I Can Thank Turbonetics For This!!!
#21
Registered User
Join Date: Apr 2003
Location: Houston
Posts: 1,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sentry65
some people with TT's have actually destroyed their actual turbos where the turbine wheels were all chewed up. At least the TN kit places the turbo up and out of the way and is further away from all the force blowing up in the engine
#23
Registered User
Thread Starter
iTrader: (9)
Join Date: Aug 2005
Location: South Florida
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
1. Yes I have that new pipe
2. SSV & 3in Exhaust
3. Mid to high tens pretty rich
2. SSV & 3in Exhaust
3. Mid to high tens pretty rich
Originally Posted by MRC Motorsports
#1)Did you have the Overboost pipe kit? (was it a newer kit?)
#2) did you add mods that increase boost pressure and reduce back pressure such as exhaust, plenum?
#3) What was you A/F like on the kit?
I have noticed the spring in WG in the TN kit does spike a bit, we usually replace them with the 5psi spring to prevent spiking..otherwise you see 9-11psi spikes alot..Even with the Overboost pipe.
#2) did you add mods that increase boost pressure and reduce back pressure such as exhaust, plenum?
#3) What was you A/F like on the kit?
I have noticed the spring in WG in the TN kit does spike a bit, we usually replace them with the 5psi spring to prevent spiking..otherwise you see 9-11psi spikes alot..Even with the Overboost pipe.
#25
Registered User
iTrader: (1)
Join Date: Oct 2006
Location: Rio Rancho, NM
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ten to Four Z
3. Mid to high tens pretty rich
Edit: Never mind my comment. I misread that and thought you said teens.
Last edited by Casuale17; 02-27-2007 at 11:37 AM.
#26
Registered User
Thread Starter
iTrader: (9)
Join Date: Aug 2005
Location: South Florida
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
New Motor
My new motor will have:
wiesco pistons
eagle rods
hks head gaskets
arp hardware
jwt C2 cams
jwt springs
Utec - map switch - boosted control - map sensor
koyo radiator
oil cooler
cjm fuel return
650cc injectors
There is more stuff I just can think of any right now.
By the way Japtrix Is doing all the work.
wiesco pistons
eagle rods
hks head gaskets
arp hardware
jwt C2 cams
jwt springs
Utec - map switch - boosted control - map sensor
koyo radiator
oil cooler
cjm fuel return
650cc injectors
There is more stuff I just can think of any right now.
By the way Japtrix Is doing all the work.
#28
Registered User
Thread Starter
iTrader: (9)
Join Date: Aug 2005
Location: South Florida
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sharif@Forged
Did a vaccum line come off, or just pure and simple overboost. What boost controller are you using..if any.
#29
New Member
iTrader: (15)
Join Date: Aug 2005
Location: Leesburg, VA
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ten to Four Z
My new motor will have:
wiesco pistons
eagle rods
hks head gaskets
arp hardware
jwt C2 cams
jwt springs
Utec - map switch - boosted control - map sensor
koyo radiator
oil cooler
cjm fuel return
650cc injectors
There is more stuff I just can think of any right now.
By the way Japtrix Is doing all the work.
wiesco pistons
eagle rods
hks head gaskets
arp hardware
jwt C2 cams
jwt springs
Utec - map switch - boosted control - map sensor
koyo radiator
oil cooler
cjm fuel return
650cc injectors
There is more stuff I just can think of any right now.
By the way Japtrix Is doing all the work.
That was fast. I like your piston choice.
#31
New Member
iTrader: (15)
Join Date: Aug 2005
Location: Leesburg, VA
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ten to Four Z
What can I say I want my car back. Now I need a bigger turbo with a higher CFM any suggestions?
#35
New Member
iTrader: (15)
Join Date: Aug 2005
Location: Leesburg, VA
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ten to Four Z
Sorry, my turbo is fine but now with the built motor id also like more power!
#39
Registered User
Thread Starter
iTrader: (9)
Join Date: Aug 2005
Location: South Florida
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by priscilla ls1
Ohh. Do you want to keep the kit and stay single, and just get a bigger turbo or sell the kit and go twins?