Amazing Breakthrough following DIY Build
#282
Z + Rear Seat
iTrader: (3)
Join Date: Jun 2005
Location: St.Pete,FL
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rrmedicx
Don't know u in AZ or how u think you could possibly know something in NY, but I am having my cams upgraded to GTM 272's since the BC stage 3's aren't going to be available for another few months. My last set of JWT cams were a bit chewed up so before they got any worse and broke down I brought it back to my tuner to resolve before any catastrophic failure occurred.
Yes, I've had my share of bad luck, but it was all part of the learning process.
Yes, I've had my share of bad luck, but it was all part of the learning process.
How did you notice they were chewed up?
I'm getting set to put a set of JWT cams in my new motor. Just wanting to make sure there's not any kind of manufacturing problem.
#284
Originally Posted by __jb
What happened to the JWT cams? Do you mean the lobes wore off for some reason? What kind of valve springs were you using?
How did you notice they were chewed up?
I'm getting set to put a set of JWT cams in my new motor. Just wanting to make sure there's not any kind of manufacturing problem.
How did you notice they were chewed up?
I'm getting set to put a set of JWT cams in my new motor. Just wanting to make sure there's not any kind of manufacturing problem.
Idle not as smooth as I'd like it to be. I recycled the cams from the stock motor and then from the last build (that both blew) so my plans were always to replace them anyway (just didn't have the cash at that time). They had some very minor scars on them which I was told could be polished out. Besides the 272 GTM cams are supposed to be the bomb, so I had the interest in upgrading anyway.
Using JWT Springs and retainers.
#285
Originally Posted by LILjiMMYj0NES
Oh, so your the hack then.Problem solved.
I don't know you and I know you don't know me. If you have something to say that doesn't involve this build that I suggest you take it offline! If you have a direct question you can PM me, but don't come on to just start BS about what you don't know.
My car is being worked on just as I described. I am upgrading cams because I feel that the ones I am currently running (JWT) have been damaged to the point where it could POTENTIALLY have a negative long term affect on my car. The current set-up is doing just fine making 530 rwhp with the help of TurboTrix tuning the ProEFI.
YES MY BUILD WAS NOT PERFECT from the start, but it was a learning process that I was not ashamed to share with all of you so hopefully you and the countless others could benefit from the results. I am a DIY type of person and Thousands of folks on this forum and other forums have thanked me for the hours and money I saved them in sharing my results.
I don't know if you are a mechanic or just another wanna be, and frankly I don't care, but I can tell you that I have earned the respect of a lot of the folks on this forum for coming out with the truth about my build despite my many issues. It takes guts to risk a $35,000 car and breaking it down to nuts and bolts. (Don't know how many times u did this?) I put out a lot of my own $$$ into this car and can say that the car now owns me. I am very fortunate to have had this experience and wouldn't trade it for the world. I don't need anyone telling me what to do or how to do it. Especially not you! So unless you have something constructive to offer I would appreciate you to BUTT OUT!
#286
Registered User
Originally Posted by rrmedicx
Well Mr. Liljimmy know it all...I don't know your motive for coming on to this thread and starting a bunch of Sh*t. (Apparently you have a habit of doing this on other threads & forums as well.)
I don't know you and I know you don't know me. If you have something to say that doesn't involve this build that I suggest you take it offline! If you have a direct question you can PM me, but don't come on to just start BS about what you don't know.
My car is being worked on just as I described. I am upgrading cams because I feel that the ones I am currently running (JWT) have been damaged to the point where it could POTENTIALLY have a negative long term affect on my car. The current set-up is doing just fine making 530 rwhp with the help of TurboTrix tuning the ProEFI.
YES MY BUILD WAS NOT PERFECT from the start, but it was a learning process that I was not ashamed to share with all of you so hopefully you and the countless others could benefit from the results. I am a DIY type of person and Thousands of folks on this forum and other forums have thanked me for the hours and money I saved them in sharing my results.
I don't know if you are a mechanic or just another wanna be, and frankly I don't care, but I can tell you that I have earned the respect of a lot of the folks on this forum for coming out with the truth about my build despite my many issues. It takes guts to risk a $35,000 car and breaking it down to nuts and bolts. (Don't know how many times u did this?) I put out a lot of my own $$$ into this car and can say that the car now owns me. I am very fortunate to have had this experience and wouldn't trade it for the world. I don't need anyone telling me what to do or how to do it. Especially not you! So unless you have something constructive to offer I would appreciate you to BUTT OUT!
I don't know you and I know you don't know me. If you have something to say that doesn't involve this build that I suggest you take it offline! If you have a direct question you can PM me, but don't come on to just start BS about what you don't know.
My car is being worked on just as I described. I am upgrading cams because I feel that the ones I am currently running (JWT) have been damaged to the point where it could POTENTIALLY have a negative long term affect on my car. The current set-up is doing just fine making 530 rwhp with the help of TurboTrix tuning the ProEFI.
YES MY BUILD WAS NOT PERFECT from the start, but it was a learning process that I was not ashamed to share with all of you so hopefully you and the countless others could benefit from the results. I am a DIY type of person and Thousands of folks on this forum and other forums have thanked me for the hours and money I saved them in sharing my results.
