Window Tint Question
#1
New Member
Thread Starter
iTrader: (6)
Join Date: Nov 2006
Location: San Diego
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Wussup everyone... I just got my windows tinted at a shop and you know how when you close the door of your Z it moves a little bit up and down automatically. Well this caused my tint to peel and I will be re-doing it at the shop. Anybody else have this problem or any tips on how to prevent it from doing that? I was thinking about driving with my door halfway closed haha. Thanks.
#3
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Either just keep your window cracked for a day or two or you can tape down the rubber switch in the door jam. If you do, be extremely careful when you close the door, but it will shut fine. I know guys that have used that blue masking tape that is used in body shops, but I have never tried it.
#6
Registered User
iTrader: (1)
Join Date: Jan 2006
Location: Maryland
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I agree with DaveZ06!
Any tint shop should be able to deal with this. Many cars come with that bump down feature such as th convertible Benz's, porsche amoung many others.
I have a car audio shop in MD called Caton Radio ( www.catonradio.com ) and we also do vehicle window tinting.
If the installer has half of a brain and isn't lazy they should have no problem tinting without creating this problem.
On every car we do we tint 2 inches under the weather srtipping so the tint never gets the opportunity to peal. A lot of shops are too lazy to take that much care of a car. PM me if u have any questions so you can make sure your shop doesn't screw you again.
Good luck!
-Sein
Any tint shop should be able to deal with this. Many cars come with that bump down feature such as th convertible Benz's, porsche amoung many others.
I have a car audio shop in MD called Caton Radio ( www.catonradio.com ) and we also do vehicle window tinting.
If the installer has half of a brain and isn't lazy they should have no problem tinting without creating this problem.
On every car we do we tint 2 inches under the weather srtipping so the tint never gets the opportunity to peal. A lot of shops are too lazy to take that much care of a car. PM me if u have any questions so you can make sure your shop doesn't screw you again.
Good luck!
-Sein
Trending Topics
#9
Registered User
iTrader: (8)
Join Date: Nov 2005
Location: Boston
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I have a problem with my tint that I belive is related..
my tint keeps peeling in the lower forward corner under the mirror. I've had them tint it twice with the same results. if I pull the fuse that controls the window for a week or so i wonder if it would have time to cure.
what else is odd is he did tint about 1/2 inch past the door seal.
my tint keeps peeling in the lower forward corner under the mirror. I've had them tint it twice with the same results. if I pull the fuse that controls the window for a week or so i wonder if it would have time to cure.
what else is odd is he did tint about 1/2 inch past the door seal.
#10
Registered User
iTrader: (8)
Join Date: May 2005
Location: N/S JERSEY
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
That tinting shop is probably not a good 1, when i wanted to get mine done my tinting shop actually told me about the issue with the window going up and down a half inch, it totally slipped my mind.... The tinting guy told me its a long process for Z's and Gs becuz of it, so he has to "FORCE DRY" it....while the doors are open, but that taping the switch is an awesome idea.. thanks
#11
Registered User
iTrader: (1)
Join Date: Jan 2006
Location: Maryland
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
If tinting a Z is a "long process" for that installer then I'd hate to see how long it takes him to tint an excursion or any car with more windows.
So far I'd say the Z is one of the easiest cars to tint in my opinion. Not sure why so many people are having a problem with it.
And for future refrence you guys can tell your shops when they are re-doing your windows that they can just un-screw the phillips head screw holding the rubber door sensor on and the sensor will loose its groud...causing the window to go up. Once the tint is installed (if installed properly) the screw can be put back in place and the bump-down feature will not harm the tint.
Hope this helps
So far I'd say the Z is one of the easiest cars to tint in my opinion. Not sure why so many people are having a problem with it.
And for future refrence you guys can tell your shops when they are re-doing your windows that they can just un-screw the phillips head screw holding the rubber door sensor on and the sensor will loose its groud...causing the window to go up. Once the tint is installed (if installed properly) the screw can be put back in place and the bump-down feature will not harm the tint.
Hope this helps
#15
New Member
Thread Starter
iTrader: (6)
Join Date: Nov 2006
Location: San Diego
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by sluggo
IF you're in the San Diego area, there's a shop on Miramar called "Auto Salon". Ask for a guy named Mario. They do an awesome job and have lifetime warranties on their work.
#16
New Member
iTrader: (11)
Join Date: Mar 2006
Location: Baltimore
Posts: 2,656
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by SeinZ
And for future refrence you guys can tell your shops when they are re-doing your windows that they can just un-screw the phillips head screw holding the rubber door sensor on and the sensor will loose its groud...causing the window to go up. Once the tint is installed (if installed properly) the screw can be put back in place and the bump-down feature will not harm the tint.
Hope this helps
Hope this helps
I see your shop all the time and always thought it was some kind of radio station. Actually I may bring my maxima up to the shop to see if you can repair my indash dvd player.
#17
One Whacked Cat
iTrader: (1)
Join Date: Apr 2006
Location: Maryland
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by SeinZ
If tinting a Z is a "long process" for that installer then I'd hate to see how long it takes him to tint an excursion or any car with more windows.
So far I'd say the Z is one of the easiest cars to tint in my opinion. Not sure why so many people are having a problem with it.
And for future refrence you guys can tell your shops when they are re-doing your windows that they can just un-screw the phillips head screw holding the rubber door sensor on and the sensor will loose its groud...causing the window to go up. Once the tint is installed (if installed properly) the screw can be put back in place and the bump-down feature will not harm the tint.
Hope this helps
So far I'd say the Z is one of the easiest cars to tint in my opinion. Not sure why so many people are having a problem with it.
And for future refrence you guys can tell your shops when they are re-doing your windows that they can just un-screw the phillips head screw holding the rubber door sensor on and the sensor will loose its groud...causing the window to go up. Once the tint is installed (if installed properly) the screw can be put back in place and the bump-down feature will not harm the tint.
Hope this helps
#19
Registered User
Join Date: May 2006
Location: Orlando
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I got mine done recently and all you have to do to take care of this is to buy a bottle of silicone at home depot and apply it on the rubber surface that the window hits when slides up and down....probably only once a month..that's it.