UK Vortech Build Log *Pic Heavy*
#22
Registered User
Thread Starter
iTrader: (2)
Join Date: May 2009
Location: england
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
I'm having a few problems running......
I had to play around with the str8dum1's map to get the car to start and idle properly....so that is now fine. I took the car out for a little test drive and had the management light on and noticed the car wouldn't get over 2k revs...so the car was in limp mode. So this morning i did an ecu reset which cleared the light, but when i took it out on the road it was real lumpy and just didn't want to accelerate
My car goes into for a tune on the 10th of feb but i would like to get it to a reasonable driving state before getting there. Any idea's?
i have uploaded my map here...
http://www.mediafire.com/file/jt4hyhmtzyj/utec.TXT
cheers
I had to play around with the str8dum1's map to get the car to start and idle properly....so that is now fine. I took the car out for a little test drive and had the management light on and noticed the car wouldn't get over 2k revs...so the car was in limp mode. So this morning i did an ecu reset which cleared the light, but when i took it out on the road it was real lumpy and just didn't want to accelerate
My car goes into for a tune on the 10th of feb but i would like to get it to a reasonable driving state before getting there. Any idea's?
i have uploaded my map here...
http://www.mediafire.com/file/jt4hyhmtzyj/utec.TXT
cheers
Last edited by nurrishd; 01-31-2010 at 02:23 AM.
#23
Registered User
Thread Starter
iTrader: (2)
Join Date: May 2009
Location: england
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Just tried the the Tnetics 550cc base map off turbsoxs.com and low and behold my car now drives without any hesitation....maybe str8dum1's map was too much for my car.
#27
New Member
Join Date: Sep 2004
Location: Bayamon, Puerto Rico
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Question to you nurrishd!
I’m waiting my kit. Is a T-Trim tuner kit and will come without an intercooler.
I’ll have to buy one and see that yours is huge and still have the bumper brace.
Did you have to mod it to fit?
I’m waiting my kit. Is a T-Trim tuner kit and will come without an intercooler.
I’ll have to buy one and see that yours is huge and still have the bumper brace.
Did you have to mod it to fit?
#29
New Member
Join Date: Sep 2004
Location: Bayamon, Puerto Rico
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
I’ll find out soon. Was thinking the same ,custom piping 3”.
#30
New Member
iTrader: (2)
hey nurrishd.. I had my Vortech Installed last week and had to get it tuned this week.. but my tuner told me that the 600cc's were too big for 7-8psi boost..
I have the 3.12 pulley and a Stillen TD. I see about 8psi boost and about 350hp and use UTEC as well..
what did you do?
can you maybe send me your timing log?
or a map, that could help me out..
B/C i feel 350hp with the 3.12 pulley and TD exhaust is a little.... little!
I have the 3.12 pulley and a Stillen TD. I see about 8psi boost and about 350hp and use UTEC as well..
what did you do?
can you maybe send me your timing log?
or a map, that could help me out..
B/C i feel 350hp with the 3.12 pulley and TD exhaust is a little.... little!
#32
I now have this kit now Erdem. Abbey Motorsport are the best in the UK and their preference is Uprev, but they can map UTEC as well.
My build thread is here: https://my350z.com/forum/forced-indu...-the-pond.html
My build thread is here: https://my350z.com/forum/forced-indu...-the-pond.html
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM
Tochigi_236
Feedback & Suggestions for Our Forum
8
09-27-2015 03:40 PM