Part II Forged Performance Does It Again (Pics and Dyno)!!!!
#41
New Member
iTrader: (5)
Originally Posted by Alberto
I have never insulted a person who honestly doesnt have track experience. I dont like people who make claims and cant back them up, so for some I will get nasty-for you to act like I "talk down" to people is a joke.
Originally Posted by Alberto
A dyno is a tool, and the way the forums are turning into a "whos got a bigger d!ck/dyno" is a joke.
Originally Posted by Alberto
A 1/4 trap can in fact prove/disprove numbers, unfortunately a driver can also.
Originally Posted by Alberto
Dont even get me started on VRT, Im addressing my issues with Julian as he is questioning numbers (dyno and track) when he is the last person on this site who should given his record recently.
Originally Posted by Alberto
What was your point in this thread other than to drop a worthless comment again? You seem to be good at doing that...
lets all bow down to Alberto the almighty drag racer..
you still havn't answer my comment about you selling your Turbo Kit or why you put it up for sale... or did you get rid of the thread to save face because of all the Turbonetics and ST nut swinging you have done in the past
#42
Banned
iTrader: (28)
Join Date: Dec 2005
Location: Spotswood NJ
Posts: 5,510
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Alberto
Nope dont know the exact settings, all I know its temp adjusted. I highly doubt a simple barometer correction would change numbers 40%, anybody care to chime in on this?
#43
Sponsor
Forged Performance
Forged Performance
iTrader: (92)
Originally Posted by MRC Motorsports
No I will never give up Sharif ..
I would like to know exactly what your atmospheric corrections were as well as the ramp rate on the dyno.This would allow us to simulate exactly the same conditions and know we were all on the same page. I did find, as well as you admited to me on the phone that the temp probe , if touching something hot can inflate the atmospheric corrections. I had a N/A car make 360 whp cause of this.. You know it happens to all of us..I was not trying to discredt you or your tunning, Im sure you are an excellent tuner..However I am simply trying to evaluate the conditions you are using your DD dyno under, so as to better ouw own operation of ours.I admit you are using the DD much longer than we are, and we have seen it do some strange things with HP numbers depending on strap tension, ramp rate,and Atmoshperic corrections..
As far as Albertos comments, I will address via PM so as to keep the thread on topic...
None the less Great numbers, go back to the track with some sticky tires!!
I would like to know exactly what your atmospheric corrections were as well as the ramp rate on the dyno.This would allow us to simulate exactly the same conditions and know we were all on the same page. I did find, as well as you admited to me on the phone that the temp probe , if touching something hot can inflate the atmospheric corrections. I had a N/A car make 360 whp cause of this.. You know it happens to all of us..I was not trying to discredt you or your tunning, Im sure you are an excellent tuner..However I am simply trying to evaluate the conditions you are using your DD dyno under, so as to better ouw own operation of ours.I admit you are using the DD much longer than we are, and we have seen it do some strange things with HP numbers depending on strap tension, ramp rate,and Atmoshperic corrections..
As far as Albertos comments, I will address via PM so as to keep the thread on topic...
None the less Great numbers, go back to the track with some sticky tires!!
When you and i have both spent nearly $50K on these dynos....I still think its best to trust those smart Australian engineers, and let the numbers stand as they are intended to...no extra correction.
And Julian, in case you havent noticed, I have never challenged your dyno numbers, even though they are much more extraordinary. I wish you would extend me the same professional courtesy.
#44
Cranky FI Owner
iTrader: (14)
Doug - you have a personal issue with me or are you just bored? When I post something I have a point/reason behind it. Ill agree recently its been a lot toward MRC, but its because of the constant dyno number corerction (he brought up) crap, I use what I know as an example and you disagree so be it. Its funny you take the time to analyze what I post, clam down and relax a little. Since you have time Id love for you to try to find 1 post by me where I state Im a drag king, or anything near that, people (like you) simply like to think that I am-what I do is not special, but thanks for the attention you have brought to me
Regarding my own car, who do you think you are in questioning/going from post to post asking about it when its clear I wont answer? Its under construction, and when all done Ill post about it ALL, feel free to get down on me then....for what its worth, I dont nutswing TN or AAM, or any shop, I always give credit to good comapnies I deal with and will do the same if I deal with some BS. You can conitune to think what you want of me, I couldnt give a rats a$$...thanks for really taking this thread OT.
