ATI V.P. claims procharger won at drag strip
#21
Originally posted by max2000jp
The ATI car puts down more rwhp than a Z06, which run low-mid 12's. I would expect a ATI equipped Z to match or better that.
The ATI car puts down more rwhp than a Z06, which run low-mid 12's. I would expect a ATI equipped Z to match or better that.
#22
Registered User
Join Date: Nov 2003
Location: Vortechville,CA
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
wow
lol.....mid 13 runs with 320RWHP - 350RWHP.................thats some funny *** ****....................i have ran 13.241 at Sacramento Raceway with over 106mph trap with only exhuast, pulleys, injen and 55hp hit of ZEX..............that "PRO" driver sure is Pro..............like I said before and someone slammed me for saying it, if I had 340RWHP i would be deep into the 12's at over 110
#23
Registered User
Join Date: Jun 2002
Location: Chicago, IL
Posts: 1,551
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by GaryK
Approximately the same peak rwhp, but not very close on torque. The z06 is lighter as well. With equal drivers, the z06 will easily beat it in the quarter.
Approximately the same peak rwhp, but not very close on torque. The z06 is lighter as well. With equal drivers, the z06 will easily beat it in the quarter.
#24
Registered User
Join Date: Nov 2003
Location: Vortechville,CA
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
lol
Originally posted by GaryK
Approximately the same peak rwhp, but not very close on torque. The z06 is lighter as well. With equal drivers, the z06 will easily beat it in the quarter.
Approximately the same peak rwhp, but not very close on torque. The z06 is lighter as well. With equal drivers, the z06 will easily beat it in the quarter.
all the 350Z needs to do is get 430hp-435hp at the crank and the power to weight ratio is better to the Z06 and after 430hp the torque factor difference between a blown Z and a stock Z06 becomes a non-factor as the HP number is to great to overcome by the Z06 Torque..........Z06 loses if I was driving.
Last edited by fluidz; 12-17-2003 at 05:48 PM.
#25
Unless somebody can run low, low 12's in a z with the ATI kit, it won't be very close. An ATI equipped z will weigh 3300 to 3350 at least, and the z06 will be in the 3100 to 3150 range. That alone is worth a couple tenths. The torque advantage is enough to amount to something, probably another 3 or 4 tenths...
#27
Sponsor
Sport Z Magazine
Sport Z Magazine
Join Date: Jul 2002
Location: Larkspur, Colorado
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: It was not private
Originally posted by MSGarrett1
Yeah . . . fight . . . fight. No really . . . I noticed the same thing. I think it's funny that Sport Z went through all the trouble of not releasing this info in another thread, then the V.P of ATI comes out and gives us info anyway.
What I REALLY want to see is the V.P. of ATI and the editor of Sport Z magazine to get into it. !!! Yeah . . . .yeah My money is on Bob of Sport Z . . . nice guy. I hope he sues ATI for leaking the info
Yeah . . . fight . . . fight. No really . . . I noticed the same thing. I think it's funny that Sport Z went through all the trouble of not releasing this info in another thread, then the V.P of ATI comes out and gives us info anyway.
What I REALLY want to see is the V.P. of ATI and the editor of Sport Z magazine to get into it. !!! Yeah . . . .yeah My money is on Bob of Sport Z . . . nice guy. I hope he sues ATI for leaking the info
Sue ATI, hmmm. You may be surprised at what action I've put into play. BTW, his info is INCOMPLETE & WORTHLESS BY ITSELF AND HE SHOULD KNOW THAT AND STAND BY OUR AGREEMENT.
Bob
#28
Registered User
Join Date: Nov 2002
Location: NOR - CAL
Posts: 4,686
Likes: 0
Received 0 Likes
on
0 Posts
I did 13.4 N/A
All this desk chair quarter backing and devil's advocate stuff is getting old. 13.4 blown at 320-350rwhp SUCKS!
Can anyone here be real for one day and just say the times blow?
Stock Z06? I will hand him his hat next season, they are top end cars not 1/4 cars.
13.4 NA! Great 60' lousy trap (ET Streets.)
All this desk chair quarter backing and devil's advocate stuff is getting old. 13.4 blown at 320-350rwhp SUCKS!
Can anyone here be real for one day and just say the times blow?
Stock Z06? I will hand him his hat next season, they are top end cars not 1/4 cars.
13.4 NA! Great 60' lousy trap (ET Streets.)
#29
Registered User
Join Date: Nov 2003
Location: Vortechville,CA
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
dude 12secZ
Originally posted by 12SecZ
I did 13.4 N/A
All this desk chair quarter backing and devil's advocate stuff is getting old. 13.4 blown at 320-350rwhp SUCKS!
Can anyone here be real for one day and just say the times blow?
Stock Z06? I will hand him his hat next season, they are top end cars not 1/4 cars.
13.4 NA! Great 60' lousy trap (ET Streets.)
I did 13.4 N/A
All this desk chair quarter backing and devil's advocate stuff is getting old. 13.4 blown at 320-350rwhp SUCKS!
