so are you just rebuilding your turbo or are you replacing it?

 

I had to order a sh*tload of replacement parts after driving her into a cement pole a couple weeks back...

The impact was sufficient enough to drive the intake piping into the compression housing of the turbo and breaking the center cartridge piece(which includes the blades, the bearings, etc) thus allowing the turbine to grind to halt into the housing. Was a bad Saturday when I found this out...

The housings were salvageable, and thanks to Tig's advice, was able to unbolt the housings, order a new center cartridge, and re-attach the housings... new turbo for $975.

DynoComp is my local APS dealer, and I went through them for the replacement APS parts as a result of the accident.

I went through John at AGP Turbo for the replacement CHRA; cost through APS was $1771 *shakes head*

EDIT: Oh, and I replied to your PM