I need help with my manual mode settings. Does anyone know what I should enter to get it at stock boost or near stock boost. I have been getting spikes on auto mode and would like to try using manual mode.

 

Put SET=0 that is stock boost.

If you still get a small spike lower the GAIN number but keep the SET at 0.

Also set you START at 3 or less.

Then record a runn and see if boost holds steady, if not then you have to play with the RPM Offset numbers.

 

Boost controllers are very poor at getting stock or near stock boost levels. They arent designed to really do that.

Just turn it to the off position. You should have pretty steady boost with just the wastegates...as long as the lines are installed correctly.