Boosted Performance single turbo fabrication
#142
![Default](https://my350z.com/forum/images/icons/icon1.gif)
#143
hatersgonnahate
![](https://my350z.com/forum/images/ranks/premier.gif)
iTrader: (162)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
LOL, the AEM nonsense and Vaporware has been going on since 2004 around here..LMAO...The largest plug and play ECU in the aftermarket world and they never supported the Z33 platform, but made stuff for every Honda Civic ever made..Boy did they loose some money in the peak of the FI game around here.. I can tell you from past experiences, it will NEVER come out for the Z33 at this point. There really is no point in making one now, it wont sell. Who will pay $2500 for an ECU for a car they paid $5000 for used..
Ill throw out two part numbers, you can research them and then go pound sand.
AEM 30-7107
AEM 30-3520
Its like the old drunk has come back to his old stomping grounds cause he has no where else to go. At first i was going to tolerate you but you just wont give up and are just looking for a e-fight.
We get it, you were a swinging dick back in the day. No one gives a ****. Honestly. Go back to being a miserable old fart elsewhere.
#144
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Look, we get it. You're trying to come on here and start **** and rag on all 350z's. You left but you came back for a reason but want to play the big badd *** and downplay everyone here, pound your chest and swing your dick. Congrats...you win on the internet.
Ill throw out two part numbers, you can research them and then go pound sand.
AEM 30-7107
AEM 30-3520
Its like the old drunk has come back to his old stomping grounds cause he has no where else to go. At first i was going to tolerate you but you just wont give up and are just looking for a e-fight.
We get it, you were a swinging dick back in the day. No one gives a ****. Honestly. Go back to being a miserable old fart elsewhere.
Ill throw out two part numbers, you can research them and then go pound sand.
AEM 30-7107
AEM 30-3520
Its like the old drunk has come back to his old stomping grounds cause he has no where else to go. At first i was going to tolerate you but you just wont give up and are just looking for a e-fight.
We get it, you were a swinging dick back in the day. No one gives a ****. Honestly. Go back to being a miserable old fart elsewhere.
#2 when did AEM finally release that? looks interesting, how has it worked? I been out of the game for so long..
#3 I will not go away I will stay as long as I see fit..
#4 I do have a big swinging dick thank you very much!!
![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)
#145
hatersgonnahate
![](https://my350z.com/forum/images/ranks/premier.gif)
iTrader: (162)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
hell i dont know when they released it. No one is really paying them any attention.
As I just learned...go with what your tuner knows. If no tuners are pushing AEM then it wont sell on this platform. Just like when UTEC was on top....the FCON...and now haltech/uprev. Its all in what the shops and tuners push.
Proefi never took off too well either.
As I just learned...go with what your tuner knows. If no tuners are pushing AEM then it wont sell on this platform. Just like when UTEC was on top....the FCON...and now haltech/uprev. Its all in what the shops and tuners push.
Proefi never took off too well either.
#147
![Default](https://my350z.com/forum/images/icons/icon1.gif)
hell i dont know when they released it. No one is really paying them any attention.
As I just learned...go with what your tuner knows. If no tuners are pushing AEM then it wont sell on this platform. Just like when UTEC was on top....the FCON...and now haltech/uprev. Its all in what the shops and tuners push.
Proefi never took off too well either.
As I just learned...go with what your tuner knows. If no tuners are pushing AEM then it wont sell on this platform. Just like when UTEC was on top....the FCON...and now haltech/uprev. Its all in what the shops and tuners push.
Proefi never took off too well either.
That AEM unit looks exactly like and works just like the pro EFI on Volumetric Efficiency. VERY slick unit..If it was around back in 2006-2007 they would have cleaned house with that unit. I was reading up on some of its features and it seems far superior to anything I can recall being out for the Z at the time.
#148
![Default](https://my350z.com/forum/images/icons/icon1.gif)
You have come in here and started making some assumptions about products that you know nothing about. Other than being a self proclaimed "pioneer", saying that you have done this community a huge favour. I have yet to see a constructive post to back any of your "pioneering".
