Forged Performance: SGP Built 5AT, GReddy TT, F-CON VPro, 504whp@16psi
#1
Forged Performance: SGP Built 5AT, GReddy TT, F-CON VPro, 504whp@16psi
As usual, Sharif, Chris & Devon did outstanding work. Thanks also to Michael, Sandy and new FP employee Dylan. Chuck and I had a great time and quite a few laughs.
Here is what was done.
my car:
Install SGP Race Built 5AT
Install Pro Torque TC
Install Earl's 16 Row Trans Cooler
Install Steel Braided Lines to Cooler
Install HKS 1000cc Injectors
Install HKS EVC VI Boost Controller
Re-Tune to 16psi
Chucky's car:
Install my stock 5AT with modified VB
After installing the new transmission and some prelim road testing, Sharif put it on the dyno and did some tuning. Here are the results at 16psi and some race gas. The tune was not optimized for the race gas which was used as a measure of safety. I couldn't be happier with the car now. It feels very smooth throughout and perfect idle. The shifts are fast and firm. The car just feels rock solid and nasty fast. Chuck's car is finally shifting fast and hard and running great.
Here are some pics, dyno sheet and a video. Enjoy!
16psi Dyno Dynamics, uncorrected in Shootout mode.
The tow - my wife's QX56 and Chuck's G35
I'm worried - will it be done in time?
Chris playing with my driveshaft - WTF? Notice Shairf trying to be serious on phone.
Chuck's car under the knife
New trans cooler setup
Chris trying to get in the car
Someone's tampered with my decals
Sharif and I happy that it's done
Hmmmmm, a green monster on the way
Video - 496whp pull
Video
Here is what was done.
my car:
Install SGP Race Built 5AT
Install Pro Torque TC
Install Earl's 16 Row Trans Cooler
Install Steel Braided Lines to Cooler
Install HKS 1000cc Injectors
Install HKS EVC VI Boost Controller
Re-Tune to 16psi
Chucky's car:
Install my stock 5AT with modified VB
After installing the new transmission and some prelim road testing, Sharif put it on the dyno and did some tuning. Here are the results at 16psi and some race gas. The tune was not optimized for the race gas which was used as a measure of safety. I couldn't be happier with the car now. It feels very smooth throughout and perfect idle. The shifts are fast and firm. The car just feels rock solid and nasty fast. Chuck's car is finally shifting fast and hard and running great.
Here are some pics, dyno sheet and a video. Enjoy!
16psi Dyno Dynamics, uncorrected in Shootout mode.
The tow - my wife's QX56 and Chuck's G35
I'm worried - will it be done in time?
Chris playing with my driveshaft - WTF? Notice Shairf trying to be serious on phone.
Chuck's car under the knife
New trans cooler setup
Chris trying to get in the car
Someone's tampered with my decals
Sharif and I happy that it's done
Hmmmmm, a green monster on the way
Video - 496whp pull
Video
Last edited by roncfpz; 07-31-2007 at 02:55 PM.
Trending Topics
#12
Banned
iTrader: (21)
Join Date: Dec 2003
Location: Florida
Posts: 4,472
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by George@GTM
Love those wheels Ron, 20's FTW , Oh yea nice numbers too
-George
GT Motorsports
-George
GT Motorsports
#13
Sponsor
Forged Performance
Forged Performance
iTrader: (92)
Originally Posted by coachk
GTM...is the built tranny on the market now? If you could do a new thread with a quick write up on it, it would be appreciated.
#15
Banned
iTrader: (21)
Join Date: Dec 2003
Location: Florida
Posts: 4,472
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sharif@Forged
We have a GTM Stage3 trans in house that is going into RCDash's G35. Should be nice to compare the two setups. Finally the 5AT guys have some beefy trans options on the market.
Is Rons race built different from the stage 3. If you could break them down for us that would be great(unless GTM is not ready to let the info out yet).
Thanks
#17
Twin Spoolin
iTrader: (6)
Join Date: Apr 2003
Location: FL
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by paranormal
ron what wheels are those? they look really good.
Here's from a post by Ron....
Originally Posted by roncfpz
Here are some better pics of the new wheels on the Z. I'm really liking these better since the spokes are much closer to the brakes. The rear lips are 4.5" front is over 3". I've got some custom center caps coming in black & red w/white lettering. COR is relatively new, making wheels custom to order. You can check them out at www.corwheels.com. Excellent quality and great service.
Here are the specs:
20x9 F +20 offset
20x11 R +32 offset
255/30/20
305/25/20
Here are the specs:
20x9 F +20 offset
20x11 R +32 offset
255/30/20
305/25/20