Sneak Peak At Vortech System
#102
Registered User
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by zland
I suggest to anyone that has a turbo or this type of SC to let the car run for 30 secs before driving and idle for 30 secs too before shutting it off to allow lubrication, especially for a turbo since it spins so fast and will just be running without lubrication if you dont do it.
I suggest to anyone that has a turbo or this type of SC to let the car run for 30 secs before driving and idle for 30 secs too before shutting it off to allow lubrication, especially for a turbo since it spins so fast and will just be running without lubrication if you dont do it.
I think this is a good rule of thumb for a normally aspirated engine as well. At least the start up part.
As for waiting to shut down this is not necessary for an SC. Turbos sit in the exhaust wake and get super hot. Shutting down too early stops oil circulation and lets the oil sit in the turbo and fry. AKA oil coking.
Correct me if I'm wrong but why does the SC need this? It gets no hotter than the engine.
#103
Registered User
Join Date: May 2003
Location: Houston, TX
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by damen
does anyone know just how much work would be needed to fabricate the kit to fit the G35?
does anyone know just how much work would be needed to fabricate the kit to fit the G35?
#105
Registered User
Join Date: Feb 2003
Location: maryland
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Ralphus
You should make a thread on g35driver.com and see if there's interest. If you get some responses you could point Vortech to the link and maybe they'd make a kit with the correct piping.
You should make a thread on g35driver.com and see if there's interest. If you get some responses you could point Vortech to the link and maybe they'd make a kit with the correct piping.
#107
Sponsor
Sport Z Magazine
Sport Z Magazine
This is a website used by 350Z owners. We do get information but sometimes it is messy and after much debate. If you need tech support, go to superchargersonline.com They have techs you can address questions to about SC issues including questions specific to a particular SC company such as ATI or Vortec.
In addition, call the manufacture of the SC you want information on. Do a search, you can find a companies website and phone number that way. I called Vortec today and got all the answers I wanted. I did the same with ATI months before. The way I feel about it, if the manufacture will not give you time to answer your questions now, then they will most likely ignore you after you already spent your money thus I would scratch them off my list for that reason alone.
In addition, call the manufacture of the SC you want information on. Do a search, you can find a companies website and phone number that way. I called Vortec today and got all the answers I wanted. I did the same with ATI months before. The way I feel about it, if the manufacture will not give you time to answer your questions now, then they will most likely ignore you after you already spent your money thus I would scratch them off my list for that reason alone.
Last edited by zland; 11-03-2003 at 02:27 PM.
#110
Sponsor
Sport Z Magazine
Sport Z Magazine
Originally posted by Forced
We will have a G35 system for sure. We just need to get one in here to verify all the goodies.
We will have a G35 system for sure. We just need to get one in here to verify all the goodies.
Last edited by zland; 11-03-2003 at 02:33 PM.
#111
Sponsor
Sport Z Magazine
Sport Z Magazine
Steve/Forced:
I knew once we finished our phone conversation I would have a couple of questions.
1. If this kit is self installed, does it come with step by step installation directions?
2. If I had questions during the install, is there techs you have that can give specific answers to my questions relative to problems that might occur during installation?
Thanks, Jeff
I knew once we finished our phone conversation I would have a couple of questions.
1. If this kit is self installed, does it come with step by step installation directions?
2. If I had questions during the install, is there techs you have that can give specific answers to my questions relative to problems that might occur during installation?
Thanks, Jeff
#112
Registered User
iTrader: (1)
Join Date: May 2002
Location: Las Vegas
Posts: 1,955
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by edubbzzz
OMG , 412hp/355tq, ummm i can taste those Z06's now, bye bye EVO's, Z yaa lata SRT-4's, HOW DO I GET ONE I WANT IN NOW!!!!!
Thankz,
Erich
OMG , 412hp/355tq, ummm i can taste those Z06's now, bye bye EVO's, Z yaa lata SRT-4's, HOW DO I GET ONE I WANT IN NOW!!!!!
Thankz,
Erich
#113
Registered User
Join Date: May 2003
Location: Brooklyn, NY
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
AHHHH. Thats ok NOTHING a little 75 SHOT cant do for us, dont forget i dont wanna start this "WAR" again, with all my mods i still wont cost as MUCH AS A Z06!!!!!
BTW, yours stats for the Z06 ARE with a "PROFESSIONAL DRIVER", majority of the GUYS out there AREN'T!!!!!!
LaterZZZZ,
Erich
BTW, yours stats for the Z06 ARE with a "PROFESSIONAL DRIVER", majority of the GUYS out there AREN'T!!!!!!
LaterZZZZ,
Erich
#114
Registered User
Thread Starter
Join Date: Jun 2003
Location: SoCal
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by zland
Steve/Forced:
I knew once we finished our phone conversation I would have a couple of questions.
1. If this kit is self installed, does it come with step by step installation directions?
2. If I had questions during the install, is there techs you have that can give specific answers to my questions relative to problems that might occur during installation?
Thanks, Jeff
Steve/Forced:
I knew once we finished our phone conversation I would have a couple of questions.
1. If this kit is self installed, does it come with step by step installation directions?
2. If I had questions during the install, is there techs you have that can give specific answers to my questions relative to problems that might occur during installation?
Thanks, Jeff
#115
Registered User
iTrader: (1)
Join Date: May 2002
Location: Las Vegas
Posts: 1,955
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by edubbzzz
AHHHH. Thats ok NOTHING a little 75 SHOT cant do for us, dont forget i dont wanna start this "WAR" again, with all my mods i still wont cost as MUCH AS A Z06!!!!!
BTW, yours stats for the Z06 ARE with a "PROFESSIONAL DRIVER", majority of the GUYS out there AREN'T!!!!!!
LaterZZZZ,
Erich
AHHHH. Thats ok NOTHING a little 75 SHOT cant do for us, dont forget i dont wanna start this "WAR" again, with all my mods i still wont cost as MUCH AS A Z06!!!!!
BTW, yours stats for the Z06 ARE with a "PROFESSIONAL DRIVER", majority of the GUYS out there AREN'T!!!!!!
LaterZZZZ,
Erich
What stats? Torque and HP? What's a professional driver got to do with that?
You can pick up a clean 2002 Z06 for under $40,000. I had one, and I like the Z better, but my $37,464 track model will end costing a lot more to even come close to that kind of power.
#119
Charter Member #55
Join Date: May 2002
Location: Austin, TX
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
ZZ,
You obviously are instigating an argument. Which as a long term member you know is a no-no. And there is no reason to be rude to someone asking you to take your discussion to a different thread.
Back on Topic,
Steve- Thanks for all the info. You have been very helpful and quick to respond to questions. Your presence here has definitely been a positive one for Vortech. I will be interested in seeing how easy the self installation process turns out to be.
Thanks again,
JD
You obviously are instigating an argument. Which as a long term member you know is a no-no. And there is no reason to be rude to someone asking you to take your discussion to a different thread.
Back on Topic,
Steve- Thanks for all the info. You have been very helpful and quick to respond to questions. Your presence here has definitely been a positive one for Vortech. I will be interested in seeing how easy the self installation process turns out to be.
Thanks again,
JD
#120
Registered User
iTrader: (2)
Join Date: Jun 2003
Location: Carrollton TX
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
my question to any one is why is it that the ATI Procharger put out 370rwhp at 7psi and the vortech won't be able to do that at 8psi? Its claiming 412 crank hp, so ruff estimate would be 350rwhp? Any comments?