15psi on Greddy vs 15psi on JWT
#21
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by JAMEZ@CiNcity
No, jesus, you still don't get it. I'm not trash talking at all, you are. As for doing something different, thats a ****ing riot! Because you're pretty much the only guy in the FI with the JWT kit
. So I ask again, what was the decision making process that went into you choosing the JWT kit. Furthermore, why is the Greddy kit garbage?
I don't even know why I'm asking, because you'll probably dodge this question too.
![Roll Eyes (Sarcastic)](https://my350z.com/forum/images/smilies/rolleyes.gif)
I don't even know why I'm asking, because you'll probably dodge this question too.
![](https://my350z.com/forum/images/smilies/icon20.gif)
#22
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Robert_K
![](https://my350z.com/forum/images/smilies/icon17.gif)
Get over it, you couldn't fight your way out of a paper bag.
And to be honest me leaving to collect myself is advice I might take from you.
One thing should never be brought up on ANY forum is someone's spouse/family.
#23
Registered User
iTrader: (5)
Join Date: Jul 2005
Location: SoCal
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
OKay maybe I missed it, but the OP was notasking for which was better, rather which was better at 15PSI. I know the JWT kit maxes there and the Greddy can go above the 15PSI number....but which one performs better at 15PSI???? I have had cars with both kits and from driving both of them at 15PSI I would rather drive the JWT kit.
So the graddy can produce more power we all know that, but I think at 15PSI you would get more performance out of the JWT kit, not to mention that is lags way less than the Greddy. Maybe someone can answer the question as opposed to arguing about which kit is better.....
So the graddy can produce more power we all know that, but I think at 15PSI you would get more performance out of the JWT kit, not to mention that is lags way less than the Greddy. Maybe someone can answer the question as opposed to arguing about which kit is better.....
#24
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Robert_K
You're right, and I apologize. I was in a bit of
. Also, I am not the only JWT kit. However 90% of F/I owners here are APS/Greddy. As far as my dislike for Greddy I've already mention and has been mentioned. I think Greddy USA has gone E-Bay quailty. They are not the JDM market Trust everyone relates to. Yes the turbos are old and I want BB turbos. Its not a complete kit. The e-Manage is worst than the UTEC. Not saying the UTEC is great by any means. I plan on upgrading to a HalTech or HKS FCon. I didn't want a big FMIC. I saw members having problems with the Greddy kit. Not saying JWT doesn't. However I think APS has the most. The Greddy kit give massive whp numbers I wasn't going for. My goal was more low-end and mid-rnage power for road racing. Not high peak HP for drag racing or 75-150mph hwy rolls. Like mentioned in the F/I for Noobs thread I want the OEM like kit.
![](https://my350z.com/forum/images/smilies/icon20.gif)
Your opinion is so biased and you can't even admit that. APS having the most issues is probably due to a so called friend of yours that you watched take a small issue and make it worse.
I don't preffer the greddy kit, but what has been posted in regards to the power and spool have factual basis. I don't like the kit because of the front impact beam/IC situation. Yes, the old school turbos are a con on paper, but in the real world they are not. Out of all the available kits, I would only recommend the APS or Greddy. I think the JWT has too many limitations and I don't like the layout of the IC or piping.
#26
Registered User
iTrader: (5)
Join Date: Jul 2005
Location: SoCal
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Zivman
Your opinion is so biased and you can't even admit that. APS having the most issues is probably due to a so called friend of yours that you watched take a small issue and make it worse.
I don't preffer the greddy kit, but what has been posted in regards to the power and spool have factual basis. I don't like the kit because of the front impact beam/IC situation. Yes, the old school turbos are a con on paper, but in the real world they are not. Out of all the available kits, I would only recommend the APS or Greddy. I think the JWT has too many limitations and I don't like the layout of the IC or piping.
I don't preffer the greddy kit, but what has been posted in regards to the power and spool have factual basis. I don't like the kit because of the front impact beam/IC situation. Yes, the old school turbos are a con on paper, but in the real world they are not. Out of all the available kits, I would only recommend the APS or Greddy. I think the JWT has too many limitations and I don't like the layout of the IC or piping.
#27
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Navygolf13
I hear what you are syaing about limitations, but if someone doesnt want to go over 15PSI and/or 500-550 rwhp are there really limitations on the JWT kit?
#28
Phenom
![](https://my350z.com/forum/images/ranks/premier.gif)
iTrader: (17)
Join Date: Aug 2005
Location: Greenville SC
Posts: 8,639
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Zivman
I don't trust the ems or fuel system even at 8-10 psi, let alone 15 psi... so yes, there are other limitations.
#29
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Unfortunately, this thread has turned into a "which kit is better" thread, which i stated was not my intent. the topic was how do the TURBOS in a particular kit (NOT THE KIT ITSELF) produce more at a given boost setting compared to another one?
