HELP with turbonetics kit!!!!!!!!!!!!!!!!!!!!
#1
Registered User
Thread Starter
iTrader: (6)
Join Date: Aug 2005
Location: PHOENIX
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
i have an 04 350 with the turbonetics kit. i am setting codes and have tried everything that i can think of to fix the issue. the codes that i am setting are p1031,p1051,p1148,p1168. here is my question, who has an 04 350 running the turbonetics kit with the 6 pin harness for the top 02 sensors instead of the 4 pin harness. when you did the install did you set any codes.
i have even sent the ecu back to turbonetics to redo the reflash, and still have this issue.
please help.
i have even sent the ecu back to turbonetics to redo the reflash, and still have this issue.
please help.
#5
Registered User
Thread Starter
iTrader: (6)
Join Date: Aug 2005
Location: PHOENIX
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by MIAPLAYA
6 pin for the top O2 sensor? Are you sure its an 04? Sounds like an 05 with the wideband front sensor..
on the door it shows that the car was built in 1/04, but my senors are not the same as Darren at Intense Motorsports who has a 03. he has the 4 pin sensor and is not having any issues. the 6 pin sensor has 02's and A/F readers in them, were the 4 pin is just for 02's.
#6
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by bverschage
on the door it shows that the car was built in 1/04, but my senors are not the same as Darren at Intense Motorsports who has a 03. he has the 4 pin sensor and is not having any issues. the 6 pin sensor has 02's and A/F readers in them, were the 4 pin is just for 02's.
#7
Registered User
Thread Starter
iTrader: (6)
Join Date: Aug 2005
Location: PHOENIX
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
not sure which ecu revision that i have. i called a nissan dealer here in phoenix, and they said that with some of the VQ's that when you unplug the ecu and plug it back in it does not read the sensors after that. they have to down load a new ecu map and reflash the ecu. this will wipe the reflash that was done by turbonetis, so that will have to be redone. they said that they have seen this a few times but i does not happen with all the ecu's. i must have just been the first lucky one with the turbo kit. i will let Reggie know at turbonetics that they may start to see more of this as people install more of these kits. the thing that sucks is that you can not tell before turbonetics does the reflash. hopefully this will fix the issue and i can start to enjoy my turbo that i installed 3 weeks ago.
Trending Topics
#8
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by bverschage
not sure which ecu revision that i have. i called a nissan dealer here in phoenix, and they said that with some of the VQ's that when you unplug the ecu and plug it back in it does not read the sensors after that. they have to down load a new ecu map and reflash the ecu. this will wipe the reflash that was done by turbonetis, so that will have to be redone. they said that they have seen this a few times but i does not happen with all the ecu's. i must have just been the first lucky one with the turbo kit. i will let Reggie know at turbonetics that they may start to see more of this as people install more of these kits. the thing that sucks is that you can not tell before turbonetics does the reflash. hopefully this will fix the issue and i can start to enjoy my turbo that i installed 3 weeks ago.
#10
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by bverschage
why would you not have them do the reflash back to stock. they said that i could leave the car at the shop while the ecu is sent back to turbonetics.
#12
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by bverschage
no the dealer is cool with me leaving the car there for 3 days till i get the ecu back from turbonetics.
#13
Registered User
Thread Starter
iTrader: (6)
Join Date: Aug 2005
Location: PHOENIX
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
other than the codes the car runs great, and ideals like a dream. i have not really got on the car yet because of the codes, but i can not wait. hopefully this will fix the issue and i can start to enjoy my turbo 350z.
#14
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by bverschage
other than the codes the car runs great, and ideals like a dream. i have not really got on the car yet because of the codes, but i can not wait. hopefully this will fix the issue and i can start to enjoy my turbo 350z.
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
#18
Registered User
Thread Starter
iTrader: (6)
Join Date: Aug 2005
Location: PHOENIX
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by bverschage
i have an 04 350 with the turbonetics kit. i am setting codes and have tried everything that i can think of to fix the issue. the codes that i am setting are p1031,p1051,p1148,p1168. here is my question, who has an 04 350 running the turbonetics kit with the 6 pin harness for the top 02 sensors instead of the 4 pin harness. when you did the install did you set any codes.
i have even sent the ecu back to turbonetics to redo the reflash, and still have this issue.
please help.
i have even sent the ecu back to turbonetics to redo the reflash, and still have this issue.
please help.
ok i found out what was setting these codes, the fuse for the o2 sensors was blown.
now i am setting 3 new codes
p1273
p1284
these are A/F sensor bank 1 and bank 2
from what i have read i do not need to worry about these, is that true?
the last code is p0300
random missfire, from what i have read thie is also a code that i do not have to worry about.
are these codes that every one else sets? if so how often do you set these codes?
#19
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by bverschage
not sure which ecu revision that i have. i called a nissan dealer here in phoenix, and they said that with some of the VQ's that when you unplug the ecu and plug it back in it does not read the sensors after that. they have to down load a new ecu map and reflash the ecu. this will wipe the reflash that was done by turbonetis, so that will have to be redone. they said that they have seen this a few times but i does not happen with all the ecu's.
#20
![](https://my350z.com/forum/images/ranks/premier.gif)
iTrader: (2)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by bverschage
ok i found out what was setting these codes, the fuse for the o2 sensors was blown.
now i am setting 3 new codes
p1273
p1284
these are A/F sensor bank 1 and bank 2
from what i have read i do not need to worry about these, is that true?
the last code is p0300
random missfire, from what i have read thie is also a code that i do not have to worry about.
are these codes that every one else sets? if so how often do you set these codes?
now i am setting 3 new codes
p1273
p1284
these are A/F sensor bank 1 and bank 2
from what i have read i do not need to worry about these, is that true?
the last code is p0300
random missfire, from what i have read thie is also a code that i do not have to worry about.
are these codes that every one else sets? if so how often do you set these codes?