SP350Z 1248 RWHP Video
03-22-2009, 11:39 AM
#41
Vendor - Former Vendor
iTrader: (11)
Join Date: Oct 2003
Location: San Diego
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
Awesome!!!!!!Those billet 67's will get you to 1500 pretty easily.But I think you might have to figure out how to plumb in another set of rails and injectors! I am just wondeirng is the bock will shear in half with so much power put through it! LOL
Great job! Headgames heads FTW!
Good job guys!
03-23-2009, 09:10 AM
#48
Registered User
Join Date: Dec 2007
Location: Valrico, FL
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
1200+ RHP on a VQ3.5 DE motor
Thus far, WOW!!
03-23-2009, 09:28 AM
#49
Registered User
Blah open deck vs closed deck....that argument has been going on forever it feels like on every forum.
Thankfully there is connecting hardware out there nowadays that can hold everything together. I don't know if there is a FI car out there that doesn't have some blow by, its inherit really, but no blow by issues.
Larry talked about the oil pressure earlier.......hasn't really looked at that gauge during the pulls as much as A/F lol.......but if oil pressure was dropping at these levels you'd probably find out in a BIG hurry........screeeeeeeeeeah boom....knock knock knock knock....
lol
keep it up boys
also, once you get to these power levels on any gasoline motor you are kinda working on borrowed time. Stress on metals is cumulative so eventually something has to fail....hopefully not for a long time though.
tom
Thankfully there is connecting hardware out there nowadays that can hold everything together. I don't know if there is a FI car out there that doesn't have some blow by, its inherit really, but no blow by issues.
Larry talked about the oil pressure earlier.......hasn't really looked at that gauge during the pulls as much as A/F lol.......but if oil pressure was dropping at these levels you'd probably find out in a BIG hurry........screeeeeeeeeeah boom....knock knock knock knock....
lol
keep it up boys
also, once you get to these power levels on any gasoline motor you are kinda working on borrowed time. Stress on metals is cumulative so eventually something has to fail....hopefully not for a long time though.
tom
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM
StreetStandard
Videos
2
02-04-2016 09:44 AM
Justin100
Intake Exhaust
26
11-29-2015 03:58 PM
