Dilemma, dilemma... If you tuning gods have a choice between the RC 750cc injector and the SARD 800cc injector, and their prices are similar, which one would you go for?

 

I'm going with rc750's cuz it's what my installer recommends, he's comfortable tuning with them, and has in his 600whp plus 350z. that's good enough for me. check with your tuner.

 

i had rc's w/ my old tt kit. never had a problem. i trust them

 

Rc hands down

 

SARD!!!

a lot of RC fans here ???

 

deutchwerks.

 

HKS lol thought i would be different..


its all up to you i assume.. i run RC's but ill probably upgrade

 

I heard rc's spray pattern was irregular at times, sard and hks are much more predictable. I had bad rc's - not fun.

 

My understanding is that RC doesn't manufacture anythnig but reconditions other injectors afterwhich they are labeled RC. THe RC injectors I've seen were either Bosch or Rochester. I suspect there are other injectors that are also just rebranded.

 

+1. RC's spray pattern at idle and low rpm sucks. At WOT it doesn't really matter, but if you want the best all around driveability go with a better injector.

Also I've heard on several ocassions of RC's getting stuck open. With that said the RC's will get the job done.

 

Thats what Ive been told . And when I change my EMS , new injectors will also be installed

 

Well it depends on what you can use to tune, I have the normal high impedance RC 750 cc's and idle is not perfect, hard to get it consistent and it bugs me, it might be fine for some but I want this car to behave like it came from the factory, so after checking around and talking with HKS and input from Sharif I am going to try the low impedance RC 1000 cc injectors since the Fcon can handle the low impedance. I would have gone with HKS but I have sunk too much in this so far, even with dealer pricing. Waiting on new wheels already.

 

For powers of stock block deashtwerks IMO

high whp build engine id use big HKS injectors

 

I went with the HKS cause the crappy idle I had with the RC's really bugged me too. I don't remember what I paid for my HKS injectors, but IIRC they weren't that much more expensive. What's the price difference between the two?

 

+1...if I had to do it over again, hks 1000's for me instead of trying to pinch a few dollars., esp w/ the fcon.

 

Basically, a Denso made injector is what you want (SARD, HKS, etc)

 

Sard... i heard was good from a few friends and R/C was crap according to them, but of course this is word of mouth.... I have sard stuff but have never compared r/c

 

I would recommend SARD because they use Denso injectors (same as HKS) these injectors will have a better spray pattern and are more reliable. I am not a fan of RC injectors because of their inconsistency and spray patterns. They are less expensive be we all know in life there are always two ways to get things done...

Just my .02

-George
GT Motorsports

 

I can't belive that the first 3 recommendation were all RC...

RC is crap. Just look at the technology behind it. Denso all the way (SARD in this case).

 

anyone got a hookup on Sard injectors?

and dont you have to modify something to get the hks 1000 cc's to work?