OP-I apologize, you have a sick car with a good tune. Id love to see some 1/4times with race rubber in the future the car has tons more in it, that ride musta been scary with no traction. 2.8 60ft = SPINFEST!
Regarding my own car, who do you think you are in questioning/going from post to post asking about it when its clear I wont answer? Its under construction, and when all done Ill post about it ALL, feel free to get down on me then....for what its worth, I dont nutswing TN or AAM, or any shop, I always give credit to good comapnies I deal with and will do the same if I deal with some BS. You can conitune to think what you want of me, I couldnt give a rats a$$...thanks for really taking this thread OT.
OP-I apologize, you have a sick car with a good tune. Id love to see some 1/4times with race rubber in the future the car has tons more in it, that ride musta been scary with no traction. 2.8 60ft = SPINFEST!
#45
Banned
iTrader: (28)
Join Date: Dec 2005
Location: Spotswood NJ
Posts: 5,510
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sharif@Forged
A long time ago, we fell victim to the temp-probe-touching-a-hot-surface issue. I pay close attention to air inlet temps, to make sure the probe is properly situated...and it was. IIRC, standard atmospheric correction on these runs was about 10%....90+ degrees outside...etc..etc. On cold days in the winter, the correction would be about -10%.
When you and i have both spent nearly $50K on these dynos....I still think its best to trust those smart Australian engineers, and let the numbers stand as they are intended to...no extra correction.
And Julian, in case you havent noticed, I have never challenged your dyno numbers, even though they are much more extraordinary. I wish you would extend me the same professional courtesy.
When you and i have both spent nearly $50K on these dynos....I still think its best to trust those smart Australian engineers, and let the numbers stand as they are intended to...no extra correction.
And Julian, in case you havent noticed, I have never challenged your dyno numbers, even though they are much more extraordinary. I wish you would extend me the same professional courtesy.
My car made 580 uncorrected with a 1.05 Atmospheric correction..What does that sound like??
#46
New Member
iTrader: (5)
Originally Posted by Alberto
Doug - you have a personal issue with me or are you just bored? When I post something I have a point/reason behind it. Ill agree recently its been a lot toward MRC, but its because of the constant dyno number corerction (he brought up) crap, I use what I know as an example and you disagree so be it. Its funny you take the time to analyze what I post, clam down and relax a little. Since you have time Id love for you to try to find 1 post by me where I state Im a drag king, or anything near that, people (like you) simply like to think that I am-what I do is not special, but thanks for the attention you have brought to me
what i observe?
I notice everytime someone asks about a turbo kit... Navygolf and other VRT followers suggest JWT and tell them to go to VRT .. even if they are cross country then ship it.. don't worry..
I notice that noah use to work for AAM now he works for performance motorsports and every other post from him now is buy a JWT kit..
I notice that you and Brian (BriGuyMax.. and brian can't take offense because i have known him for years) judge everyone based on their 1/4 mile times... why? becasue you both are excellent drag racers...
I notice that everytime a APS Kit breaks... Chimmike, Craig, yourself and a couple other TN owners jump in and say something..
I notice that everytime a TN Kit breaks... Zivman jumps in and says something..
I notice alot alberto.. doesn't mean i have beef with people here...
Originally Posted by Alberto
Regarding my own car, who do you think you are in questioning/going from post to post asking about it when its clear I wont answer? Its under construction, and when all done Ill post about it ALL, feel free to get down on me then....for what its worth, I dont nutswing TN or AAM, or any shop, I always give credit to good comapnies I deal with and will do the same if I deal with some BS. You can conitune to think what you want of me, I couldnt give a rats a$$...thanks for really taking this thread OT.
Alberto please don't get upset over my observations.. they are meerly observations.. i just tell you what i see.. no need to get upset and run off pissed.
Alberto i really don't have time to look up your other posts on how many times you tell others they can't drive.. everyone knows that you do it.. and its not just Julian... maybe one day when i am bored i will gather the information for you
#47
Cranky FI Owner
iTrader: (14)
Doug-you certainly do observe, as you have just posted the history of the forums lol. I guess you dont understand the point Im trying to make? Or dont agree with how Im doing it? I can post/sell anything I want on a public forum, what else I share is up to me, as you should know by now, Ill post up my situation when the time comes, thats all I have to say about that. For the record I have no problem with you, I just dont like these comments you sometimes make in threads that add nothing to the situation.
