My Build: The Good, The Bad & The Progress
10-15-2009, 04:18 AM
#2304
Yes, Dave sells the UpRev flash. I got it to remove the speed limiter, change redline and turn of the billion cel codes I throw.
I got you guys, I'm monitoring the A/F gauge when getting into it at all. Please show Dave some respect, when I was doing runs he was in the car with the laptop plugged in doing logging 
. Right now the car gets driven ~ once a week, but when its out it gets treated like Ike treated Tina (for the older guys).
Rain and possible snow showers for the next 4-5 days, so the car will just sit. My area is so hillbilly that they don't put down salt or de-icer on the roads, they drop cinders for traction instead
. Once that happens, the car is away for good until the street sweepers come out in the spring.
Make sure you find that 'loose wire'. What could be worse is that 'extra fuel pump' going away suddenly and causing a much more serious lean condition.
please dont let excitement about having a driveable car cloud what is really going on. If there is an unpredictable fueling/boost situation, there is no way Dave should be condoning WOT runs
. Right now the car gets driven ~ once a week, but when its out it gets treated like Ike treated Tina (for the older guys).Rain and possible snow showers for the next 4-5 days, so the car will just sit. My area is so hillbilly that they don't put down salt or de-icer on the roads, they drop cinders for traction instead
. Once that happens, the car is away for good until the street sweepers come out in the spring.
10-15-2009, 04:24 AM
#2305
Sorry quick hijack Chris....
With the Uprev can you have the ECU not throw certain codes?
Like if I wanted my random misfire codes to not throw CEL's and cat inefficiency it could? That way when I did get a CEL it would be for real.
See where Im going with this....
With the Uprev can you have the ECU not throw certain codes?
Like if I wanted my random misfire codes to not throw CEL's and cat inefficiency it could? That way when I did get a CEL it would be for real.
See where Im going with this....
10-15-2009, 04:30 AM
#2306
I re-read your post and yes, you can turn off specific codes only. I know this because I currently have a cel light from installing the extra walbros because the fuel temp sensor has been disconnected.
10-15-2009, 05:46 AM
#2308
Oh slap!
I know you guys were watching gauges the 1st 2 times the motor went. I know i'd be quite cautious.
+1 on the beginning of the cold winter.
So you have the triple pump going now? Hows it been with low tank levels?
Also a 2.2 -2.4k ohm resistor fixes that tank temp light. Thats what I used.
I know you guys were watching gauges the 1st 2 times the motor went. I know i'd be quite cautious.
+1 on the beginning of the cold winter.
So you have the triple pump going now? Hows it been with low tank levels?
Also a 2.2 -2.4k ohm resistor fixes that tank temp light. Thats what I used.
Last edited by str8dum1; 10-15-2009 at 05:47 AM.
10-15-2009, 06:13 AM
#2309
One of the very first mods I had done to my Z was a full blue LED mod. I was not a huge fan of the factory orange and there was a member, Acree, who was doing this and other similar mods. Having just gotten my car, I wasn't very comfortable trying to disassemble it to send the parts out for the conversion, so I ended up flying Acree up from Texas to do the mods for me.
I decided on pearl white gauge faces with blue numbers. The gauges turn black with blue numbers at night when the lights are on. Acree did all the dash LEDs as well as the HVAC controls and the door controls. This mod was crazy labor intense and very technical, but Acree did a perfect job!! Acree has since gone back to school full time and is not doing this mod anymore to the best of my knowledge, but there was another member offering this service, however I cannot speak for his quality of work.
Gauges can be purchased here: http://www.blackcatcustom.com/
Attachment 220289 Attachment 220290 Attachment 220291
Attachment 220292 Attachment 220293
I decided on pearl white gauge faces with blue numbers. The gauges turn black with blue numbers at night when the lights are on. Acree did all the dash LEDs as well as the HVAC controls and the door controls. This mod was crazy labor intense and very technical, but Acree did a perfect job!! Acree has since gone back to school full time and is not doing this mod anymore to the best of my knowledge, but there was another member offering this service, however I cannot speak for his quality of work.
Gauges can be purchased here: http://www.blackcatcustom.com/
Attachment 220289 Attachment 220290 Attachment 220291
Attachment 220292 Attachment 220293
Chris the build looks great. I think your Z is faster than your R1 now, no?
-Acree
10-15-2009, 06:17 AM
#2310
Oh slap!
I know you guys were watching gauges the 1st 2 times the motor went. I know i'd be quite cautious.
For sure, the issue was too rich, not too lean, but I hear you bro.
+1 on the beginning of the cold winter.
So you have the triple pump going now? Hows it been with low tank levels?
Hard to say yet since the fuel gauge isn't working at the moment, the float is hung up, so I just get gas every ~200 miles, usually takes 12-14 gals at that point
Also a 2.2 -2.4k ohm resistor fixes that tank temp light. Thats what I used.
Thanks, we haven't even addressed the small issues yet, that is what winter wil be for.
I know you guys were watching gauges the 1st 2 times the motor went. I know i'd be quite cautious.
For sure, the issue was too rich, not too lean, but I hear you bro.
+1 on the beginning of the cold winter.
So you have the triple pump going now? Hows it been with low tank levels?
Hard to say yet since the fuel gauge isn't working at the moment, the float is hung up, so I just get gas every ~200 miles, usually takes 12-14 gals at that point
Also a 2.2 -2.4k ohm resistor fixes that tank temp light. Thats what I used.
Thanks, we haven't even addressed the small issues yet, that is what winter wil be for.
10-15-2009, 07:05 AM
#2314
Acree did this all for me in a day!! This kid is amazing, hard to belive he gave up this cash cow.
Maybe for enough cash he could be coaxed out of retirement
10-15-2009, 08:30 AM
#2320
Dave didn't have many nice things to say about it and asked if I wanted to replace it with the CJM setup, but SP makes them work and if its good enough for Tom it should be good enough for me. Plus I kinda got the ***** of buying things twice, ya know.