Also, according to this thread:
https://my350z.com/forum/forced-indu...torsports.html
most of the community at the time was very happy to see you go. So one can suspect that you weren't the "pioneer" you claimed to be.
IMO Charles at CJ-Motorsports is a person who can be classified as a pioneer on this platform, because he has made a lot of engineering changes to the fueling system to make high powered cars a reality. He also did it in a professional manner, which will go a long way when working with people/customers. This is something you seem to be lacking. Knowledge on building turbo systems (or in your case purchasing an APS TT kit) and building engines can be derived from other platforms by studying the failures....like spun bearings which were common back then. Who would have thought that you need to "loosen" the clearances when trying to double/triple the power output of an internal combustions engine..![](https://my350z.com/forum/images/smilies/icon14.gif)
This turbo kit is the perfect example, because you are like a noob, that hasn't done any research on the product, components used, capability, and on and off the track results. Instead you simply stated that it is a "stupid design". It is a low mount turbo, so what? If you are such a "pioneer" why didn't you develop a true twin scroll design turbo system back then, and make it fit in the engine bay? Everybody knows that a twin scroll system will be 5-7% more efficient than a tangential turbo design due to scavenging. It will also be capable of producing the same results as a twin turbo kit (as per dyno charts I posted in the other thread) and be $1,500 cheaper (not to mention the install cost) ....so why did it take so long if the community had such brilliant minds in 2007? It is indeed a system that almost any customer with basic mechanical skills can install....and yes, that is true, but you don't know it since you have not seen the installation manual.
All I am saying is that the community along with the products available has changed since 2007, so please read up before bashing products that have proven themselves over the past few years.
This turbo business is just a side thing for me. I have a dream day job (has nothing to do with the automotive industry/fabricating), and build these kits when I have time, during the long winters. It is something I enjoy doing. The demand is high enough that I could go full-time, but I don't want to do that. I enjoy fabricating, but on my own time. There is a lot more I could do as I have a lot of ideas, but I am happy with where things are. The 370z twin scroll kits are keeping me plenty busy because the results seen from my customers are fantastic:
http://rttuning.com/boosted-performa...g-nissan-370z/
Also, according to this thread:
https://my350z.com/forum/forced-indu...torsports.html
most of the community at the time was very happy to see you go. So one can suspect that you weren't the "pioneer" you claimed to be.
IMO Charles at CJ-Motorsports is a person who can be classified as a pioneer on this platform, because he has made a lot of engineering changes to the fueling system to make high powered cars a reality. He also did it in a professional manner, which will go a long way when working with people/customers. This is something you seem to be lacking. Knowledge on building turbo systems (or in your case purchasing an APS TT kit) and building engines can be derived from other platforms by studying the failures....like spun bearings which were common back then. Who would have thought that you need to "loosen" the clearances when trying to double/triple the power output of an internal combustions engine..
![](https://my350z.com/forum/images/smilies/icon14.gif)
This turbo kit is the perfect example, because you are like a noob, that hasn't done any research on the product, components used, capability, and on and off the track results. Instead you simply stated that it is a "stupid design". It is a low mount turbo, so what? If you are such a "pioneer" why didn't you develop a true twin scroll design turbo system back then, and make it fit in the engine bay? Everybody knows that a twin scroll system will be 5-7% more efficient than a tangential turbo design due to scavenging. It will also be capable of producing the same results as a twin turbo kit (as per dyno charts I posted in the other thread) and be $1,500 cheaper (not to mention the install cost) ....so why did it take so long if the community had such brilliant minds in 2007? It is indeed a system that almost any customer with basic mechanical skills can install....and yes, that is true, but you don't know it since you have not seen the installation manual.
All I am saying is that the community along with the products available has changed since 2007, so please read up before bashing products that have proven themselves over the past few years.
