fenders or the sarona fenders please post how they fit...i heard 1 person say excellent fitment for sarona and some1 said there was a lot of prep work to get them to fit perfect...anyone??
11-01-2006, 10:33 AM
#3
Registered User
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: New York
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CarbonLTD
yeah...he hasn't installed them yet. I'll post them up once he gets them fitted and painted.
Edit: Here's some sarona fenders on tonester1011 cars
Edit: Here's some sarona fenders on tonester1011 cars
yea i really like these fenders those look nice on that z too...but yet again i dont know how much that person went through on getting them installed you know? they could of fit perfect or could of costed $$$ to prep them...but keep me updated...thanks
11-01-2006, 02:08 PM
#5
I just realized the seibon vents are higher up on the fender than the sarona by a few inches
the horizontal line that goes thru the door will not continue on thru the top of the vent like on the sarona, but instead is located more in the middle of the vent
attached is a photoshop of my car showing what I mean, but even just eyeballing them, you can note the distance from the tops and bottoms of the fenders to the vent. The vent is clearly located in a different position and the size of the vents are different as well
What I have never figured out is the 10mm wider thing with the seibons. Seems to me like it'd make your wheel arch crooked or add unnecessary drag since it's not like the front bumper is also going to be 10mm wider, which is still part of the wheel arch
the horizontal line that goes thru the door will not continue on thru the top of the vent like on the sarona, but instead is located more in the middle of the vent
attached is a photoshop of my car showing what I mean, but even just eyeballing them, you can note the distance from the tops and bottoms of the fenders to the vent. The vent is clearly located in a different position and the size of the vents are different as well
What I have never figured out is the 10mm wider thing with the seibons. Seems to me like it'd make your wheel arch crooked or add unnecessary drag since it's not like the front bumper is also going to be 10mm wider, which is still part of the wheel arch
Last edited by sentry65; 11-01-2006 at 02:18 PM.
11-01-2006, 02:46 PM
#6
Registered User
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: New York
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sentry65
I just realized the seibon vents are higher up on the fender than the sarona by a few inches
the horizontal line that goes thru the door will not continue on thru the top of the vent like on the sarona, but instead is located more in the middle of the vent
attached is a photoshop of my car showing what I mean, but even just eyeballing them, you can note the distance from the tops and bottoms of the fenders to the vent. The vent is clearly located in a different position and the size of the vents are different as well
What I have never figured out is the 10mm wider thing with the seibons. Seems to me like it'd make your wheel arch crooked or add unnecessary drag since it's not like the front bumper is also going to be 10mm wider, which is still part of the wheel arch
the horizontal line that goes thru the door will not continue on thru the top of the vent like on the sarona, but instead is located more in the middle of the vent
attached is a photoshop of my car showing what I mean, but even just eyeballing them, you can note the distance from the tops and bottoms of the fenders to the vent. The vent is clearly located in a different position and the size of the vents are different as well
What I have never figured out is the 10mm wider thing with the seibons. Seems to me like it'd make your wheel arch crooked or add unnecessary drag since it's not like the front bumper is also going to be 10mm wider, which is still part of the wheel arch
Trending Topics
11-01-2006, 03:13 PM
#9
hatersgonnahate
iTrader: (162)
have you looked at erebuni shark style fenders. http://www.erebunicorp.com/accesscustom/niss350z.htm
ive seen the pics of the blue one called sarona fenders too.
ive seen the pics of the blue one called sarona fenders too.
11-01-2006, 03:36 PM
#11
Registered User
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: New York
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sentry65
i've seen those shark fenders for sale on sites before, but never have I seen anyone with them on their car
they have a nice price, almost too good...
the vents are more similar to the design of the seibon vents - they sit up high
they have a nice price, almost too good...
the vents are more similar to the design of the seibon vents - they sit up high
Thread
Thread Starter
Forum
Replies
Last Post
NA&CH
Media Share
371
02-21-2017 08:04 AM
HaulinZ
North West
23
09-20-2009 02:19 PM