Notices
Forced Induction Turbochargers and Superchargers..Got Boost?

Need a list of all 350z's over 400whp on stock internals!!!

Thread Tools
 
Search this Thread
 
Old Jul 7, 2013 | 01:51 PM
  #61  
unvmyg35's Avatar
unvmyg35
Registered User
iTrader: (15)
 
Joined: Sep 2011
Posts: 467
Likes: 1
From: San Mateo County
Default

1. Roncfpz Greddy TT 401whp @ 8psi
2. BigBri APSTT 551whp 493wtq @ 15psi
3. Barthelb APSTT 462whp 445wtq @ 9.5psi
4. BamBam Greddy TT 425whp @ 9.5 psi
5. BriGuyMax APS TT 460whp @ 10psi
6. Peking Turbonetics ST 402 @ 9.5psi
7. Nitrouz APS TT 440rwhp / 418rwtq @ 8.5psi
8. D350Z Turbonetics ST 440rwhp/ 450rwtq @ 9.5 psi
9. Yancy Greddy TT 446rwhp/424rwtq @ 8.5psi
10. 002-M-P Greddy TT 424whp/392wtq @ 7.5psi
11. mcduck Vortech SC 451rwhp/368rwtq @ 9psi
12. BoOstEdz33TT Greddy 453hp/429wt@8.5psi 426hp/416@7.5psi
13. Backagain - Vortech w/3.12 pulley 400whp/342wtq@7.9 ps
14. mcderns-Greddy TT 450whp/428wtq @ 8.5-9psi
15. Vortec27 - -Vortech v2 3:12 pully 443 bhp @ the wheels 9.5psi
16. Psychoballistic- Greddy TT 430whp/ 390 wtq @ 8psi
17. OldManZ (TimRod) Vortech, 540whp/436wtq @ 16psi
18. Pete5150 - VSR Motorsports ST, 464whp @ 7psi
19. meanz- Vortech, 436/390 @11psi
20. NismoK - GTM TT 416/398 @ 9psi
21. unvmyg - Vortech SI Trim, 454/389 @ 11psi---15K boosted, ZCarGarage
22. k6750gsxr-GTM TT GT30's 450/440@10psi
23. P&K350Z- Vortech 2.87, 458/393 @ 11psi
24. nism350 momentum single 409/355 @ 9.5 psi
25. Ztouring04- greddy TT 422/407 @ 8.7psi
26. Wizard - Vortech, 450whp/400wtq @ 13psi
Reply
Old Jul 7, 2013 | 05:41 PM
  #62  
OldManZ350's Avatar
OldManZ350
New Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (23)
 
Joined: Nov 2003
Posts: 2,429
Likes: 230
From: Florida
Default

1. Roncfpz Greddy TT 401whp @ 8psi
2. BigBri APSTT 551whp 493wtq @ 15psi
3. Barthelb APSTT 462whp 445wtq @ 9.5psi
4. BamBam Greddy TT 425whp @ 9.5 psi
5. BriGuyMax APS TT 460whp @ 10psi
6. Peking Turbonetics ST 402 @ 9.5psi
7. Nitrouz APS TT 440rwhp / 418rwtq @ 8.5psi
8. D350Z Turbonetics ST 440rwhp/ 450rwtq @ 9.5 psi
9. Yancy Greddy TT 446rwhp/424rwtq @ 8.5psi
10. 002-M-P Greddy TT 424whp/392wtq @ 7.5psi
11. mcduck Vortech SC 451rwhp/368rwtq @ 9psi
12. BoOstEdz33TT Greddy 453hp/429wt@8.5psi 426hp/416@7.5psi
13. Backagain - Vortech w/3.12 pulley 400whp/342wtq@7.9 ps
14. mcderns-Greddy TT 450whp/428wtq @ 8.5-9psi
15. Vortec27 - -Vortech v2 3:12 pully 443 bhp @ the wheels 9.5psi
16. Psychoballistic- Greddy TT 430whp/ 390 wtq @ 8psi
17. OldManZ (TimRod) VQ35DE, Vortech, 540whp/436wtq @ 16-17psi, 108 Octane, 42,000 miles SC'ed, Tuned by TimRod's Garage
18. Pete5150 - VSR Motorsports ST, 464whp @ 7psi
19. meanz- Vortech, 436/390 @11psi
20. NismoK - GTM TT 416/398 @ 9psi
21. unvmyg - Vortech SI Trim, 454/389 @ 11psi---15K boosted, ZCarGarage
22. k6750gsxr-GTM TT GT30's 450/440@10psi
23. P&K350Z- Vortech 2.87, 458/393 @ 11psi
24. nism350 momentum single 409/355 @ 9.5 psi
25. Ztouring04- greddy TT 422/407 @ 8.7psi
26. Wizard - Vortech, 450whp/400wtq @ 13psi