This turbo business is just a side thing for me. I have a dream day job (has nothing to do with the automotive industry/fabricating), and build these kits when I have time, during the long winters. It is something I enjoy doing. The demand is high enough that I could go full-time, but I don't want to do that. I enjoy fabricating, but on my own time. There is a lot more I could do as I have a lot of ideas, but I am happy with where things are. The 370z twin scroll kits are keeping me plenty busy because the results seen from my customers are fantastic:
http://rttuning.com/boosted-performa...g-nissan-370z/
#149
![Default](https://my350z.com/forum/images/icons/icon1.gif)
You have come in here and started making some assumptions about products that you know nothing about. Other than being a self proclaimed "pioneer", saying that you have done this community a huge favour. I have yet to see a constructive post to back any of your "pioneering".
Also, according to this thread:
https://my350z.com/forum/forced-indu...torsports.html
most of the community at the time was very happy to see you go. So one can suspect that you weren't the "pioneer" you claimed to be.
IMO Charles at CJ-Motorsports is a person who can be classified as a pioneer on this platform, because he has made a lot of engineering changes to the fueling system to make high powered cars a reality. He also did it in a professional manner, which will go a long way when working with people/customers. This is something you seem to be lacking. Knowledge on building turbo systems (or in your case purchasing an APS TT kit) and building engines can be derived from other platforms by studying the failures....like spun bearings which were common back then. Who would have thought that you need to "loosen" the clearances when trying to double/triple the power output of an internal combustions engine..![](https://my350z.com/forum/images/smilies/icon14.gif)
This turbo kit is the perfect example, because you are like a noob, that hasn't done any research on the product, components used, capability, and on and off the track results. Instead you simply stated that it is a "stupid design". It is a low mount turbo, so what? If you are such a "pioneer" why didn't you develop a true twin scroll design turbo system back then, and make it fit in the engine bay? Everybody knows that a twin scroll system will be 5-7% more efficient than a tangential turbo design due to scavenging. It will also be capable of producing the same results as a twin turbo kit (as per dyno charts I posted in the other thread) and be $1,500 cheaper (not to mention the install cost) ....so why did it take so long if the community had such brilliant minds in 2007? It is indeed a system that almost any customer with basic mechanical skills can install....and yes, that is true, but you don't know it since you have not seen the installation manual.
All I am saying is that the community along with the products available has changed since 2007, so please read up before bashing products that have proven themselves over the past few years.
This turbo business is just a side thing for me. I have a dream day job (has nothing to do with the automotive industry/fabricating), and build these kits when I have time, during the long winters. It is something I enjoy doing. The demand is high enough that I could go full-time, but I don't want to do that. I enjoy fabricating, but on my own time. There is a lot more I could do as I have a lot of ideas, but I am happy with where things are. The 370z twin scroll kits are keeping me plenty busy because the results seen from my customers are fantastic:
http://rttuning.com/boosted-performa...g-nissan-370z/
Also, according to this thread:
https://my350z.com/forum/forced-indu...torsports.html
most of the community at the time was very happy to see you go. So one can suspect that you weren't the "pioneer" you claimed to be.
IMO Charles at CJ-Motorsports is a person who can be classified as a pioneer on this platform, because he has made a lot of engineering changes to the fueling system to make high powered cars a reality. He also did it in a professional manner, which will go a long way when working with people/customers. This is something you seem to be lacking. Knowledge on building turbo systems (or in your case purchasing an APS TT kit) and building engines can be derived from other platforms by studying the failures....like spun bearings which were common back then. Who would have thought that you need to "loosen" the clearances when trying to double/triple the power output of an internal combustions engine..
![](https://my350z.com/forum/images/smilies/icon14.gif)
This turbo kit is the perfect example, because you are like a noob, that hasn't done any research on the product, components used, capability, and on and off the track results. Instead you simply stated that it is a "stupid design". It is a low mount turbo, so what? If you are such a "pioneer" why didn't you develop a true twin scroll design turbo system back then, and make it fit in the engine bay? Everybody knows that a twin scroll system will be 5-7% more efficient than a tangential turbo design due to scavenging. It will also be capable of producing the same results as a twin turbo kit (as per dyno charts I posted in the other thread) and be $1,500 cheaper (not to mention the install cost) ....so why did it take so long if the community had such brilliant minds in 2007? It is indeed a system that almost any customer with basic mechanical skills can install....and yes, that is true, but you don't know it since you have not seen the installation manual.
