g35life

iTrader: (-1)

I am almost at a point where I will be installing my turbo kit.

I need to get my o2 bung welded in for the wideband. I am looking at 24" away from the turbo along the downpipe.


Has anyone with this kit welded in their wideband in a spot that's not too crammed ? It's hard for me to visualize how exactly the pipe will be in relation to the car itself, transmission tunnel. etc.




Any help ?

g35life

iTrader: (-1)

?

iideadeyeii

iTrader: (6)

I'm looking in my godspeed build, but I can't see where I welded it in.
I need to reinstall my front sway bar and re-set my wideband this weekend so I can take a look then.

iideadeyeii

iTrader: (6)

It's on the left pipe i think sticking almost straight up near the curve where it goes down I believe

iideadeyeii

iTrader: (6)

Black bung right behind the other o2 sensor. Feels accurate where it is.

g35life

iTrader: (-1)

thats kind far.... from the turbo... interesting

iideadeyeii

iTrader: (6)

There's plenty of room to install it right after the turbo on the down pipe(straight up), but don't think you are going to be able to take it out or install the o2 sensor when that pipe is bolted in.

That being said, I've had this Godspeed(now called Rev9) kit on my car for 8 years and never had any issues except with needing to add graphite gaskets to the v-bank flanges to stop them from leaking. I do beat the hell out of my car and do not baby it anywhere

Joshuag56

I welded both secondary’s on my downpipe and ended up having to move drivers side primary to the downpipe up by where the turbo is