how do I know which trim of vortech do I have..

Also can anyone provide me a link of the pulley that I should choose on the vortech site?

I want the 3.12 and the 28 cog...I looked over the vortech site but didn't know which are the correct ones..thanks

 

Why not get a 2.87?

 

Well..Here in my country gasoline is not that good...I think the Premium is 89octane..

Also I dont want to mess with Injectors,FMU,etc and im not build...

or can I run stock injectors,vortech FMU,and tune with SS box?with the 2.87

 

Is Miami a "different country" now? Lol~ :-)

 

happy now?!

Are you gonna help me or not?

 

Vortech's basic kit requires 91 octane gas . If you can only get 89 octane you dont even have the correct octane for the car in the first place . But if you must have the Vortech , get the basic kit and it will come with the blower trim you need

 

I already have the vortech and the car is not my DD..when I use the car I mix 109 Sunoco Race and 89oct gas...I just want to know which trim I have..

 

Most likely is the standard Vortech SC, you'll have to look at the impeller, that is one way to tell. Check out this link https://my350z.com/forum/forced-indu...m-vortech.htmlJet mech did a good job writing up his experiences with the SI trim and took some pictures that you may be able to compare to your Vortech. Hope that helps.

 

If you bought the kit new. It is a SQ-trim

 

Im asking the question bc I saw on sentry faq that there is a full and a tuner kit...mine came with the SS box,FMU etc...

 

The tuner kit does not come with the SS box or FMU. Its only the blower, brackets, intercooler, and hardware. You have to add your own engine management system and fuel system.

The full kit comes with everything you need to get the car running.

 

both come with the standard SC-trim

the other trims you have to get/trade in seperately

 

I have a T-Trim kit forsale!!!! $4000 for everything! ANd you cant find this deal anywhere else this price!