For all the Z gurus,

After considerable reading and thinking I came up with this modification list, therefore, could you please take a look at the list and give me your comments.

Thanks,
Az

PS: The e-Manage will be hooked up to an in Z PC

------------------------------------------------------------------
The List:

Bridgestone Potenza S-03 Pole Position - P245/40ZR18
Bridgestone Potenza S-03 Pole Position - P275/40ZR18
NISMO Front Alloy Wheel - LM GT4, 18x8.5J (+25) Silver
NISMO Rear Alloy Wheel - LM GT4, 18x9.5J (+25 or +30) Silver
NISMO Wing

NISMO R-tune 350Z Set of Camshafts VQ35
SGP Racing / Pauter Forged Rod Set for the VQ35DE
SGP Racing 8.5:1 Forged piston Set for the VQ35DE
SGP/ARP Head and Main Studs for VQ35DE
SGP Racing Titanium Retainer Set for the VQ35DE

RC Engineering 6x 440cc injectors
GReddy Twin Turbo Kit - TD05H-18Gs with Intercooler and e-Manage PC software
High Pressure Fuel Pump 255LPH

NISMO Lightened Flywheel
NISMO Clutch Disc
NISMO Clutch Pressure Plate
NISMO Exhaust System including Headers

Nissan Earth System Grounding Kit - ERTH-350Z

NISMO Front and Rear Sway Bar Set
NISMO S-tune Suspension Set (Springs + Shocks)

 

Looks like a nice wish list.

Are you stuck on NISMO?

When you getting your Z?

 

only one problem i can see. if you want those s03 you might wanna order them now and you might get them by summer. there is a 3 month wait on anything 245 and up on s03s.

 

I have a 04 track 6MT

Q) Are you stuck on NISMO?

1) I like the wheels, they serve the purpose and look good
2) camshafts: Will out of all the brands out there, I think the NISMO ones are some where in the middle not too wild.
3) Clutch and related: from everything I read I think they NISMO can handle the power gains and are for every day use
4) Exhaust System: I like the sound tone
5) Suspension: If it was made by the people that made the Z I will take there word for it.

So, no I'm not stuck on NISMO

Az

 

If you want the Greddy Twin Turbo...

Why does your title talk about Vortech??????????????

 

Oppssss , That was the old plan, sorry.

Will chnage now

 

You don't want a lightened flywheel with a turbo... or so I've heard...

 

sure now just hit the lottery to afford all that.

 

hummmm, why

 

How did you know

its only around $23K so divide that by 730 $31.50 a day. Thats not bad

 

You dont want to use those NISMO cams on FI like the Greddy Turbo.

 

OK. Cam's out.

Thanks

 

few things...

1) You can get all that stuff for $20K including shipping...
2) Why do you want the headers if your getting a Turbo Kit?
3) The twin turbo kit includes the RC 440cc Injectors
4) The rods SGP use you can get at other places for about $136 cheaper

 

So true, the headers were on the list because I was going with a SC rather than a TT. But very good points.

On the other hand, the turbo kit only include 4 injectors, I want six. Last, I will do better search for parts.

Thanks

Az

 

I have a similar list If you want to contact me on AOL (JspecG35) or private message I can help you find cheaper places since that's what i've been trying to figure out lately with my free time

 

What?

I HIGHLY doubt the kit only comes with 4 injectors. I'll go out on a limb and say it does come with six. Why would it come with 2 less injectors than needed?

 

Thats not necessarily true. It depends more on what your going to use the car for. Not what's done to the car's engine.

 

Check it out GReddy 350Z TT It comes with 4

 

That is a TYPO. 6 is what the kit comes with

 

Cool Thanks. I was wondering why, but then I said, what do I know. I thought it might be something with the ECU or something