Promised Pics of my Z
Thread Starter
Registered User
iTrader: (3)
Joined: Jun 2005
Posts: 423
Likes: 0
From: Indianapolis, IN
Hey guys...
Thought I would post a couple pics that were not in Sharif's Shop of the car.
Took these a few days ago at a local car show. I will be putting on some of the new Volk GT-S wheels with wider tires in the next few weeks to keep the power to the ground, not to mention these things have a 5" lip in the rear...
Update to the last posting as well (452hp DD stock block) ... I am already working on getting a motor put together to come out with in the spring. Shooting for 650whp with the stock 18g turbos. We will see what happens, looks like that is about the limit of the turbos before they are just being over worked. I figure I can get there with 18-20psi of boost. Stock sleeves, 8.6:1 CR, cams, and mild head work.
On with the pics, hope you guys like!

Thought I would post a couple pics that were not in Sharif's Shop of the car.
Took these a few days ago at a local car show. I will be putting on some of the new Volk GT-S wheels with wider tires in the next few weeks to keep the power to the ground, not to mention these things have a 5" lip in the rear...
Update to the last posting as well (452hp DD stock block) ... I am already working on getting a motor put together to come out with in the spring. Shooting for 650whp with the stock 18g turbos. We will see what happens, looks like that is about the limit of the turbos before they are just being over worked. I figure I can get there with 18-20psi of boost. Stock sleeves, 8.6:1 CR, cams, and mild head work.
On with the pics, hope you guys like!

Thread Starter
Registered User
iTrader: (3)
Joined: Jun 2005
Posts: 423
Likes: 0
From: Indianapolis, IN
What color on the wheels?
Trending Topics
Originally Posted by jkenefic
The new Volks are the Gunmetal with polished lip, same color scheme as what is on the car now. I wanted a wider rim to fit the 305s on, I have 10' now, the Volks are 10.5".
Thread Starter
Registered User
iTrader: (3)
Joined: Jun 2005
Posts: 423
Likes: 0
From: Indianapolis, IN
Thanks for all of the complements guys! Glad you all like my taste...
I think I am going to switch the canards to carbon fiber if/when I get the wing, since the blade of the wing is carbon also. If not, I may have to take everyones advice and go satin black on the canards to match the center grill area...
275/35/19 Bridgestone RE050As I think I am going to stick with the same tire, just go with a 305/30/19 instead. Providing I won't rub on anything. If not 295 for sure.
I think I am going to switch the canards to carbon fiber if/when I get the wing, since the blade of the wing is carbon also. If not, I may have to take everyones advice and go satin black on the canards to match the center grill area...
You must come down to Chicago one of these days! What tire sizes are you running now?
^ If you are going with the GT-S, which offsets? If the aggressive offsets, you will rub and the tires will stick outside of the fender. Actually, I believe the conservative offset +28 will also be too wide for 305, 295 should work with that setup, but you might have to run some negative camber and cut/roll fenders.