Last edited by OldManZ350; Jul 8, 2013 at 06:55 AM.
Reply
Old Jul 7, 2013 | 06:28 PM
  #63  
taywan's Avatar
taywan
Registered User
iTrader: (53)
 
Joined: Mar 2011
Posts: 4,734
Likes: 4
From: G'ville SC
Default

OldmanZ ---- wtf.......540 on stock block?? That's insane.
Reply
Old Jul 8, 2013 | 05:38 AM
  #64  
wizard's Avatar
wizard
New Member
 
Joined: Apr 2009
Posts: 270
Likes: 3
From: UK
Default

It would be better still to know if these motor's are the 'DE series or 'HR.
Reply
Old Jul 8, 2013 | 08:53 AM
  #65  
midz350's Avatar
midz350
New Member
iTrader: (4)
 
Joined: Aug 2007
Posts: 4,054
Likes: 24
From: around.
Default

Originally Posted by Cass007
THIS

Also doesn't account for shops doing hero pulls and then backing it down before you get the car for "safety".
+1

What's up old friend?
Reply
Old Jul 8, 2013 | 10:04 AM
  #66  
OldManZ350's Avatar
OldManZ350
New Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (23)
 
Joined: Nov 2003
Posts: 2,429
Likes: 230
From: Florida
Default

Well, In My Case, My Car's Numbers are a Race Tune that I use at The Drag Strip......I don't have a Dyno Queen, and don't care about Dyno Numbers as it's just a Tool. Putting your Car on a Dyno for anything other than for Tuning is for Kids. But racing at the Strip is Win or Loose and if you can't get your car down the Strip Quick, all the HP in the World dose not mean much.


Originally Posted by Cass007
THIS

Also doesn't account for shops doing hero pulls and then backing it down before you get the car for "safety".

Last edited by OldManZ350; Jul 8, 2013 at 10:07 AM.
Reply
Old Aug 6, 2013 | 04:57 AM
  #67  
Nismo350z#0310's Avatar
Nismo350z#0310
New Member
iTrader: (1)
 
Joined: May 2012
Posts: 14,565
Likes: 562
From: The Piedmont
Default

Originally Posted by taywan
OldmanZ ---- wtf.......540 on stock block?? That's insane.
If it's a HR , I've been told by a few shops 540whp is the max "safe" point, although I wouldn't push it that far.
Reply
Old Aug 6, 2013 | 05:06 AM
  #68  
Nismo350z#0310's Avatar
Nismo350z#0310
New Member
iTrader: (1)
 
Joined: May 2012
Posts: 14,565
Likes: 562
From: The Piedmont
Default

Also, my setup:

GTM Stage II TT 503whp 407wtq @ 9.5 psi

Tuned by TopSpeed Motorsports
Reply
Old Aug 6, 2013 | 06:57 AM
  #69  
ksuberk54's Avatar
ksuberk54
New Member
iTrader: (2)
 
Joined: Jul 2011
Posts: 1,122
Likes: 3
From: Not here
Default

Nismo, when do you plan on taking that beast to the drag strip? I'm thinking you should be able to get into the 11s easy.
Reply
Old Aug 6, 2013 | 07:13 AM
  #70  
Nismo350z#0310's Avatar
Nismo350z#0310
New Member
iTrader: (1)
 
Joined: May 2012
Posts: 14,565
Likes: 562
From: The Piedmont
Default

Originally Posted by ksuberk54
Nismo, when do you plan on taking that beast to the drag strip? I'm thinking you should be able to get into the 11s easy.
No 11s due to traction. I will need a 10.5 - 11 inch rim with at least 295 preferably 305 drag radials. Problem is my tune goes from no power to too much power. I'm still learning to drive it. I will hit up the local strip here soon with a few freinds, gf's brother has an awesome 25th Anny '04 Cobra with 548whp and another friend just got a 650whp / 750whp w/ NOS '03 Cobra. Also, a mutual frind might bring his 486whp '03 Cobra as well.

