Cheapest place for FCON?
Originally Posted by RedLeader
As much as I'd like to have the FCON, I'm not thrilled about having to run to my authorized dealer everytime I want to switch maps to run higher boost and racegas. The V-Pro isn't multi-map switchable by the driver, right?
Originally Posted by Sharif@Forged
Users can switch maps on their own, either via the side mounted dip switches, or the more elegant Navigator Pro. 

From my understandign the navigator pro only allowed small adjustments, rather than new maps.
I have two boost settings on my setup though both for 92 octane. My tuner just tuned the map to include both boost settings and I merely hit a switch on my EBC to change from 12 psi to 17 psi
zivman- I have a conservative tune on my UniChip right now and switch my EBC when I want to run higher octane fuel. In my mind, that means the tune isn't really optimal for either boost setting.
I guess I better read some FCON threads and get up to speed. You guys have given me hope.
Sharif, are you still thinking about a trip to Portland for a tuning flurry?
I guess I better read some FCON threads and get up to speed. You guys have given me hope.
Sharif, are you still thinking about a trip to Portland for a tuning flurry?
Last edited by RedLeader; Feb 14, 2007 at 12:45 PM.
Originally Posted by Zivman
From my understandign the navigator pro only allowed small adjustments, rather than new maps.
I have two boost settings on my setup though both for 92 octane. My tuner just tuned the map to include both boost settings and I merely hit a switch on my EBC to change from 12 psi to 17 psi
I have two boost settings on my setup though both for 92 octane. My tuner just tuned the map to include both boost settings and I merely hit a switch on my EBC to change from 12 psi to 17 psi
Originally Posted by RedLeader
zivman- I have a conservative tune on my UniChip right now and switch my EBC when I want to run higher octane fuel. In my mind, that means the tune isn't really optimal for either boost setting.
I guess I better read some FCON threads and get up to speed. You guys have given me hope.
Sharif, are you still thinking about a trip to Portland for a tuning flurry?
I guess I better read some FCON threads and get up to speed. You guys have given me hope.
Sharif, are you still thinking about a trip to Portland for a tuning flurry?
Originally Posted by RedLeader
zivman- I have a conservative tune on my UniChip right now and switch my EBC when I want to run higher octane fuel. In my mind, that means the tune isn't really optimal for either boost setting.
I guess I better read some FCON threads and get up to speed. You guys have given me hope.
Sharif, are you still thinking about a trip to Portland for a tuning flurry?
I guess I better read some FCON threads and get up to speed. You guys have given me hope.
Sharif, are you still thinking about a trip to Portland for a tuning flurry?
Originally Posted by Zivman
The unichip is an entirely different beast than the Fcon. My tune incorporates both boost settings. Think of it like this; my tune is for 17 psi, but I can turn the boost down to 12 psi when I want to. The Fcon is tuned for both points and with the additon of the AFR/knock amp, the EMS is constantly monitoring what is going on. Heck, even when I popped a coupler, my AFRs where still dead on, and the car still ran perfect - beyond not making boost. Basically, You just need to make sure you don't hit a boost level that has not been tuned for
Thanks for the additional info Sharif. Do you happen to know what the largest Tial BOV is and is it a reliable good sounding piece? I don't really like the high pitched notes of the Type S and HKS SSQV.
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
Oct 29, 2020 07:44 PM




