Rear bumper fold for single exit exhaust
#21
New Member
iTrader: (18)
Join Date: Dec 2005
Location: Beaumont, Texas
Posts: 5,668
Likes: 0
Received 0 Likes
on
0 Posts
It can be a pain, my suggestion, if you have a friend with a lift that owes you, nows the time to collect. The pumpkin does'nt have to come out but must be lowered a bit. The axles can stay attached though. Driveshaft is removed, theres a single nut on the back of the rear cover that comes off so the pumpkin can be moved forward enough to be lowered. Don't forget to remove the vent hose. New diff. comes with new vent pipe to be installed. Yes it is a ***** but the outcome is worth it. Sadly I installed the TS rear Diffuser which completely hides the diff. cover but in your case will look very good. The cover was only around $80.00 from Performance. GTspec will also look good. We'll be waiting on pics.
#22
Originally Posted by davidf
It can be a pain, my suggestion, if you have a friend with a lift that owes you, nows the time to collect. The pumpkin does'nt have to come out but must be lowered a bit. The axles can stay attached though. Driveshaft is removed, theres a single nut on the back of the rear cover that comes off so the pumpkin can be moved forward enough to be lowered. Don't forget to remove the vent hose. New diff. comes with new vent pipe to be installed. Yes it is a ***** but the outcome is worth it. Sadly I installed the TS rear Diffuser which completely hides the diff. cover but in your case will look very good. The cover was only around $80.00 from Performance. GTspec will also look good. We'll be waiting on pics.
#24
Shift_Dorifto
iTrader: (17)
Join Date: Jul 2004
Location: Plano/Frisco, TX
Posts: 3,375
Likes: 0
Received 0 Likes
on
0 Posts
What exhaust is that, it is really colorful unlike my JIC. I love the coloring, looks like one of those crazy amuse cans.
edit...ahhhh Agency Power....i looked through your threads and found out.
also, i have the fold too...i just put some double sided tape under there to hold it up. Been holding for about 3 months now with no signs of coming down.
SP Engineering plate frame gives away the fact that you must love supras, are they doing anything for the 350s. I love that RX-7 with the hks twin'd supra motor that they put toether a while back.
edit...ahhhh Agency Power....i looked through your threads and found out.
also, i have the fold too...i just put some double sided tape under there to hold it up. Been holding for about 3 months now with no signs of coming down.
SP Engineering plate frame gives away the fact that you must love supras, are they doing anything for the 350s. I love that RX-7 with the hks twin'd supra motor that they put toether a while back.
Last edited by kwiker; 12-27-2006 at 09:17 AM.
#27
Originally Posted by kwiker
What exhaust is that, it is really colorful unlike my JIC. I love the coloring, looks like one of those crazy amuse cans.
edit...ahhhh Agency Power....i looked through your threads and found out.
also, i have the fold too...i just put some double sided tape under there to hold it up. Been holding for about 3 months now with no signs of coming down.
SP Engineering plate frame gives away the fact that you must love supras, are they doing anything for the 350s. I love that RX-7 with the hks twin'd supra motor that they put toether a while back.
edit...ahhhh Agency Power....i looked through your threads and found out.
also, i have the fold too...i just put some double sided tape under there to hold it up. Been holding for about 3 months now with no signs of coming down.
SP Engineering plate frame gives away the fact that you must love supras, are they doing anything for the 350s. I love that RX-7 with the hks twin'd supra motor that they put toether a while back.
Yeah SP is a awesome shop, they have done a lot of crazy cars including the 2JZ powered rx7, tt lambos, and 2jz powered lexus's.
#28
National Z Club
iTrader: (9)
Join Date: Nov 2005
Location: H Town
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
Awesome! I just did this to mine and am in love with it! It makes it look like a kit is on the car. One suggestion though, take off that heat shield (unless you already did). It sticks out like a sore thumb!
Your dead on about the finned diff cover! Im all about it also!
Good mod!!
Your dead on about the finned diff cover! Im all about it also!
Good mod!!
#29
Originally Posted by Nowell
Awesome! I just did this to mine and am in love with it! It makes it look like a kit is on the car. One suggestion though, take off that heat shield (unless you already did). It sticks out like a sore thumb!
Your dead on about the finned diff cover! Im all about it also!
Good mod!!
Your dead on about the finned diff cover! Im all about it also!
Good mod!!
#35
Registered User
Join Date: Apr 2004
Location: 916 MAC-TOWN, CA
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Just did that mod today..one of my Z homie did it in like 2 minutes...I have the HKS Ti-dual exhaust and it look mean as hell now from the rear...you can now see the resonaters..I'll post up some pix's tomorrow too...
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
11-29-2015 03:58 PM