I don't know if you are a mechanic or just another wanna be, and frankly I don't care, but I can tell you that I have earned the respect of a lot of the folks on this forum for coming out with the truth about my build despite my many issues. It takes guts to risk a $35,000 car and breaking it down to nuts and bolts. (Don't know how many times u did this?) I put out a lot of my own $$$ into this car and can say that the car now owns me. I am very fortunate to have had this experience and wouldn't trade it for the world. I don't need anyone telling me what to do or how to do it. Especially not you! So unless you have something constructive to offer I would appreciate you to BUTT OUT!
#287
New Member
iTrader: (10)
Originally Posted by rrmedicx
Well Mr. Liljimmy know it all...I don't know your motive for coming on to this thread and starting a bunch of Sh*t. (Apparently you have a habit of doing this on other threads & forums as well.)
I don't know you and I know you don't know me. If you have something to say that doesn't involve this build that I suggest you take it offline! If you have a direct question you can PM me, but don't come on to just start BS about what you don't know.
My car is being worked on just as I described. I am upgrading cams because I feel that the ones I am currently running (JWT) have been damaged to the point where it could POTENTIALLY have a negative long term affect on my car. The current set-up is doing just fine making 530 rwhp with the help of TurboTrix tuning the ProEFI.
YES MY BUILD WAS NOT PERFECT from the start, but it was a learning process that I was not ashamed to share with all of you so hopefully you and the countless others could benefit from the results. I am a DIY type of person and Thousands of folks on this forum and other forums have thanked me for the hours and money I saved them in sharing my results.
I don't know if you are a mechanic or just another wanna be, and frankly I don't care, but I can tell you that I have earned the respect of a lot of the folks on this forum for coming out with the truth about my build despite my many issues. It takes guts to risk a $35,000 car and breaking it down to nuts and bolts. (Don't know how many times u did this?) I put out a lot of my own $$$ into this car and can say that the car now owns me. I am very fortunate to have had this experience and wouldn't trade it for the world. I don't need anyone telling me what to do or how to do it. Especially not you! So unless you have something constructive to offer I would appreciate you to BUTT OUT!
I don't know you and I know you don't know me. If you have something to say that doesn't involve this build that I suggest you take it offline! If you have a direct question you can PM me, but don't come on to just start BS about what you don't know.
My car is being worked on just as I described. I am upgrading cams because I feel that the ones I am currently running (JWT) have been damaged to the point where it could POTENTIALLY have a negative long term affect on my car. The current set-up is doing just fine making 530 rwhp with the help of TurboTrix tuning the ProEFI.
YES MY BUILD WAS NOT PERFECT from the start, but it was a learning process that I was not ashamed to share with all of you so hopefully you and the countless others could benefit from the results. I am a DIY type of person and Thousands of folks on this forum and other forums have thanked me for the hours and money I saved them in sharing my results.
I don't know if you are a mechanic or just another wanna be, and frankly I don't care, but I can tell you that I have earned the respect of a lot of the folks on this forum for coming out with the truth about my build despite my many issues. It takes guts to risk a $35,000 car and breaking it down to nuts and bolts. (Don't know how many times u did this?) I put out a lot of my own $$$ into this car and can say that the car now owns me. I am very fortunate to have had this experience and wouldn't trade it for the world. I don't need anyone telling me what to do or how to do it. Especially not you! So unless you have something constructive to offer I would appreciate you to BUTT OUT!
#288
Z + Rear Seat
iTrader: (3)
Join Date: Jun 2005
Location: St.Pete,FL
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rrmedicx
Idle not as smooth as I'd like it to be. I recycled the cams from the stock motor and then from the last build (that both blew) so my plans were always to replace them anyway (just didn't have the cash at that time). They had some very minor scars on them which I was told could be polished out. Besides the 272 GTM cams are supposed to be the bomb, so I had the interest in upgrading anyway.
Using JWT Springs and retainers.
Using JWT Springs and retainers.
I for one am very happy that you shared your build information with the community... especially all the pictures you took. Thanks!
#295
New Member
iTrader: (13)
Originally Posted by INTENSEPOWER
Back on topic...
Darren (hates to see a legit thread get douched up..)
Darren (hates to see a legit thread get douched up..)
lol i dont think there isnt any drama randy hasnt seen since the thread was started... it was funny to see such an amateur job at trying to douched it up though, randy pwnd the guy well.
#297
Originally Posted by IIQuickSilverII
lol i dont think there isnt any drama randy hasnt seen since the thread was started... it was funny to see such an amateur job at trying to douched it up though, randy pwnd the guy well.
#298
New Member
iTrader: (13)
don't take it personal, this are normal things in a message board either way you look at. I just hope you just see some of thing you brought up from a different perspective.
Have a good day
Have a good day
#299
New Member
iTrader: (3)
Join Date: Nov 2005
Location: Los Angeles
Posts: 2,620
Likes: 0
Received 0 Likes
on
0 Posts
Randy your doing a stellar DIY job on this and it takes a lot of guts to do what you do. Dont pay any mind to lil-jimmy...
BTW - thanks for that radiator. Its as good today as it was when you sent it to me!
BTW - thanks for that radiator. Its as good today as it was when you sent it to me!