Logging stock knock sensor ?
Thread Starter
Registered User
iTrader: (6)
Joined: Nov 2003
Posts: 10,500
Likes: 2
From: council bluffs Ia.
Ive tapped into the stock knock sensor with the Zietronix user input . It logs the voltage , and it is at 2.53 volts under normal conditions . At 6000rpm to 6500rpm's the voltage starts to get a little wavy and goes up and down from 2.29 to 2.63 volts . Would this be just engine noise , or actaul knock ?
On one of the logs , I did get some spikes to 3.6 volts and I took them as actual knock and retarded timing by [1] degree and I havent gotten any big spikes like that again . Just the slight up or down in volts .
On one of the logs , I did get some spikes to 3.6 volts and I took them as actual knock and retarded timing by [1] degree and I havent gotten any big spikes like that again . Just the slight up or down in volts .
ya i have been thinking of doing this too. nice work. maybe you found the voltage that the ecu designates for knock. now to find out what that voltage translates to frequencies.
Thread Starter
Registered User
iTrader: (6)
Joined: Nov 2003
Posts: 10,500
Likes: 2
From: council bluffs Ia.
Zivman was one that told me you could do it this way . He said that the slight up and down in volts like I discribed ....isnt knock . But i was just trying to get other opinions on it
I have the exact same setup (Zeitronix connected to knock ECU wire). I also get around 2.53-2.56v, but it stays around those numbers all the time, even at WOT. I can send you some logs if you want...
Later,
Later,
Thread Starter
Registered User
iTrader: (6)
Joined: Nov 2003
Posts: 10,500
Likes: 2
From: council bluffs Ia.
Originally Posted by Madelinot
OK, I looked at my logs again. It varies between 2.59 and 2.67, but it stays at 2.61 most of the time.
Could you send that with the original Zetronix program . I dont have Exel . and I tried to change the program , but it doesnt work ....thank Biill
Trending Topics
Thread Starter
Registered User
iTrader: (6)
Joined: Nov 2003
Posts: 10,500
Likes: 2
From: council bluffs Ia.
I PMed him and he seems to think any increase in volts is knock . He said it happens so fast that most loggers will not pick up the whole knock event . Some thing to that effect
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM




