350zUSNavy

Does anyone know where i can get the Iron man headlights for my 06 z

silverbullet_Z

iTrader: (3)

You have to be Tony Stark in order to afford them I would also like to know.

Delta_two-Niner

Subscribe to Zleds on facebook....they Specialize in this work...Including but not limited to 350z modifications, reflector upgrades, and much more.

I hope they're ok with posting this info... if interested their email is:
zleds.sales@gmail.com
Hope this helps!!

Guilty1s

iTrader: (12)

you get a pair of these: http://www.theretrofitsource.com/pro...roducts_id=103

Put the CCFLs around your projector behind the shroud. Then you just sand the thin layer of paint of the 4 concers of the projector shroud.

Use some gluedots to mount the invertor inside, wire into parking lights. Reseal, done.

They have since come out with LED rings that dont need invertors now which would make it easier, but i cant contest to thier quality. The retrofitsources ones were ok Quality. They are good, just fragile.Really not much way around it.

R350Zz33

iTrader: (4)

s&A did mine
sacustoms12@yahoo.com
they have cheaper priceing then the other vendors on here and they are a vendor tell sam rich sent u

SirSpeedyZ

iTrader: (10)

There are several DIYs here for that mod

User 42426

iTrader: (29)

If you do it yourself you it will cost less than 100 bucks for everything, prob around 70-80

Delta_two-Niner

yeah if you DIY....it can be done for cheap..but remember that with amateur work you get amateur results.....i did an fx-r retro in my 350z and had to have a custom shroud made by a local company...that company COMPLETELY flubbed it up so now im stuck with a retro i wanted to turn out a little differently.

Waiz

iTrader: (57)

We also have two DIY's to reference

https://my350z.com/forum/body-interi...eadlights.html

https://my350z.com/forum/body-interi...hting-diy-460/