Have a water/meth kit? Come in here...
#1
Turbo Whore
Thread Starter
iTrader: (4)
Join Date: Oct 2002
Location: West suburbs of Chi-town
Posts: 7,303
Likes: 0
Received 1 Like
on
1 Post
Have a water/meth kit? Come in here...
Ok, the time has come to install a water/meth kit in my car. I'm going to use my factory washer fluid res. and want a progressive system with a way to monitor flow (since I'm still running the UTEC for the rest of this season and can't control it through there).
Anyone have a setup like that and any advice on which brand is the best quality and user friendliness? I'm planning on installing and tuning this myself as I've done with the rest of my car.
Anyone have a setup like that and any advice on which brand is the best quality and user friendliness? I'm planning on installing and tuning this myself as I've done with the rest of my car.
#3
Registered User
iTrader: (38)
I had an aquamist system in my old Z, but couldn't tell you exactly which model it was. No complaints with it tho, and it was actuated by a boost pressure module, I believe.
I also used the washer reservoir.
There are a few threads on this, which I'm sure you've read. I like the Aquamist stuff personally.
I also used the washer reservoir.
There are a few threads on this, which I'm sure you've read. I like the Aquamist stuff personally.
#4
New Member
iTrader: (11)
the new coolingmist controller is very nice. use that with their flow sensor and you'll be all set.
Thats what I am going to use if I ever stop using my UTEC to control my meth solenoid. But for right not, the UTEC works just fine and I am not missing progressive spraying.
Thats what I am going to use if I ever stop using my UTEC to control my meth solenoid. But for right not, the UTEC works just fine and I am not missing progressive spraying.
#5
Turbo Whore
Thread Starter
iTrader: (4)
Join Date: Oct 2002
Location: West suburbs of Chi-town
Posts: 7,303
Likes: 0
Received 1 Like
on
1 Post
the new coolingmist controller is very nice. use that with their flow sensor and you'll be all set.
Thats what I am going to use if I ever stop using my UTEC to control my meth solenoid. But for right not, the UTEC works just fine and I am not missing progressive spraying.
Thats what I am going to use if I ever stop using my UTEC to control my meth solenoid. But for right not, the UTEC works just fine and I am not missing progressive spraying.
Trending Topics
#8
Vendor - Former Vendor
iTrader: (4)
Join Date: Jun 2009
Location: Fontucky, CA
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
I personally use the Stage 3 Water/Meth kit from Snow Performance...been using Snow for the last 2 years with zero issues!!!
I'd be happy to help you get a good price with their kit!
Scott
I'd be happy to help you get a good price with their kit!
Scott
#10
Registered User
iTrader: (1)
Join Date: Sep 2007
Location: Texas, Arizona,Cayman Island
Posts: 5,256
Likes: 0
Received 0 Likes
on
0 Posts
The "Mad Scientist" uses the AlkyControl system.....It was one of the first setups used in this community....and he is still using it....
So now you have 3 to pick from
#13
Turbo Whore
Thread Starter
iTrader: (4)
Join Date: Oct 2002
Location: West suburbs of Chi-town
Posts: 7,303
Likes: 0
Received 1 Like
on
1 Post
You mean HFS-6? Google didn't like "aquamist HSF-6".
The HFS-6 looks pretty trick, but I don't know if something that automated is necessary, plus it's about twice as much as other progressive kits. I'm going to have to do a lot more research. LOTS of different options out there.
The HFS-6 looks pretty trick, but I don't know if something that automated is necessary, plus it's about twice as much as other progressive kits. I'm going to have to do a lot more research. LOTS of different options out there.
#14
Professional
iTrader: (2)
Here is a link to the drawing for my Coolingmist system. I'm changing over to direct port injection, so the meth will flow from the valves will flow into a distribution block, and then out to 6 injectors. Everything else is the roughly the same.
http://home.comcast.net/~kf1167/pwpi...4958486d575816
http://home.comcast.net/~kf1167/pwpi...4958486d575816
Last edited by ttg35fort; 07-22-2009 at 12:26 AM.
#20
Cranky FI Owner
iTrader: (14)
Meth line
Controller
3 gallon tank-I still havent used it all since May 08', but its almost empty.
605/530 as my weakest power level is conservative?
Controller
3 gallon tank-I still havent used it all since May 08', but its almost empty.
Originally Posted by star8dum1
Why are your running such a conservative pump gas map? Too much power for the street?