All I am saying is that the community along with the products available has changed since 2007, so please read up before bashing products that have proven themselves over the past few years.
This turbo business is just a side thing for me. I have a dream day job (has nothing to do with the automotive industry/fabricating), and build these kits when I have time, during the long winters. It is something I enjoy doing. The demand is high enough that I could go full-time, but I don't want to do that. I enjoy fabricating, but on my own time. There is a lot more I could do as I have a lot of ideas, but I am happy with where things are. The 370z twin scroll kits are keeping me plenty busy because the results seen from my customers are fantastic:
http://rttuning.com/boosted-performa...g-nissan-370z/
![Roll Eyes (Sarcastic)](https://my350z.com/forum/images/smilies/rolleyes.gif)
I noticed that you ignored Julian's question about why OEM manufacturers and race teams don't use low mid-mount turbo systems. If it's so great/superior/advantageous... why don't they?
(BTW... I'm taking a screenshot of this, in case you decide to save face by deleting this thread like you did with your diff brace thread after I called you out on your BS.
![Wink](https://my350z.com/forum/images/smilies/wink.gif)
#150
![Default](https://my350z.com/forum/images/icons/icon1.gif)
![Roll Eyes (Sarcastic)](https://my350z.com/forum/images/smilies/rolleyes.gif)
My results are proven with facts, EBP results and dyno charts. There is nothing else to it. It is as simple as that. You can put whatever twist you want on it, I don't really care. I have even said that for those that could not make 500whp on pump on a DD with your precious T3 turbo, to simply upgrade to a T4 unit (just change the up-pipe flange). No other changes to the kit itself are necessary. You took that as if I was saying the top mount kit is a POS. That is your issue, not my. It is worth noting that when one company copies somebody else's kit, they should probably do some testing...find the flaws, and correct them. (this is something Momentum tried to do) It is something completely different when one goes and develops a completely new kit and does the testing from the ground up, the mid mount kit and the twin scroll kit are good examples of this.
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
![bowrofl](https://my350z.com/forum/images/smilies/bowrofl.gif)
That thread was not going anywhere and since I have not made any of those for anybody, and was just sharing my results, it was best for it to disappear. Clearly some of the old guys are coming back, and I am sure they have done some incredible engineering during the 7 year absence. So, I will wait for these products to be released, so that the new generation of owners can take this platform to the next level.
This thread is also gone waaaay off topic, and since it is my thread, I will get it cleaned up. Feel free to spend the rest of the day taking screen shots of all the posts before they are removed.
Last edited by Boosted Performance; 05-31-2014 at 10:15 AM.
#151
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Nice attempt once again to rewrite history and create your own narrative.
You strongly insinuated that your competitors were lying and misleading customers about their kits' performance capabilities. The mods let you run amuck as you slung mud and slandered other vendors' integrity ...and you know it. The staff on this site unfortunately has shown an ongoing habit of favoritism (especially in the FI section) for select vendors rather than maintaining a level playing field of fairness and impartiality for all vendors. It's a repetitive cycle based on forum popularity. It seems that you now enjoy the "perks" that GTM and Forged once had on this forum. Enjoy it while it lasts... karma is a biatch.
![Roll Eyes (Sarcastic)](https://my350z.com/forum/images/smilies/rolleyes.gif)
#152
Registered User
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Well if you guys are done sword fighting with your ego's...
Few questions I have that I believe has not been asked...
1. How much weight is this entire turbo kit?
2. Being that it is easy to install, sits low...water damage? thieves steal it unbolting turbo kit? or a jack *** puts **** in your turbo charger....
3. This kit come with a cat back or you need to modify it to bolt to aftermarket exhaust a customer may already have?
4. Will this pass emmissions? is there a kit that comes with a hfc?
Few questions I have that I believe has not been asked...
