Boosted Performance single turbo fabrication
#64
New Member
iTrader: (11)
too bad you cant just easily wire teh pump into the fuel pump harness.
that stays on for 1.5s after the car is turned off. more than enough time to clear the times without a check valve. I just use a turbo timer on mine, but my sump is a ~quart, so its all overkill
that stays on for 1.5s after the car is turned off. more than enough time to clear the times without a check valve. I just use a turbo timer on mine, but my sump is a ~quart, so its all overkill
Last edited by str8dum1; 05-10-2012 at 04:51 PM.
#65
Now that it is in there, it works great. Not even the slightest hint of burnt oil.
The reservoir (in my case) only has to hold the oil that is inside the turbo, and that really is a small amount.
#71
OGPremierMafia
iTrader: (16)
Join Date: Feb 2005
Location: Cincinnati OH
Posts: 5,106
Likes: 0
Received 0 Likes
on
0 Posts
Sasha, if it can withstand the abuse It had during the last week.. I am fairly certain it can withstand just about anything.
Drag Racing, High Speed Runs, Mountain pass driving, all without reprieve. As much as I wanted more power, the car is so responsive with the current setup I doubt I am going to switch.
Drag Racing, High Speed Runs, Mountain pass driving, all without reprieve. As much as I wanted more power, the car is so responsive with the current setup I doubt I am going to switch.
#72
Thanks for the compliment and the input on the other forum.
Good to hear Don, I am glad it is performing in all aspects of driving...as it was intended.
Sasha, if it can withstand the abuse It had during the last week.. I am fairly certain it can withstand just about anything.
Drag Racing, High Speed Runs, Mountain pass driving, all without reprieve. As much as I wanted more power, the car is so responsive with the current setup I doubt I am going to switch.
Drag Racing, High Speed Runs, Mountain pass driving, all without reprieve. As much as I wanted more power, the car is so responsive with the current setup I doubt I am going to switch.
#73
OGPremierMafia
iTrader: (16)
Join Date: Feb 2005
Location: Cincinnati OH
Posts: 5,106
Likes: 0
Received 0 Likes
on
0 Posts
Ive got a couple HPDE scheduled this spring and summer Ill report back when I know more. It is time though to upgrade radiators and make a more sold intake mount. I also need to quiet this thing down open dumps are just deafening.
#74
A bit of an update on this build...the jigs are now complete. Six kits are going to be built in the next couple of months, I have deposits on three of the 6 kits, with another on the fence.
Jigs...the first one was a lot of fun:
Jigs...the first one was a lot of fun:
Last edited by Boosted Performance; 10-07-2012 at 10:47 AM.