LMAO rolling with 3 Cobras.

Hopefully sometime this month. It'll be brutal unless I get wider stickier tires though. Maybe Mid 12s.
Reply
Old Aug 6, 2013 | 07:24 AM
  #71  
djamps's Avatar
djamps
Registered User
iTrader: (1)
 
Joined: Dec 2008
Posts: 4,492
Likes: 10
From: MD
Default

No traction issues with my MT ET streets bias ply's (11" of tread on 8" of wheel). Plus they are easy on the axles, I can pretty much drop the clutch and they give just enough. DR's are way less forgiving on your drivetrain..I (as well as MT) only recommend DR's with auto trans.

Last edited by djamps; Aug 6, 2013 at 07:28 AM.
Reply
Old Aug 6, 2013 | 08:20 PM
  #72  
Nismo350z#0310's Avatar
Nismo350z#0310
New Member
iTrader: (1)
 
Joined: May 2012
Posts: 14,565
Likes: 562
From: The Piedmont
Default

Originally Posted by djamps
No traction issues with my MT ET streets bias ply's (11" of tread on 8" of wheel). Plus they are easy on the axles, I can pretty much drop the clutch and they give just enough. DR's are way less forgiving on your drivetrain..I (as well as MT) only recommend DR's with auto trans.
Well those are basically race slicks, I do enjoy street driving occasionally. I'm trying to find a setup that's more or less turn key for street/track/drag. Also I do have over 500whp, not sure how that'going to compare to your tire setup. That was just on 4th gear dyno pulls to go easier on the engine due to really high shop temps at the time. If it were 5th gear with the 1:1 ratio I was told it may be closer to 520whp. Again, a lot of it seems like my tune. It doesn't ease into power its just like nothing and then everything.

Last edited by Nismo350z#0310; Aug 6, 2013 at 08:21 PM.
Reply
Old Aug 7, 2013 | 03:21 AM
  #73  
DR Z's Avatar
DR Z
New Member
 
Joined: Jan 2011
Posts: 38
Likes: 0
From: ITA
Default

1. Roncfpz Greddy TT 401whp @ 8psi
2. BigBri APSTT 551whp 493wtq @ 15psi
3. Barthelb APSTT 462whp 445wtq @ 9.5psi
4. BamBam Greddy TT 425whp @ 9.5 psi
5. BriGuyMax APS TT 460whp @ 10psi
6. Peking Turbonetics ST 402 @ 9.5psi
7. Nitrouz APS TT 440rwhp / 418rwtq @ 8.5psi
8. D350Z Turbonetics ST 440rwhp/ 450rwtq @ 9.5 psi
9. Yancy Greddy TT 446rwhp/424rwtq @ 8.5psi
10. 002-M-P Greddy TT 424whp/392wtq @ 7.5psi
11. mcduck Vortech SC 451rwhp/368rwtq @ 9psi
12. BoOstEdz33TT Greddy 453hp/429wt@8.5psi 426hp/416@7.5psi
13. Backagain - Vortech w/3.12 pulley 400whp/342wtq@7.9 ps
14. mcderns-Greddy TT 450whp/428wtq @ 8.5-9psi
15. Vortec27 - -Vortech v2 3:12 pully 443 bhp @ the wheels 9.5psi
16. Psychoballistic- Greddy TT 430whp/ 390 wtq @ 8psi
17. OldManZ (TimRod) VQ35DE, Vortech, 540whp/436wtq @ 16-17psi, 108 Octane, 42,000 miles SC'ed, Tuned by TimRod's Garage
18. Pete5150 - VSR Motorsports ST, 464whp @ 7psi
19. meanz- Vortech, 436/390 @11psi
20. NismoK - GTM TT 416/398 @ 9psi
21. unvmyg - Vortech SI Trim, 454/389 @ 11psi---15K boosted, ZCarGarage
22. k6750gsxr-GTM TT GT30's 450/440@10psi
23. P&K350Z- Vortech 2.87, 458/393 @ 11psi
24. nism350 momentum single 409/355 @ 9.5 psi
25. Ztouring04- greddy TT 422/407 @ 8.7psi
26. Wizard - Vortech, 450whp/400wtq @ 13psi
27. Dr z - gtm sc 1.0, 450cv/45kg @ 9 psi
Reply
Old Aug 7, 2013 | 05:17 AM
  #74  
djamps's Avatar
djamps
Registered User
iTrader: (1)
 