1. How much weight is this entire turbo kit?
2. Being that it is easy to install, sits low...water damage? thieves steal it unbolting turbo kit? or a jack *** puts **** in your turbo charger....
3. This kit come with a cat back or you need to modify it to bolt to aftermarket exhaust a customer may already have?
4. Will this pass emmissions? is there a kit that comes with a hfc?
Last edited by Toneloc; 05-31-2014 at 03:37 PM.
#153
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Because it's a stupid stupid stupid fawking idea, plain and simple..OEM manufacturers who believe in performance as well as reliability for long term use, place their turbos under the hood, near the manifolds..Not next to the transmissions, in the trunk or under the car where the muffler goes..Why? Cause its a STUPID IDEA...
As far as that thread you linked, many forum members smelled blood and were fooled, including RudeG, by a well orchestrated series of lies about me. People like Romey, took advantage of me, Sam @GTM fuked me (and we all know what has been happeneing with the almighty GTM these days)and the entire forum turned on me.
The truth eventually surfaced and people who remember back then know the deal. I ran the most honest, NO NONSENSE shop you will ever see. Romey took advantage of me, and without me being his friend and giving him all sorts of crazy discounts, his car NEVER would have been near the level it was.
I lifted the heads on the dyno, and offered to fix it for free and start the motor pull right there. He insisted to take the car back despite it having a hurt motor, and brought me back a piston welded to a cylinder wall on Monday morning. I couldnt warranty negligence, and he turned it around on me. Despite the fact a video surfaced of him racing a Corvette to 150 mph that weekend on a hurt motor..
At the same time all the engines I bought from GTM were literally falling apart, zero fault of my own..
Sam and Romey turned the whole thing around on me and people hated me..It was of no help that I came off as quite the ******* on the forums and rubbed alot of people the wrong way...I got sick of the BS, the drama and left the scene..
I still tune some cars here and there for a few friends who own shops, and do it because I love it. I would never open another business and deal with the BS associated with it..
#154
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I dont know if you remember the thread where I sent a GTM motor out to be inspected and measured by an expert engine builder and machinist. It was all sorts of out of whack..Sam rallied the nutswingers and Romey took his back and they destroyed me..
I was hated cause I called a spade a spade and always swam against the tide.. I saw through Sams Bull Shat a long time ago..
Last edited by Dajersyrat; 05-31-2014 at 06:37 PM.
#155
Registered User
![Default](https://my350z.com/forum/images/icons/icon1.gif)
sometimes I wish mods would go back through informational threads and delete the stupid post that have nothing to do with the turbo kit or people that bash it...
#157
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Well if you guys are done sword fighting with your ego's...
Few questions I have that I believe has not been asked...
1. How much weight is this entire turbo kit?
2. Being that it is easy to install, sits low...water damage? thieves steal it unbolting turbo kit? or a jack *** puts **** in your turbo charger....
3. This kit come with a cat back or you need to modify it to bolt to aftermarket exhaust a customer may already have?
4. Will this pass emmissions? is there a kit that comes with a hfc?
Few questions I have that I believe has not been asked...
1. How much weight is this entire turbo kit?
2. Being that it is easy to install, sits low...water damage? thieves steal it unbolting turbo kit? or a jack *** puts **** in your turbo charger....
3. This kit come with a cat back or you need to modify it to bolt to aftermarket exhaust a customer may already have?
4. Will this pass emmissions? is there a kit that comes with a hfc?
2. Water has not been an issue. The filter is well protected since it is just behind the starter. I would not drive through deep water though..but that is common sense. As for theft...don't know what to tell ya...if somebody has enough time, I am sure they could steal it.
3. The kit is built so it can be bolted on to the OEM exhaust on the DE engines, and OEM and Fast Intentions exhaust on the VHR cars.
4. Not sure what you have for emission tests in your area. HFC can be added to the kit. Performance will however suffer.
You can also ask Hal@Dynosty about the kit. He has tuned and installed a number of these now, and knows them very well.