#48
New Member
iTrader: (5)
Originally Posted by Alberto
Doug-you certainly do observe, as you have just posted the history of the forums lol. I guess you dont understand the point Im trying to make? Or dont agree with how Im doing it? I can post/sell anything I want on a public forum, what else I share is up to me, as you should know by now, Ill post up my situation when the time comes, thats all I have to say about that. For the record I have no problem with you, I just dont like these comments you sometimes make in threads that add nothing to the situation.
why couple days ago.. I called HotImportGirl out on her bf's statement that he lets her post without searching because they will answer her quicker...
everyone called me a d!ck... all the leg humpers in the thread called me a d!ck and an ahole and that someone will fck me up some day in the near future..
but hey.. i like to observe and i am not shy about it.
#49
Cranky FI Owner
iTrader: (14)
Originally Posted by MRC Motorsports
Sharif,
My car made 580 uncorrected with a 1.05 Atmospheric correction..What does that sound like??
My car made 580 uncorrected with a 1.05 Atmospheric correction..What does that sound like??
And why dont you stop PM'ing me questions I dont have answers to? Ask Sharif himself the things you want to know. I had an issue/observation/question with/toward you, and I asked you for answers. So please dont come to me wanting answers on behalf of another person/shop....why cant people ask questions around here without people blowing up?
#51
Cranky FI Owner
iTrader: (14)
Originally Posted by wtf no turbo
Alberto your car running yet?
Originally Posted by Alberto
Regarding my own car..... Its under construction, and when all done Ill post about it ALL
#52
New Member
iTrader: (17)
Originally Posted by doug
they are meerly observations my good man... i don't care if you tone them down.. or turn them up... i just like to make observations..
why couple days ago.. I called HotImportGirl out on her bf's statement that he lets her post without searching because they will answer her quicker...
everyone called me a d!ck... all the leg humpers in the thread called me a d!ck and an ahole and that someone will fck me up some day in the near future..
but hey.. i like to observe and i am not shy about it.
why couple days ago.. I called HotImportGirl out on her bf's statement that he lets her post without searching because they will answer her quicker...
everyone called me a d!ck... all the leg humpers in the thread called me a d!ck and an ahole and that someone will fck me up some day in the near future..
but hey.. i like to observe and i am not shy about it.
#53
Sponsor
Forged Performance
Forged Performance
iTrader: (92)
Originally Posted by MRC Motorsports
Sharif,
My car made 580 uncorrected with a 1.05 Atmospheric correction..What does that sound like??
My car made 580 uncorrected with a 1.05 Atmospheric correction..What does that sound like??
To answer your previous post..the ramp rate was set at 140. And as an FYI, even on an FI car, a lower or higher ramp rate does not materially change the peak number. It will change how the turbo spools, and the associated change of the trq curve build up. Try it for yourself. Make one run at 160 ramp rate, and another at 130 ramp rate...you numbers will be close..assuming your AF ratio doesnt change. The only factor, is that with different loads, the AF ratio can change, and this will change the whp. But we are doing all the tuning on this particular car, with the same ramp rate..and I already posted by AF chart as well.
If you want to maintain consistently, Julian...turn your extra correction to 1.00 (no correction), and run your standard atmo correction...whatever that is on a given day.
#54
Banned
iTrader: (28)
Join Date: Dec 2005
Location: Spotswood NJ
Posts: 5,510
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Alberto
At what boost level? You first claimed 12psi, now 15psi what is the truth?!
And why dont you stop PM'ing me questions I dont have answers to? Ask Sharif himself the things you want to know. I had an issue/observation/question with/toward you, and I asked you for answers. So please dont come to me wanting answers on behalf of another person/shop....why cant people ask questions around here without people blowing up?
And why dont you stop PM'ing me questions I dont have answers to? Ask Sharif himself the things you want to know. I had an issue/observation/question with/toward you, and I asked you for answers. So please dont come to me wanting answers on behalf of another person/shop....why cant people ask questions around here without people blowing up?
#55
Cranky FI Owner
iTrader: (14)
Originally Posted by MRC Motorsports
We we actually running 15 psi, we had a problem with the boost line going to the dyno, so we thought we were running 12 psi, but it was actually 15.5 ish, now were running 18.5-19 psi and have yet to re dyno..Please leave me the **** alone now...