Joined: Dec 2008
Posts: 4,492
Likes: 10
From: MD
Default

Originally Posted by Nismo350z#0310
Well those are basically race slicks, I do enjoy street driving occasionally. I'm trying to find a setup that's more or less turn key for street/track/drag. Also I do have over 500whp, not sure how that'going to compare to your tire setup. That was just on 4th gear dyno pulls to go easier on the engine due to really high shop temps at the time. If it were 5th gear with the 1:1 ratio I was told it may be closer to 520whp. Again, a lot of it seems like my tune. It doesn't ease into power its just like nothing and then everything.
DR's may have 'enough' traction for both street and strip, but they are the wrong tire for the strip on a 6mt even with stage 5 axles. With your level of HP on DR's you're most likely going to break axles before you make a good 60ft.

Last edited by djamps; Aug 7, 2013 at 05:23 AM.
Reply
Old Aug 7, 2013 | 08:52 AM
  #75  
Nismo350z#0310's Avatar
Nismo350z#0310
New Member
iTrader: (1)
 
Joined: May 2012
Posts: 14,565
Likes: 562
From: The Piedmont
Default

Originally Posted by djamps
DR's may have 'enough' traction for both street and strip, but they are the wrong tire for the strip on a 6mt even with stage 5 axles. With your level of HP on DR's you're most likely going to break axles before you make a good 60ft.
I could always pussyfoot it.
Reply
Old Aug 7, 2013 | 09:13 AM
  #76  
djamps's Avatar
djamps
Registered User
iTrader: (1)
 
Joined: Dec 2008
Posts: 4,492
Likes: 10
From: MD
Default

^^ that's great as long as you don't mind poopy times
Reply
Old Aug 7, 2013 | 10:05 AM
  #77  
Nismo350z#0310's Avatar
Nismo350z#0310
New Member
iTrader: (1)
 
Joined: May 2012
Posts: 14,565
Likes: 562
From: The Piedmont
Default

1. Roncfpz Greddy TT 401whp @ 8psi
2. BigBri APSTT 551whp 493wtq @ 15psi
3. Barthelb APSTT 462whp 445wtq @ 9.5psi
4. BamBam Greddy TT 425whp @ 9.5 psi
5. BriGuyMax APS TT 460whp @ 10psi
6. Peking Turbonetics ST 402 @ 9.5psi
7. Nitrouz APS TT 440rwhp / 418rwtq @ 8.5psi
8. D350Z Turbonetics ST 440rwhp/ 450rwtq @ 9.5 psi
9. Yancy Greddy TT 446rwhp/424rwtq @ 8.5psi
10. 002-M-P Greddy TT 424whp/392wtq @ 7.5psi
11. mcduck Vortech SC 451rwhp/368rwtq @ 9psi
12. BoOstEdz33TT Greddy 453hp/429wt@8.5psi 426hp/416@7.5psi
13. Backagain - Vortech w/3.12 pulley 400whp/342wtq@7.9 ps
14. mcderns-Greddy TT 450whp/428wtq @ 8.5-9psi
15. Vortec27 - -Vortech v2 3:12 pully 443 bhp @ the wheels 9.5psi
16. Psychoballistic- Greddy TT 430whp/ 390 wtq @ 8psi
17. OldManZ (TimRod) VQ35DE, Vortech, 540whp/436wtq @ 16-17psi, 108 Octane, 42,000 miles SC'ed, Tuned by TimRod's Garage
18. Pete5150 - VSR Motorsports ST, 464whp @ 7psi
19. meanz- Vortech, 436/390 @11psi
20. NismoK - GTM TT 416/398 @ 9psi
21. unvmyg - Vortech SI Trim, 454/389 @ 11psi---15K boosted, ZCarGarage
22. k6750gsxr-GTM TT GT30's 450/440@10psi
23. P&K350Z- Vortech 2.87, 458/393 @ 11psi
24. nism350 momentum single 409/355 @ 9.5 psi
25. Ztouring04- greddy TT 422/407 @ 8.7psi
26. Wizard - Vortech, 450whp/400wtq @ 13psi
27. Dr z - gtm sc 1.0, 450cv/45kg @ 9 ps
28. Nismo350z#0310 - GTM Stage 2 TT - 503whp / 407wtq @ 9.5 psi , 93 Octane - TopSpeed Motosports
Reply
Old Aug 8, 2013 | 04:50 PM
  #78  
jdepe's Avatar
jdepe
New Member
iTrader: (8)
 
