Anyone know where I can buy an aftermarket Oil Line Feed for the vortech SC?
I also need to get the Air filter , and a new sleeve where it connects the tube to the intercooler..

does anyone know where I can buy any of this stuff?

Thanks for any help-

Mark

 

Why not just get all of that stuff from Vortech? Call their Customer Support and they should be able to hook you up.

 

Yup...give us a call..
805-247-0226 press 1 for sales.

-steve

 

emailed you Steve

 

Vortech direct or, go to Vortechs web and find an authorized dealer, they might be able to get you some better pricing than direct from Vortech?
Kevin

 

[B] I went with a 3.5 in Silicon hose off my Vortech to a Mandrel bent 3.5 ---To a K and N RX 4140 Air filter ---Made cleanin the bugger a little easier--- I used a K and N B020A4 for the breather tube----This was in the forum --I made a couple mods/B]

 

Boogs G35

 

???????????????

 

Are you able to re-locate the filter.from the Vortech the same way between a Z and G?

 

The Z...MT6 , can be ran straight out to the front of the car by the bumper . The AT5 Z..I dont know about . The AT5 G35 , you have to run a pipe or brake duct , down in front of the wheel well and put a filter on the end

 

Jeez Kevin ---I believe it was ur idea ----I bought the left over 3.5 inch silicon fron u ------Am I missing something ?