Replacing rear / front emblems
#1
New Member
Thread Starter
Replacing rear / front emblems
Has anyone replaced the front and rear emblems on a Z?
I am interested in replacing the "NISSAN" logo with a simpler "Z" in a circle logo.
Is there a Z logo badge that is the correct size for those spots? Where can I get them?
Anyone got a picture of this already done?
Thanks in advance.
I am interested in replacing the "NISSAN" logo with a simpler "Z" in a circle logo.
Is there a Z logo badge that is the correct size for those spots? Where can I get them?
Anyone got a picture of this already done?
Thanks in advance.
#3
New Member
Thread Starter
Details...
Originally posted by wren57
They have them at courtesyparts.com. You can buy them in a pair. If you only want to use one, I will buy the second from you, as I am looking to buy just one as well. Thanks.
They have them at courtesyparts.com. You can buy them in a pair. If you only want to use one, I will buy the second from you, as I am looking to buy just one as well. Thanks.
Also, will the new ones at courtesy completely cover the same area (in case the paint is damaged during removal?)
Just curious.
I won't be getting em too soon since my Z isn't due to October, but I already have about $400 of accessories in my basement or on order. 8*) (Quick Shifter, seatback organizer, front plate relocation bracket, etc.)
#4
I have replaced the front Nissan emblem with the Z emblem from courtsey. Under the front emblem there are 3 pronges that will help you align the Z emblem. To remove the current Nissan badge you can use a hair dryer using (warm air to hot air) to remove the emblem. You are heating up the adhesive under the bottem of the Nissan emblem. And it will allow you to remove it.
Once you remove it you need to clean the area with adhesive remover to make sure it is clean before puting on the new Z emblem.
The rear emblem I havent done. I am still trying to determine if there are 3 pronges under the emblem that will allow you to align it. Some say there is. Some say there isnt and you have to manually center it.
Once you remove it you need to clean the area with adhesive remover to make sure it is clean before puting on the new Z emblem.
The rear emblem I havent done. I am still trying to determine if there are 3 pronges under the emblem that will allow you to align it. Some say there is. Some say there isnt and you have to manually center it.
#8
New Member
Join Date: Jun 2003
Location: Modesto California
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 3rdpower
I removed the chunky rear Nissan badge and put on a custom panted Z circle that matches my leman's sunset... it look beautiful
I removed the chunky rear Nissan badge and put on a custom panted Z circle that matches my leman's sunset... it look beautiful
Thread
Thread Starter
Forum
Replies
Last Post
bcoffee20
Zs & Gs For Sale
5
11-19-2015 06:39 PM
seagrasser
Zs & Gs For Sale
6
10-11-2015 03:27 PM
hardkicks
Zs & Gs For Sale
0
09-20-2015 12:28 PM