Joined: Mar 2007
Posts: 201
Likes: 0
From: Murfreesboro,TN
Default

Jdepe BP kit 494whp/444tq @10 psi
Reply
Old Aug 16, 2013 | 06:51 PM
  #79  
cantstopspinnin's Avatar
cantstopspinnin
Registered User
 
Joined: Jun 2010
Posts: 6
Likes: 0
From: Edmonton
Default

456rwhp 416tq for 2 very hard seasons 40,xxx KM before spun bearing
Reply
Old Aug 19, 2013 | 05:07 PM
  #80  
jr27's Avatar
jr27
Registered User
 
Joined: Apr 2011
Posts: 50
Likes: 0
From: SO CAL
Default

old thread but why not...

1. Roncfpz Greddy TT 401whp @ 8psi
2. BigBri APSTT 551whp 493wtq @ 15psi
3. Barthelb APSTT 462whp 445wtq @ 9.5psi
4. BamBam Greddy TT 425whp @ 9.5 psi
5. BriGuyMax APS TT 460whp @ 10psi
6. Peking Turbonetics ST 402 @ 9.5psi
7. Nitrouz APS TT 440rwhp / 418rwtq @ 8.5psi
8. D350Z Turbonetics ST 440rwhp/ 450rwtq @ 9.5 psi
9. Yancy Greddy TT 446rwhp/424rwtq @ 8.5psi
10. 002-M-P Greddy TT 424whp/392wtq @ 7.5psi
11. mcduck Vortech SC 451rwhp/368rwtq @ 9psi
12. BoOstEdz33TT Greddy 453hp/429wt@8.5psi 426hp/416@7.5psi
13. Backagain - Vortech w/3.12 pulley 400whp/342wtq@7.9 ps
14. mcderns-Greddy TT 450whp/428wtq @ 8.5-9psi
15. Vortec27 - -Vortech v2 3:12 pully 443 bhp @ the wheels 9.5psi
16. Psychoballistic- Greddy TT 430whp/ 390 wtq @ 8psi
17. OldManZ (TimRod) VQ35DE, Vortech, 540whp/436wtq @ 16-17psi, 108 Octane, 42,000 miles SC'ed, Tuned by TimRod's Garage
18. Pete5150 - VSR Motorsports ST, 464whp @ 7psi
19. meanz- Vortech, 436/390 @11psi
20. NismoK - GTM TT 416/398 @ 9psi
21. unvmyg - Vortech SI Trim, 454/389 @ 11psi---15K boosted, ZCarGarage
22. k6750gsxr-GTM TT GT30's 450/440@10psi
23. P&K350Z- Vortech 2.87, 458/393 @ 11psi
24. nism350 momentum single 409/355 @ 9.5 psi
25. Ztouring04- greddy TT 422/407 @ 8.7psi
26. Wizard - Vortech, 450whp/400wtq @ 13psi
27. Dr z - gtm sc 1.0, 450cv/45kg @ 9 ps
28. Nismo350z#0310 - GTM Stage 2 TT - 503whp / 407wtq @ 9.5 psi , 93 Octane - TopSpeed Motosports
29. jr27 vortech v3 stock pulley tuned by church automotive 425whp/380wtq @7.5psi

Last edited by jr27; Aug 19, 2013 at 05:13 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bcoffee20
Zs & Gs For Sale
5
Nov 19, 2015 06:39 PM
Bodyboarder81
Forced Induction
13
Sep 21, 2015 06:23 AM
_koubie_
Engine & Drivetrain
5
Sep 20, 2015 06:34 PM
hardkicks
Zs & Gs For Sale
0
Sep 20, 2015 12:28 PM




All times are GMT -8. The time now is 09:34 PM.