Special $10,000.00 Turbonetics kit?!
10-09-2006, 07:33 AM
#61
New Member
iTrader: (13)
i dunno if he deserved being banned, as much stupid as he might have been on his cheapness(maybe), he never insulted or anything so i dunno if that ammounts to enoguh reason to have someone being banned...
sounds a bit harsh..
I do agree the pricess seem abit high, and i woudl think with the ammount of ecperience you guys have, you could do this installs quicker and good so the savings on time of install shouldn't be more than other competitor shops. Makes no sense.
In any case it is a shame someone got banned over this. I hope you guys do better in the future at customer service(sounds like its a step there). It is just as important as knowledge, producsts(which AAm does have some nice ones) and pricing(should be fair).
sounds a bit harsh..
I do agree the pricess seem abit high, and i woudl think with the ammount of ecperience you guys have, you could do this installs quicker and good so the savings on time of install shouldn't be more than other competitor shops. Makes no sense.
In any case it is a shame someone got banned over this. I hope you guys do better in the future at customer service(sounds like its a step there). It is just as important as knowledge, producsts(which AAm does have some nice ones) and pricing(should be fair).
10-09-2006, 08:15 AM
#62
Registered User
Join Date: Sep 2006
Location: Owings Mills, Maryland
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Osix350Z
You need to take a step back, read my OP, then revise your response...
AAM tried to charge me TEN THOUSAND DOLLARS for a TN setup w/UTEC...
They also told me that I was getting a "DEAL" I was getting "HOOKED UP"..
So what would the price have been without the "HOOK UP"? Maybe you wanna lick their A$$ for whatever reason and that's fine, obviously that's your thing... I don't like being screwed, I expect to be treated with a certain amount of respect, not taken for all the money they can get....
AAM tried to charge me TEN THOUSAND DOLLARS for a TN setup w/UTEC...
They also told me that I was getting a "DEAL" I was getting "HOOKED UP"..
So what would the price have been without the "HOOK UP"? Maybe you wanna lick their A$$ for whatever reason and that's fine, obviously that's your thing... I don't like being screwed, I expect to be treated with a certain amount of respect, not taken for all the money they can get....
Osix was harsh, not the way to solicite help !!!
10-09-2006, 08:38 AM
#64
i agree mike was a little harsh but i do not think he should be banned.he was voiceing his displeasure with the treatment he received and what he thought was price gouging on thier part against him.i personally know mike and he is a very easy going guy unless something gets under his skin,i think aam did that and i know he did his research on the prices.i mean hell he had enough resources in which to ask being from the mid atlantic area.lift the ban.
10-09-2006, 09:03 AM
#65
Originally Posted by superchargedg
i agree mike was a little harsh but i do not think he should be banned.he was voiceing his displeasure with the treatment he received and what he thought was price gouging on thier part against him.i personally know mike and he is a very easy going guy unless something gets under his skin,i think aam did that and i know he did his research on the prices.i mean hell he had enough resources in which to ask being from the mid atlantic area.lift the ban.
10-09-2006, 09:06 AM
#66
people dont realize that it takes money to safely build up a FI car. honestly these people who gripe should never go FI, sell their z's, and go back to the mustangs and corvettes they came from - those are alot cheaper to make faster. enjoy your government cheese
10-09-2006, 09:24 AM
#68
Registered User
Join Date: Aug 2006
Location: gaithersburg
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Banned
Originally Posted by Freak
i blind man can see that the Admin banned him per AAM's wishs. its quite obvisous that this forum is just a money maker and AAM is paying 
The moderator mad the decision on his own.
10-09-2006, 09:26 AM
#69
Originally Posted by Havok_RLS2
You sir are an ID10T. That has already been covered meatballs. Read the thread before make stupid comments.
10-09-2006, 09:31 AM
#71
Registered User
iTrader: (16)
Join Date: Mar 2004
Location: Nashville, TN
Posts: 2,939
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Freak
i blind man can see that the Admin banned him per AAM's wishs. its quite obvisous that this forum is just a money maker and AAM is paying
10-09-2006, 09:52 AM
#74
Registered User
iTrader: (5)
Join Date: Feb 2003
Location: Virginia
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Z PHAT Z
I think it's kinda expensive for 12k. Sorry if I'm wrong or there are many other things I don't see you listed. But I agreed with you, CS is the most important issue.
$4,500 TN kit
$1000 to $1,500 installation
$900 JWT clutch/flywheel
$500 clutch installation
$400 wideband
$700 gauges
==========
Total $8500.
$4,500 TN kit
$1000 to $1,500 installation
$900 JWT clutch/flywheel
$500 clutch installation
$400 wideband
$700 gauges
==========
Total $8500.
oil pan spacer and steel braided lines
clutch install fee
hotchkis swaybars
install labor for springs, shocks
all fluid changes
making custom reverse y pipe for Evo II
SS clutch line
I am sure I forgot something else...
10-09-2006, 11:02 AM
#76
Im not getting in this, or voicing my opinion on this whole situation. I will say though-Mike wasnt banned because of this thread, it was because of some PM's back and forth one night last weekend where he was tanked and prolly shouldnt have been on the boards lol.
10-09-2006, 11:45 AM
#79
Professional
iTrader: (2)
Join Date: Jan 2006
Location: Virginia
Posts: 4,398
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by o snap its eric
i want to know the future parts that will be offered by AAM that will benifit us