#56
Banned
iTrader: (28)
Join Date: Dec 2005
Location: Spotswood NJ
Posts: 5,510
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sharif@Forged
That sounds like a very solid number...good job!
To answer your previous post..the ramp rate was set at 140. And as an FYI, even on an FI car, a lower or higher ramp rate does not materially change the peak number. It will change how the turbo spools, and the associated change of the trq curve build up. Try it for yourself. Make one run at 160 ramp rate, and another at 130 ramp rate...you numbers will be close..assuming your AF ratio doesnt change. The only factor, is that with different loads, the AF ratio can change, and this will change the whp. But we are doing all the tuning on this particular car, with the same ramp rate..and I already posted by AF chart as well.
If you want to maintain consistently, Julian...turn your extra correction to 1.00 (no correction), and run your standard atmo correction...whatever that is on a given day.
To answer your previous post..the ramp rate was set at 140. And as an FYI, even on an FI car, a lower or higher ramp rate does not materially change the peak number. It will change how the turbo spools, and the associated change of the trq curve build up. Try it for yourself. Make one run at 160 ramp rate, and another at 130 ramp rate...you numbers will be close..assuming your AF ratio doesnt change. The only factor, is that with different loads, the AF ratio can change, and this will change the whp. But we are doing all the tuning on this particular car, with the same ramp rate..and I already posted by AF chart as well.
If you want to maintain consistently, Julian...turn your extra correction to 1.00 (no correction), and run your standard atmo correction...whatever that is on a given day.
#57
Registered User
iTrader: (25)
Join Date: Oct 2003
Location: Orlando, FL
Posts: 2,864
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by doug
i don't understand how you can equate that with my personality when people are calling me a d!ck in threads in this very forum... i for one don't sugar coat things are care about other people's feelings, however... you seem to go after the same people all the time (VRT and MRC) and if thats not the case you are telling people that they can't drive for ****... Street racing forum.. thats your main argument.. get some time slips.. get some time slips... it appears what you seem to be good at must be the gold standard for how everyone's car is measured.
why is it that VRT's amazing ability to drive cars around a road course can't be a measurement for a cars power? what? because its all driver skill? newsflash bert... Drag Racing is driver skill... just because you know how to drag race and you have good times... everyone else is a ****ty driver or their car isn't as advertised. Last time i checked... a dyno was the measurement for power.. not trap speed or 1/4 mile time
why is it that VRT's amazing ability to drive cars around a road course can't be a measurement for a cars power? what? because its all driver skill? newsflash bert... Drag Racing is driver skill... just because you know how to drag race and you have good times... everyone else is a ****ty driver or their car isn't as advertised. Last time i checked... a dyno was the measurement for power.. not trap speed or 1/4 mile time
#59
Registered User
iTrader: (8)
Join Date: Nov 2004
Location: Miami, FL
Posts: 4,328
Likes: 0
Received 0 Likes
on
0 Posts
I am going to make my own thread, but it seems appropriate to post here as well. About a month ago Sam from GTM tuned my car on Sharif's dyno. I made 510whp and 490ft/tq @ 16psi with an a/f of 11.4-11.5. Today I took my car to a local dyno jet and I made 526whp and 526ft/tq @ 16 psi with an a/f of 10.7. This was SAE corrected with 1.02. So you see there's not much of a difference between a dyno jet and dyno dynamics. If you add 25 or so hp because of the lower a/f I would be at 550whp and 550ft/tq which is not even 10% more than what I orginally did on Sharif's dyno.
I will post a new thread with the new dyno graphs.
I will post a new thread with the new dyno graphs.
Last edited by Gman2004; 08-21-2006 at 10:40 AM.
#60
Sponsor
Forged Performance
Forged Performance
iTrader: (92)
Originally Posted by Gman2004
I am going to make my own thread, but it seems appropriate to post here as well. About a month ago Sam from GTM tuned my car on Sharif's dyno. I made 510whp and 490ft/tq @ 16psi with an a/f of 11.4-11.5. Today I took my car to a local dyno jet and I made 526whp and 526ft/tq @ 16 psi with an a/f of 10.7. This was SAE corrected with 1.02. So you see there's not much of a difference between a dyno jet and dyno dynamics. If you add 25 or so hp because of the lower a/f I would be at 550whp and 550ft/tq which is not even 10% more than what I orginally did on Sharif's dyno.
I will post a new thread with the new dyno graphs.
I will post a new thread with the new dyno graphs.