Well friday we took all the stillen stuff off and it was a peice of cake.Saturday we started installing the twins and got everything done except the intercooler and piping (what a pain in the **** doing it with the motor in the car).Well today we installed the ic and driver side piping with no problems,the greddy instructions are total crap btw.The pic,s are all from the driver side and no pic,s of the pass. side.
I am in desperate need of advise or really pic,s of the pass side pipe routing.
Does anybody have pic,s of how the routing goes cause im either stupid or blind cause i cant figure this out dammit.Sharif im calling you in the morning on monday cause i hope greddy didnt send the wrong ic piping even though it says it is for a g.

Thanks for any help anyone can give,keith.

 

Your welcome to come take a look at mine if you want. I had a link that i'll try and find for you. It was for a 350 but, its similiar.

 

Please try and find that link and where are you in md.

 

I'm in Bethesda. I've heard of your area. It's around Baltimore correct? I'll dig around for the link.

 

Thanks man i do thank you if you can find the link.Yea im north of baltimore city.

 

did you eat the cake? does cake have an effect on car performance when installed properly? how does one install cake in a car?

 

I sent you the video...did it help?

 

Thanks for the vid but it really didnt show what i need.I have it all hooked up but i know its not the way it should be(a little backyard enginnering)i used most of the ic pipes and everything is tight and sealed.When i drive it down to functiontuned im gonna let dave laugh his butt off and just have him correct it.Iactually think a peice from the kit did not come,it looks like it should have been a u shaped pipe off of the pass side turbo and i didnt get that,but i counted all the pipes and the number was right.The greddy kit has the worst instructions i have ever seen.

Thanks sharif for trying to help.

 

But the vid shows a closeup of exactly how the passenger side turbo outlet piping shoud look. Hope its ok.

 

Thanks sharif but ill get it figured out......with daves help.

 

Yeah, this wont be Dave's first rodeo...you are in good hands.