Last edited by Boosted Performance; 05-31-2014 at 10:14 PM.
#158
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Because it's a stupid stupid stupid fawking idea, plain and simple..OEM manufacturers who believe in performance as well as reliability for long term use, place their turbos under the hood, near the manifolds..Not next to the transmissions, in the trunk or under the car where the muffler goes..Why? Cause its a STUPID IDEA...
As far as that thread you linked, many forum members smelled blood and were fooled, including RudeG, by a well orchestrated series of lies about me. People like Romey, took advantage of me, Sam @GTM fuked me (and we all know what has been happeneing with the almighty GTM these days)and the entire forum turned on me.
The truth eventually surfaced and people who remember back then know the deal. I ran the most honest, NO NONSENSE shop you will ever see. Romey took advantage of me, and without me being his friend and giving him all sorts of crazy discounts, his car NEVER would have been near the level it was.
I lifted the heads on the dyno, and offered to fix it for free and start the motor pull right there. He insisted to take the car back despite it having a hurt motor, and brought me back a piston welded to a cylinder wall on Monday morning. I couldnt warranty negligence, and he turned it around on me. Despite the fact a video surfaced of him racing a Corvette to 150 mph that weekend on a hurt motor..
At the same time all the engines I bought from GTM were literally falling apart, zero fault of my own..
Sam and Romey turned the whole thing around on me and people hated me..It was of no help that I came off as quite the ******* on the forums and rubbed alot of people the wrong way...I got sick of the BS, the drama and left the scene..
I still tune some cars here and there for a few friends who own shops, and do it because I love it. I would never open another business and deal with the BS associated with it..
As far as that thread you linked, many forum members smelled blood and were fooled, including RudeG, by a well orchestrated series of lies about me. People like Romey, took advantage of me, Sam @GTM fuked me (and we all know what has been happeneing with the almighty GTM these days)and the entire forum turned on me.
The truth eventually surfaced and people who remember back then know the deal. I ran the most honest, NO NONSENSE shop you will ever see. Romey took advantage of me, and without me being his friend and giving him all sorts of crazy discounts, his car NEVER would have been near the level it was.
I lifted the heads on the dyno, and offered to fix it for free and start the motor pull right there. He insisted to take the car back despite it having a hurt motor, and brought me back a piston welded to a cylinder wall on Monday morning. I couldnt warranty negligence, and he turned it around on me. Despite the fact a video surfaced of him racing a Corvette to 150 mph that weekend on a hurt motor..
At the same time all the engines I bought from GTM were literally falling apart, zero fault of my own..
Sam and Romey turned the whole thing around on me and people hated me..It was of no help that I came off as quite the ******* on the forums and rubbed alot of people the wrong way...I got sick of the BS, the drama and left the scene..
I still tune some cars here and there for a few friends who own shops, and do it because I love it. I would never open another business and deal with the BS associated with it..
I have showed you dyno charts,and you had no comments because you did not expect to see those kinds of numbers, and that kind of efficiency out of a single turbo kit. I have said that these kits are very reliable, because the components used are proven to be of great quality/reliability. Feel free to search the forums...it won't take you long to figure that out.
BTW, the twin scroll kit puts the turbo closer to the manifolds than any other single kit, so once again, the least you can do is have a look at some pictures...you don't even have to read anything. I have had my kit on the car for over 30,000 miles. Same Tial wastegates, same Tial BOV, same Exa pump...ect. I have switched to the newer PTE BB turbo, but that is about it. The car is tuned by me with the Haltech and is sitting at just over 450whp and 420ft/tq (DJ) on 94 pump gas. Sounds like this is a lot more reliable than anything that came out of your shop during the "pioneering" days.
As for your excuses, so far evidence (in the form of your posts/attitude/ignorance) is against you.
Last edited by Boosted Performance; 05-31-2014 at 10:35 PM.