Does it have to do with the housing? The compressor wheels? Does it have to do with the material used in the housing? I've researched the kits, and learned (for the most part) the pros and cons of each kit, but have failed to understand how the turbos used produce more (or less) power at a given boost settings. The Greddys are "old" on paper, yet make consistent and tons of power, and have given BB turbos a bit of competition. Again, the question is "HOW" and "WHY"...not which kit is "superior"
Which then brings me to the HKS TT kit that PF installed. They installed the kit, custom intercooler, Vpro, HKS Navigator, and a RFS (IIRC), and that kit produced a good amount of power at only 8psi, make 430rwhp.
Robert K...thanks for taking my thread off topic. Keep in mind the reason you don't hear of as many JWT kits blowing motors, is because JWT limited sales and installs to only authorized dealers. So no joe-schmo can purchase the kit online and do his own install.
Does it have to do with the housing? The compressor wheels? Does it have to do with the material used in the housing? I've researched the kits, and learned (for the most part) the pros and cons of each kit, but have failed to understand how the turbos used produce more (or less) power at a given boost settings. The Greddys are "old" on paper, yet make consistent and tons of power, and have given BB turbos a bit of competition. Again, the question is "HOW" and "WHY"...not which kit is "superior"
Which then brings me to the HKS TT kit that PF installed. They installed the kit, custom intercooler, Vpro, HKS Navigator, and a RFS (IIRC), and that kit produced a good amount of power at only 8psi, make 430rwhp.
Robert K...thanks for taking my thread off topic. Keep in mind the reason you don't hear of as many JWT kits blowing motors, is because JWT limited sales and installs to only authorized dealers. So no joe-schmo can purchase the kit online and do his own install.
#30
Registered User
iTrader: (5)
Join Date: Jul 2005
Location: SoCal
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by JAMEZ@CiNcity
I definitely would not trust the S/S box.
I have put a little under 10,000 miles on my kit since having it installed and never have had one issue, and most of those miles are track miles driving the car hard. Once again, I still dont see the answer to the OP's question.....which is better at 15 PSI all other things the same. He even wants to know which is better with the same management system, so maybe we can stop debating which kit is better and answer the question.....assume for arguments sake it is with the F-Con......
#31
New Member
iTrader: (18)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Zivman
Your opinion is so biased and you can't even admit that. APS having the most issues is probably due to a so called friend of yours that you watched take a small issue and make it worse.
I don't preffer the greddy kit, but what has been posted in regards to the power and spool have factual basis. I don't like the kit because of the front impact beam/IC situation. Yes, the old school turbos are a con on paper, but in the real world they are not. Out of all the available kits, I would only recommend the APS or Greddy. I think the JWT has too many limitations and I don't like the layout of the IC or piping.
I don't preffer the greddy kit, but what has been posted in regards to the power and spool have factual basis. I don't like the kit because of the front impact beam/IC situation. Yes, the old school turbos are a con on paper, but in the real world they are not. Out of all the available kits, I would only recommend the APS or Greddy. I think the JWT has too many limitations and I don't like the layout of the IC or piping.
#32
New Member
iTrader: (13)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Navygolf13
I have heard this a lot, and I run the S/S box on my kit and have never had any problems. I know that there are limitations on the S/S box but it works and Jim Wolf, in my opinion wouldnt put out a product he didnt believe in. I know there are better management systems, but the S/S box is still better than what you get with the Greddy.....right?
I have put a little under 10,000 miles on my kit since having it installed and never have had one issue, and most of those miles are track miles driving the car hard. Once again, I still dont see the answer to the OP's question.....which is better at 15 PSI all other things the same. He even wants to know which is better with the same management system, so maybe we can stop debating which kit is better and answer the question.....assume for arguments sake it is with the F-Con......
I have put a little under 10,000 miles on my kit since having it installed and never have had one issue, and most of those miles are track miles driving the car hard. Once again, I still dont see the answer to the OP's question.....which is better at 15 PSI all other things the same. He even wants to know which is better with the same management system, so maybe we can stop debating which kit is better and answer the question.....assume for arguments sake it is with the F-Con......
heck of a comeback youa re having..... and yes both both emanage and ss box FTL!... there are way better options even for piggy back emss
#33
Registered User
iTrader: (5)
Join Date: Jul 2005
Location: SoCal
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by IIQuickSilverII
heck of a comeback youa re having..... and yes both both emanage and ss box FTL!... there are way better options even for piggy back emss
#34
New Member
iTrader: (5)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Navygolf13
OKay maybe I missed it, but the OP was notasking for which was better, rather which was better at 15PSI. I know the JWT kit maxes there and the Greddy can go above the 15PSI number....but which one performs better at 15PSI???? I have had cars with both kits and from driving both of them at 15PSI I would rather drive the JWT kit.
So the graddy can produce more power we all know that, but I think at 15PSI you would get more performance out of the JWT kit, not to mention that is lags way less than the Greddy. Maybe someone can answer the question as opposed to arguing about which kit is better.....