Can anyone here be real for one day and just say the times blow?
Stock Z06? I will hand him his hat next season, they are top end cars not 1/4 cars.
13.4 NA! Great 60' lousy trap (ET Streets.)
13.4 blown at 320-350rwhp SUCKS!.............dude you hit it on the head.............like i said give me 350rwhp.............i will bet you 1,000,000 dollars i hit 12.6 at over 110mph on 50% Proxie tires running 90 degrees out in Northern California summer heat, **** i figure every 10hp to the wheels equates to damn near 1/10th. go figure..............ran 14.09 stock (230rwhp).....................13.241 (300rwhp) with mods..............give me 50RWHP more and im deep into the 12's..................the equation is very simple, its all about P/W Ratios..............yes a good driver is needed, if you suck go to driving school and learn how to drive.
Last edited by fluidz; 12-17-2003 at 06:46 PM.
#31
Registered User
Join Date: Nov 2003
Location: Vortechville,CA
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
NICE
Originally posted by 12SecZ
I'll see ya there in the 12's I race at Sac Raceway near EDH too.
I'll see ya there in the 12's I race at Sac Raceway near EDH too.
Cant Wait, I hope the Dreamworkes kit is as good as they say!!!!!!
#33
Sponsor
Sport Z Magazine
Sport Z Magazine
Join Date: Jul 2002
Location: Larkspur, Colorado
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Re: It was not private
Originally posted by Jim Jones
It is posted on this forum. The point is, maybe not everyone here reads every word of every post, and might have wanted to know that. I found it interesting.
If you don't like my posts, just don't read my threads. Don't get on them to call me a trouble maker. GFY.
It is posted on this forum. The point is, maybe not everyone here reads every word of every post, and might have wanted to know that. I found it interesting.
If you don't like my posts, just don't read my threads. Don't get on them to call me a trouble maker. GFY.
Bob
#34
Registered User
Join Date: Nov 2003
Location: Vortechville,CA
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: It was not private
Originally posted by publisher
Jones, I'm not mad yet -- but I'm getting there.
Bob
Jones, I'm not mad yet -- but I'm getting there.
Bob
dont worry about the facts so much..................its just life take it ez................you like beer?
#35
Registered User
Join Date: Apr 2003
Location: North Jersey
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
....wait a min. ATI cheated? if it's true that's funny ish!!!
p.s. i never understood how 1 driver is supposed to run good times in 3 completely different cars...i know there all Z's, but they all have different superchargers, putting out different #'s....how could he possibly know how to launch each one in the little time he drove them/practiced on them? i just figured, he's a pro, he'll know what he's doin....
p.s. i never understood how 1 driver is supposed to run good times in 3 completely different cars...i know there all Z's, but they all have different superchargers, putting out different #'s....how could he possibly know how to launch each one in the little time he drove them/practiced on them? i just figured, he's a pro, he'll know what he's doin....
#36
Sponsor
Sport Z Magazine
Sport Z Magazine
Join Date: Jul 2002
Location: Larkspur, Colorado
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by durobred
....wait a min. ATI cheated? if it's true that's funny ish!!!
p.s. i never understood how 1 driver is supposed to run good times in 3 completely different cars...i know there all Z's, but they all have different superchargers, putting out different #'s....how could he possibly know how to launch each one in the little time he drove them/practiced on them? i just figured, he's a pro, he'll know what he's doin....
....wait a min. ATI cheated? if it's true that's funny ish!!!
p.s. i never understood how 1 driver is supposed to run good times in 3 completely different cars...i know there all Z's, but they all have different superchargers, putting out different #'s....how could he possibly know how to launch each one in the little time he drove them/practiced on them? i just figured, he's a pro, he'll know what he's doin....
Bob
#37
Registered User
Join Date: Nov 2002
Location: NOR - CAL
Posts: 4,686
Likes: 0
Received 0 Likes
on
0 Posts
That is my point, there is no win or loose it's a write up review, so why is one company saing they one and pulling down websites Forums et al? Just wierd.
It's a shoot out not a race. People like numbers though, those dang Dyno numbers! Live and die by them (not me.)
Shame on the company's actions tsk tsk.
It's a shoot out not a race. People like numbers though, those dang Dyno numbers! Live and die by them (not me.)
Shame on the company's actions tsk tsk.
#38
Originally posted by 12SecZ
All this desk chair quarter backing and devil's advocate stuff is getting old. 13.4 blown at 320-350rwhp SUCKS!
Can anyone here be real for one day and just say the times blow?
All this desk chair quarter backing and devil's advocate stuff is getting old. 13.4 blown at 320-350rwhp SUCKS!
Can anyone here be real for one day and just say the times blow?
I ran a 13.6 with just pulleys, an Injen CAI, and some ET's!!!!!........$5K for 2 tenths?.......hell yeah that sucks!!!!!