ISO source for underbody plastics
The girlfriends 350Z needs new front wheel well liners and the plastic part that goes under the front of the car from the bumper back. Can anyone recommend a source?
Thanks,
Jeff
Thanks,
Jeff
passenger fender liner and undershroud can be bought here
http://www.slidegood.com/nissan/350z
or courtesyparts.com actually has them cheaper
https://www.courtesyparts.com/?p=cat...fender%20liner
but i would suggest the zspeed undershroud
http://www.zspeedperformance.com/ZSp...SP2002-Z33.htm
http://www.slidegood.com/nissan/350z
or courtesyparts.com actually has them cheaper
https://www.courtesyparts.com/?p=cat...fender%20liner
but i would suggest the zspeed undershroud
http://www.zspeedperformance.com/ZSp...SP2002-Z33.htm
After getting side tracked, I am finally back on this project. The Z-speed stuff looks nice, and doesn't cost much more than the plastic stuff. Thanks for pointing me that way.
Browsing the Z-speed page, it looks like I will also need the Bumper Font Extension Panel Is this correct?
I would like to get the replacement done in one session. Are there any other little brackets or bits I will need (other than the obvious screws/bolts around the perimeter of the panels)?
Once i get these into place I'll move on to the fender liners.
Thanks,
Jeff
Browsing the Z-speed page, it looks like I will also need the Bumper Font Extension Panel Is this correct?
I would like to get the replacement done in one session. Are there any other little brackets or bits I will need (other than the obvious screws/bolts around the perimeter of the panels)?
Once i get these into place I'll move on to the fender liners.
Thanks,
Jeff
Joined: May 2002
Posts: 8,625
Likes: 1,394
From: Aurora, Colorado
Unless your girl owns a 07-08 350Z NISMO model (with V3 bumper extensions), there's no need to buy the extension panel. And the fender liners are integrated into the bottom tray, so you'd be better off doing them together.
Trending Topics
She does not have the 07-08 NISMO, just a stock 04 or 05 350Z. With the money saved by not getting the extension, I can also get the fender liners.
It looks like each liner is a two piece unit.
I agree but after getting ripped by Z1 for over $100 after shipping for one liner on my last carI was willing to take my chances
Last edited by vegasanthony; May 7, 2018 at 10:29 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Silver_Z33
Intake Exhaust
15
Nov 18, 2008 05:44 AM
sifuK
Cleaning & Detailing
2
Sep 16, 2003 06:17 PM









