Very Happy w/ Vortech #'s (Dyno Tuned)
#1
Thread Starter
Registered User
iTrader: (2)
Joined: Oct 2005
Posts: 1,220
Likes: 0
From: The Valley, AZ
Very Happy w/ Vortech #'s (Dyno Tuned)
I am Very happy with the numbers I put down yesterday!!!
I finally got her Dyno Tuned... I gained about 30rwhp just from the tune
I think my numbers for the stock SS box and Automatic are very good!!
Here is the Dyno Sheet....
Sorry it took a bit... I had to charge up the camera and I washed my "G" in that time...
These numbers are on a Dyno Dynamics (same as Sentry65 used) from DynoComp in Scottsdale AZ... Dyno Dynamics read 10% lower than a Dyno Jet so my adjusted numbers are...
402.4 rwhp and 342.1 tq
I am VERY HAPPY with these numbers
I finally got her Dyno Tuned... I gained about 30rwhp just from the tune
I think my numbers for the stock SS box and Automatic are very good!!
Here is the Dyno Sheet....
Sorry it took a bit... I had to charge up the camera and I washed my "G" in that time...
These numbers are on a Dyno Dynamics (same as Sentry65 used) from DynoComp in Scottsdale AZ... Dyno Dynamics read 10% lower than a Dyno Jet so my adjusted numbers are...
402.4 rwhp and 342.1 tq
I am VERY HAPPY with these numbers
Last edited by Triji; 07-08-2006 at 10:22 AM.
Trending Topics
#11
I hate posts like this, at least tell us the numbers and post the dyno later, you want us to stay tuned like your numbers are the coolest thing sinced sliced bread. Wont be coming back in here to check
#12
Originally Posted by Alberto
I hate posts like this, at least tell us the numbers and post the dyno later, you want us to stay tuned like your numbers are the coolest thing sinced sliced bread. Wont be coming back in here to check
#13
Originally Posted by Alberto
you want us to stay tuned like your numbers are the coolest thing sinced sliced bread. Wont be coming back in here to check
#14
Thread Starter
Registered User
iTrader: (2)
Joined: Oct 2005
Posts: 1,220
Likes: 0
From: The Valley, AZ
Originally Posted by Alberto
I hate posts like this, at least tell us the numbers and post the dyno later, you want us to stay tuned like your numbers are the coolest thing sinced sliced bread. Wont be coming back in here to check
#18
Thread Starter
Registered User
iTrader: (2)
Joined: Oct 2005
Posts: 1,220
Likes: 0
From: The Valley, AZ
Originally Posted by booger
Looks good ! How come you stopped before 6500rpm ? Could have made more . What psi are you running up top ?
I did not even notice that it cut before 6500... I will have to ask them about that... I am hitting right about 9 psi at the top... It starts to run lean right up there... It goes from pig rich 9.6 at 6400 to the 14's at 6500.... Unless that is right when he takes his foot off the gas I am seeing.