I know this is an old topic, but I still can't figure it out the correct routing for this catch can with the vortech. I use to have just connect the pcv and the plenum outlet to the left of the catch can and plug the right hand side of the can. On the passenger side rocket cover to the vortech intake. But, I got ton of oil blow by and CEL light on (p0300). My Vortech seals and gear just recently got rebuilt, so I do not think the oil leak is from the seal.
So, today, I re-route the catch can. I did left the pcv and plenum connect to the left side of the can and driver side valve cover outlet to right side of the catch can. Bacsically all in the same can. I started the car and the cel was gone, but i am scare to drive before i ask you guys first. Please help

I attached a diagram that roughly explaine how I route it.

Thanks again.Doc1.docx

 

I'll check the diagram when I get home, but I did find a thread on how to correctly route mine. Sounds correct but I don't understand your wording on the re-route.

 

Sorry for the wording. I mean I re-run the hose for the catch can. Thanks for your help.

 

anyone can help????