Silent9o8

iTrader: (1)

Hey guys i was wondering if the front bottom bumper cover is neccssary for the car? I wanted to take it off but im not sure if its NEEDED or not. Its the black plastic thing if you guys dont know what im talking about ill get a picture haha thanks for your inputs in advance.

md350

Not needed. Its an underbody spoiler/diffuser, not a cover. Part of the factory Aero package.

JDMFairladyZ33

iTrader: (37)

I would keep it on. It keeps the bottom of the engine bay cleaner. Why are you wanting to loose it? heating issues?

md350

Oh..yeah...there's that "black plastic thing" too. Maybe a pic would be good, lol. The large black sheet of plastic around the wheels SHOULD be left on.

Barzten1

iTrader: (18)

Id leave them both on for aerodynamics and keeping the air filer clean

myZter

iTrader: (7)

+1 on keeping under the car clean and smoother air flow. if it wasnt needed i dont think they would spend money on it.

Silent9o8

iTrader: (1)

well basically its hanging and it flips against the road when i drive so u see my car DRAG and people look over lol so just roll up my windows and blast my music it dragged so much it melted alot of plastic off so it aint holding anymore just hanging around so iwas thinking just to take it off..

http://www.courtesyparts.com/betasit...5_824_827.html

thats as close i can get to the part its basically in the middle that plastic thing where our oil filter is.. thanks

JDMFairladyZ33

iTrader: (37)

Instead of letting it drag why dont you fix it? The underlining cover and wheel well plastic pieces are so easy to take off and put back on. IMO you really need to keep them on.

davidv

iTrader: (2)

The proper name is the black plastic thingamajig.

Ruthless18x

iTrader: (59)

Ya know ARC makes a titanium replacement

md350

So...its missing a screw or two? Put them back in?

Silent9o8

iTrader: (1)

lol its totally melted it scraped against the concrete when iwas driving onthe 405 had no clue it was dragging cause it was so loud but ya either take it off or get a new one but im just wondering if its needed to spend 100 bucks on it

OffsetZ33

iTrader: (26)

its not titanium

OffsetZ33

iTrader: (26)

You should keep it on - not only does it keep the engine bay clean, it also does play a role in the airflow of the car. Mine was doing the same thing before I got another one - I had my busted up one all zip-tied to keep it on. Maybe look for a used one (I picked up a used one) to save a couple bucks.

Ruthless18x

iTrader: (59)

Then intensepower.com is f***** up.

OffsetZ33

iTrader: (26)

Yeah it is just aluminum. If it was really titanium then Id shell out the $500 for one. Well probably not because everytime Id scrape it Id just cringe

Silent9o8

iTrader: (1)

Lol Ya !! I Zip Tied It To Hahah And It Ripped Off And Drags Everywhere

Ruthless18x

iTrader: (59)

I know what ya mean. My plastic one is always scratched and covered in dirt.

Nismo#329

I also messed up my bottom bumper covers does anybody know if the aluminum cover will fit the nismo bumper?

KingBaby

iTrader: (3)

Yes the products from Z speed works and fit like a glove!