Installing my 1st SC on a Friends G35.
02-20-2009, 04:56 AM
#65
OK so the guy (black guy in the vid) whose SC we installed does not pay attention when driving and did not realize that cylinders # 4 and # 6 were missing eventually he blew the piston to shreds on the driver side rear. Cracked the block and the head motor was shot. The cause of the problem was that the valve cover gasket spark plug tube seals were leaking oil into the coil. He said it still felt fine probably due to the SC making it feel like normal. Another problem is that the damn SC is kinda loud so you can't really hear the miss that good as well.
Luckily i found a used motor with 41K on it and we re installed it and re worked the fuel system as well plus got all NEW coil packs plus valve cover gaskets and the new covers as well. ( the damn spark plug seals come attached to the valve covers)
Here are pix of the CLEANER and NEWER motor! He did not want me to go to crazy on the clean since he will be chroming most of the engine in the near future.
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i279.photobucket.com/player.swf?file=http://vid279.photobucket.com/albums/kk159/DoctorVenture/NBFC%20SC%20Install%2003%20G35/MOV01161.flv">
Luckily i found a used motor with 41K on it and we re installed it and re worked the fuel system as well plus got all NEW coil packs plus valve cover gaskets and the new covers as well. ( the damn spark plug seals come attached to the valve covers)
Here are pix of the CLEANER and NEWER motor! He did not want me to go to crazy on the clean since he will be chroming most of the engine in the near future.
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i279.photobucket.com/player.swf?file=http://vid279.photobucket.com/albums/kk159/DoctorVenture/NBFC%20SC%20Install%2003%20G35/MOV01161.flv">
Thread
Thread Starter
Forum
Replies
Last Post
