anyone have any roll cages pics
#1
Registered User
Thread Starter
Join Date: Jun 2009
Location: thousand oaks california
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
anyone have any roll cages pics
im considering striping out the back end and installing roll cage im not going for anything extreme but i do want something practical for a weekend track car
any pics would be awesome thanks
any pics would be awesome thanks
#2
Administrator
iTrader: (25)
Moved...
Trending Topics
#8
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
#9
Registered User
Join Date: Feb 2009
Location: Germany
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
CarDiff is a german company that is specialized for rollbars for different racing series. For example. they run 2 hondas at the 24h race at the "green hell"
The harnesses are 3" Schroth 6point harnesses that work very good with the cardiff cage. i think the harnesses are even to long. You won´t have any problems attaching harnesses to that cage.
The harnesses are 3" Schroth 6point harnesses that work very good with the cardiff cage. i think the harnesses are even to long. You won´t have any problems attaching harnesses to that cage.
#17
350Z-holic
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
There i no need for a full cage unless you are actually putting the car to the track........and when it comes to a full cage, i say custom or go home! rick doggs cage was obviously nicely fabricated...
Rickdogg:
how did you connect your takata's harnesses........did you end up welding or mounting studs to clip to? or did you wrap around the horizontal cross brace bar?
-J
#18
350Z-holic
iTrader: (46)
My only issue with this Kirk is that the cross-brace for the harnesses is on the upper end of being too low. Handling my OCD, I bumped each side up about an inch with some fabrication. Beefy bolts and washers on the driver's side, and a 6" x 6" x 1/2" TZM plate on the passenger side (neither shown in this pic).
Last edited by scotts300; 01-06-2010 at 07:46 AM.