uninstalling the "Zignals"!!!! help!
12-16-2007, 04:52 PM
#1
Registered User
Thread Starter
iTrader: (5)
Join Date: Jun 2007
Location: Virginia
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
uninstalling the "Zignals"!!!! help!
When i purchased my 350z it came with the zignals and i dont mind so much how the turn signals light up a regular yellow color but when i have my lights on they glow RED... i cant stand the red light so i was wondering if anyone had some tips or write ups on how to un-install these zignals, thanks.
12-16-2007, 05:37 PM
#7
Registered User
iTrader: (109)
Join Date: Sep 2005
Location: Huntersville, NC
Posts: 2,153
Likes: 0
Received 0 Likes
on
0 Posts
You can remove the red from them and have the yellow on for the turn signals. Take your front wheel off then remove the plastic under the fender. You will see three wires leading to the headlight. Black one is ground the other two lead to the turn signal and running light. Just cut the running light one and you will have the red no more just yellow for turn signal.
Trending Topics
12-16-2007, 05:45 PM
#8
Registered User
iTrader: (4)
Join Date: Nov 2007
Location: DFW
Posts: 1,125
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by reptile718
You can remove the red from them and have the yellow on for the turn signals. Take your front wheel off then remove the plastic under the fender. You will see three wires leading to the headlight. Black one is ground the other two lead to the turn signal and running light. Just cut the running light one and you will have the red no more just yellow for turn signal.
great now i lost a good deal haha lol
-mo
12-18-2007, 02:53 PM
#11
Registered User
Thread Starter
iTrader: (5)
Join Date: Jun 2007
Location: Virginia
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
ill try to find pics, but does anybody know which color wire the running lights are and which color wire is for the turn signals?? because i could just pop the emblems out off the side and cut the running light wire that is attached to the back of the emblem... right now the colors i see that are attached to the zignals are the ground, and yellow and green... thanks everyone i appreciate any help...
12-19-2007, 12:50 PM
#13
Registered User
Join Date: Jul 2007
Location: chicago
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
how good are you with wiring and do you have a volt meter?
turn your lights on, which would produce the red running light. touch a wire with one prong and the ground with the other. I imagine one wire will show 12v and the other being the turn signals will show zero volts. then cut the 12 v
turn your lights on, which would produce the red running light. touch a wire with one prong and the ground with the other. I imagine one wire will show 12v and the other being the turn signals will show zero volts. then cut the 12 v
12-21-2007, 12:42 PM
#14
Registered User
Thread Starter
iTrader: (5)
Join Date: Jun 2007
Location: Virginia
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
alright everyone i tested the wires and the wire that makes it glow red was the yellow wire so i cut the yellow and now they work great... thanks to everyone for helping out.
Thread
Thread Starter
Forum
Replies
Last Post