#159
Registered User
iTrader: (4)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
i generally dont bother coming on this useless forum anymore except to browse classifieds but the ecu has been out for AWHILE, i worked directly with sam santerre on the project and was the first vq35 outside AEM to run the ecu. not only has it been available for about 8 months now but the infinity-6 is now out and supports the vq35 as well for $1500 entry fee. people will buy it because it offers motec level performance at a fraction of the price. having tuned pro efi on another platform, haltech on this one, and the infinity it is WELL worth the price. just a small example, haltech idle oscillated 150 rpms using a mustang cheap *** china throttle body, infinity is able to get that down to 50 rpms, pretty much what you would see stock. it always irritated me but i was fine with it chalking it up to me buying a cheap part, until i used the infinity.
it is the ecu i recommend to my customers as well as several others who are not. i wouldnt run anything else at this point unless i was forced to by something like not being supported by the ecu.
edit:my bad seems you already saw its been out for a little bit now. what i can tell you about it is i had my car running in 15 minutes on it once final firmware was done, although having a pre release ecu i ended up having to send it in to get a motherboard update as it would break up past 5k rpms. the ease of tuning is stellar and it has alot of potential with customizing channels.
it is the ecu i recommend to my customers as well as several others who are not. i wouldnt run anything else at this point unless i was forced to by something like not being supported by the ecu.
edit:my bad seems you already saw its been out for a little bit now. what i can tell you about it is i had my car running in 15 minutes on it once final firmware was done, although having a pre release ecu i ended up having to send it in to get a motherboard update as it would break up past 5k rpms. the ease of tuning is stellar and it has alot of potential with customizing channels.
LOL, the AEM nonsense and Vaporware has been going on since 2004 around here..LMAO...The largest plug and play ECU in the aftermarket world and they never supported the Z33 platform, but made stuff for every Honda Civic ever made..Boy did they loose some money in the peak of the FI game around here.. I can tell you from past experiences, it will NEVER come out for the Z33 at this point. There really is no point in making one now, it wont sell. Who will pay $2500 for an ECU for a car they paid $5000 for used..
Last edited by jerryd87; 06-01-2014 at 12:42 AM.
#160
Registered User
iTrader: (4)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
my wifes escape is technically a low mount turbo, it can drain to the pan but you really cant mount a turbo any lower anywhere else on the car.
in specifics to the BP kit design even though i dont run it anymore(really just due to my specific requirements and never being happy with anything i dont build) its about the shortest possible exhaust pathway to keep heat high in the exhaust so it has the maximum velocity when entering the turbo. as to where you mount it, where he does is a short exhaust path for most people. if you move the radiator forward and relocate the power steering however(if you dont run ac) theres alot of room up front.............
@ the irony and hypocrisy in your post. You have a lot of nerve to act sanctimoniously after engaging in a negative marketing campaign and slandering your competitors in the DE market (especially those with decades of professional experience who don't dabble in this industry as a part-time hobby such as yourself).
I noticed that you ignored Julian's question about why OEM manufacturers and race teams don't use low mid-mount turbo systems. If it's so great/superior/advantageous... why don't they?
(BTW... I'm taking a screenshot of this, in case you decide to save face by deleting this thread like you did with your diff brace thread after I called you out on your BS.
)
in specifics to the BP kit design even though i dont run it anymore(really just due to my specific requirements and never being happy with anything i dont build) its about the shortest possible exhaust pathway to keep heat high in the exhaust so it has the maximum velocity when entering the turbo. as to where you mount it, where he does is a short exhaust path for most people. if you move the radiator forward and relocate the power steering however(if you dont run ac) theres alot of room up front.............
![Roll Eyes (Sarcastic)](https://my350z.com/forum/images/smilies/rolleyes.gif)
I noticed that you ignored Julian's question about why OEM manufacturers and race teams don't use low mid-mount turbo systems. If it's so great/superior/advantageous... why don't they?
(BTW... I'm taking a screenshot of this, in case you decide to save face by deleting this thread like you did with your diff brace thread after I called you out on your BS.
![Wink](https://my350z.com/forum/images/smilies/wink.gif)