APS extreme fuel system - pic included
#42
CJ Motorsports
iTrader: (21)
Originally Posted by georgec
I can't see any internal filter in the plastic pump fuel pump assembly (I'll take your word on that though it must be very small) though if there's a filter it's certainly not serviceable in any way, shape, or form. If this filter blocks up over time then you'd have to replace the entire stock plastic fuel pump/swirl pot assembley.
George
George
The reason its not replaceable is because it doesnt need to be in a returnless fuel system. The chances that enough smaller micron contaminants would ever get in the system to actually clog the filter are next to nothing... especially on a returnless car where the fuel only flows OUT.
On a high performance vehicle that is regularly serviced its definatly a good idea to run an inline filter. Surely APS could toss in a nice inline filter with no troubles.
Particles small enough to make it thru the fuel pump pickup screen are still large enough to get in the fuel injectors and block an oriface or prevent proper operation. An imbalance caused by blockage in a fuel injector could be fatal to a high performance engine.
Last edited by phunk; 04-06-2006 at 07:14 PM.
#43
Registered User
Join Date: Dec 2004
Location: Melbourne
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by phunk
Particles small enough to make it thru the fuel pump pickup screen are still large enough to get in the fuel injectors and block an oriface or prevent proper operation. An imbalance caused by blockage in a fuel injector could be fatal to a high performance engine.
George
#44
Banned
iTrader: (28)
Join Date: Dec 2005
Location: Spotswood NJ
Posts: 5,510
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by georgec
That would be ideal for sure and it would be perfect if the new inline filter was fully serviceable as all filters get dirty/partially blocked over time.
George
George
#49
Banned
iTrader: (28)
Join Date: Dec 2005
Location: Spotswood NJ
Posts: 5,510
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RedLeader
You think it's like Michael and Latoya Jackson, where you never see the two of them in the same room?
#50
New Member
iTrader: (9)
Join Date: Sep 2004
Location: West Linn, OR
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
Hey, here's a movie idea: Peter and George, the story of two lonely, conflicted turbo experts with a secret. We'll call it Melbourne Mountain. Oh, sorry, I guess that's already been done
#56
Originally Posted by BrianLG35C
Zivman, so did you get her installed and tuned by Tuan this past weekend? What are the numbers?
Found a boost leak this morning. As of 10 minutes ago, I was told he was at 495 with 2 more lbs of boost to go
#57
Banned
iTrader: (28)
Join Date: Dec 2005
Location: Spotswood NJ
Posts: 5,510
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Zivman
still working on the tune. ran into a couple issues/delays.
Found a boost leak this morning. As of 10 minutes ago, I was told he was at 495 with 2 more lbs of boost to go
Found a boost leak this morning. As of 10 minutes ago, I was told he was at 495 with 2 more lbs of boost to go
#58
Originally Posted by MRC Motorsports
Thats it???
Am I supposed to have a 10000000 hp car?
All I wanted out of this was a cleaner tune, more consistent boost control, and no boost taper. Didn't want more than 510-520 whp so that is what I am being tuned to.
#59
Registered User
iTrader: (4)
Join Date: May 2005
Location: Roy, WA
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Zivman
Am I supposed to have a 10000000 hp car?
All I wanted out of this was a cleaner tune, more consistent boost control, and no boost taper. Didn't want more than 510-520 whp so that is what I am being tuned to.
All I wanted out of this was a cleaner tune, more consistent boost control, and no boost taper. Didn't want more than 510-520 whp so that is what I am being tuned to.