So the graddy can produce more power we all know that, but I think at 15PSI you would get more performance out of the JWT kit, not to mention that is lags way less than the Greddy. Maybe someone can answer the question as opposed to arguing about which kit is better.....
i have never seen a 15 PSI greddy vs a 15 PSI JWT dyno before so i can't really say which one is better.. i assume the JWT has the Greddy in the TQ.. but thats maybe about it.. i know the greddy spools at 3250 RPMS.. not sure about the JWT and if anyone would want full boost before that in the first 3 gears..
#35
Registered User
iTrader: (5)
Join Date: Jul 2005
Location: SoCal
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by doug
the JWT has monster torque due to its small piping.. one of the issues it has problems going above 15 PSI..
i have never seen a 15 PSI greddy vs a 15 PSI JWT dyno before so i can't really say which one is better.. i assume the JWT has the Greddy in the TQ.. but thats maybe about it.. i know the greddy spools at 3250 RPMS.. not sure about the JWT and if anyone would want full boost before that in the first 3 gears..
i have never seen a 15 PSI greddy vs a 15 PSI JWT dyno before so i can't really say which one is better.. i assume the JWT has the Greddy in the TQ.. but thats maybe about it.. i know the greddy spools at 3250 RPMS.. not sure about the JWT and if anyone would want full boost before that in the first 3 gears..
#36
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by usingthejohn
Unfortunately, this thread has turned into a "which kit is better" thread, which i stated was not my intent. the topic was how do the TURBOS in a particular kit (NOT THE KIT ITSELF) produce more at a given boost setting compared to another one?
Does it have to do with the housing? The compressor wheels? Does it have to do with the material used in the housing? I've researched the kits, and learned (for the most part) the pros and cons of each kit, but have failed to understand how the turbos used produce more (or less) power at a given boost settings. The Greddys are "old" on paper, yet make consistent and tons of power, and have given BB turbos a bit of competition. Again, the question is "HOW" and "WHY"...not which kit is "superior"
Which then brings me to the HKS TT kit that PF installed. They installed the kit, custom intercooler, Vpro, HKS Navigator, and a RFS (IIRC), and that kit produced a good amount of power at only 8psi, make 430rwhp.
Robert K...thanks for taking my thread off topic. Keep in mind the reason you don't hear of as many JWT kits blowing motors, is because JWT limited sales and installs to only authorized dealers. So no joe-schmo can purchase the kit online and do his own install.
Does it have to do with the housing? The compressor wheels? Does it have to do with the material used in the housing? I've researched the kits, and learned (for the most part) the pros and cons of each kit, but have failed to understand how the turbos used produce more (or less) power at a given boost settings. The Greddys are "old" on paper, yet make consistent and tons of power, and have given BB turbos a bit of competition. Again, the question is "HOW" and "WHY"...not which kit is "superior"
Which then brings me to the HKS TT kit that PF installed. They installed the kit, custom intercooler, Vpro, HKS Navigator, and a RFS (IIRC), and that kit produced a good amount of power at only 8psi, make 430rwhp.
Robert K...thanks for taking my thread off topic. Keep in mind the reason you don't hear of as many JWT kits blowing motors, is because JWT limited sales and installs to only authorized dealers. So no joe-schmo can purchase the kit online and do his own install.
#37
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by rcdash
I have the JWT kit, and I agree with most of the stated issues, but like for any kit, once you know the issues you can address them, particularly if looking for more than out-of-the-box power levels. The only thing you cannot address for all the kits is the support issue associated with the APS. For someone purchasing in the USA, I would not recommend the APS based on this alone. With all the business that APS has received here in the USA, you'd think they'd be better equipped to deal with USA issues right here in the USA. Take the Haltech as an example: these folks are based in Australia also, but they set up USA support through Injected Performance. IP can swap out a faulty unit, cable, accessory overnight. That's the way it should be. I think APS would see a return on investment if they followed this model.
#38
Registered User
iTrader: (3)
Join Date: Dec 2003
Location: Wilmington De
Posts: 961
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Here's my greddy dyno, for whatever it's worth. This isn't a dyno queen. I have 15psi springs in the car, so i can't go any lower than a wastegate only pressure of 13psi. i always rock the car with the boost controller on. the 15psi tune is the dotted line. as you can see, by 3200 rpms, i am making around 375 ft-lbs. of trq. this thread should be informative, not a pissing contest. if any of the jwt or aps guys got their charts lying around, post them up. if you have any questions about the build, click the link in my sig.
![](http://i217.photobucket.com/albums/cc72/teejaywilliams/CARV2_550600whpG35TT.jpg)
#40
Registered User
iTrader: (8)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Robert_K
The Greddy kit give massive whp numbers I wasn't going for. My goal was more low-end and mid-rnage power for road racing. Not high peak HP for drag racing or 75-150mph hwy rolls. Like mentioned in the F/I for Noobs thread I want the OEM like kit.
the small JWT really spools fast from what I have heard, but the greddy isn't exactly slow. the greddy uses fairly large compressors with pretty small turbines to get quick spool but still being able to make huge power. the limiting factor on the greddys is the turbine housing, IMO. with the small turbine housings, you just won't see any greddy cars making power over 7000....most peak out in the low 6000s.
Last edited by QuadCam; 06-01-2008 at 06:30 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM